The other day, a detailed article was published on our resource on how to jailbreak iOS 9.3.3 without a computer, using a mobile browser and without entering Apple ID details. After some time, the method stopped working, because. However, the hackers were able to rework the instructions and make them relevant to the jailbreak community again. The updated "manual" is available for viewing below!
Attention!
- Before jailbreaking, you need to back up the data on your device via iCloud or iTunes.
- It is preferable to jailbreak on iOS version 9.3.3, as it fixes many bugs and improves security.
- Supported devices list: iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone SE, iPod Touch 6G, iPad mini 2, iPad mini 3, iPad mini 4, iPad Air, iPad Air 2, iPad Pro.
How to jailbreak iOS 9.2 - iOS 9.3.3 from a browser without a computer?
Step 1: Open this article from the Safari browser on your iOS device.
Step 2: From your mobile device, go to this link .
Step 3: Click on the install button on the left side of the page.
Step 5: The PP app will start downloading to your device. Open Control Center and watch the app download carefully. Once the status changes from "Loading" to "Installing", enable Airplane Mode for successful installation. Once the installation is complete, Airplane Mode can be turned off.
Step 6: After successfully downloading the application to the device, you need to go to Settings - General - Device management. Select Beijing Hong Yuan Online Technology and click double trust.
Step 7: Now back to the main screen and launch the PP app. We agree with the OK button to send notifications. We remove the bird opposite the PP below and click on the circle.
Step 8: After that, lock your device, wait 6 seconds, you will receive a notification that the jailbreak was successful.
Step 9: Now let's unlock our device, launch the PP app again. You will see a circle with a loading animation. Once completed, the device will reboot and Cydia will appear. Launch Cydia. Ready!
Please note that the jailbreak is semi-tethered, that is, after each reboot of the device, you will need to launch the PP application and click on the circle.
Freshly baked jailbreak iOS 9.2 - 9.3.3 caused many users problems during installation - the first version of the exploit is traditionally not stable, there is no application for Mac, and the user's password. However, there is an alternative option to hack iOS.
The browser version of the Pangu jailbreak was released by the hitherto unknown Totoa Team (TT) and does not require an iPhone or iPad to be connected to the computer via a Lightning cable, all you need to gain access to is a supported device (any iDevice based on a 64-bit processor), the presence stable Internet connection and standard Safari browser.
Preparing for jailbreak:
1
. You need to disable the lock screen passcode and Touch ID;
2
. Disable feature " Find iPhone» along the way Settings -> iCloud;
3
. Back up your device (just in case).
Video instruction:
How to jailbreak iOS 9.2 - iOS 9.3.3 without a computer and entering an Apple ID in a couple of minutes
Performing the jailbreak procedure itself is even easier than in the case of a desktop application:
1 . To get started, go to this link, click the " Open" and " Install«.
The download process of the Pangu app will begin;
2 . The moment the download status of the Pangu app changes from "" to " Installation". Open Control Center (swipe up from the bottom of the screen) and turn on airplane mode ( possible through Settings -> Airplane mode).
3
. After installation is complete, disable airplane mode.
4
. Go to menu " Settings —> Main —> Device management"and confirm the trust in the profile from the developer" Beijing Hong Yuan Online Technology«;
5
. Now we launch the application "PP ****" (where * are Chinese characters) and confirm the sending of notifications;
6
. A large circle will appear in the center - click on it and wait for the download;
7
. When the following screen is displayed (screenshot below), you should lock the device with the Power button and wait for push notifications to arrive, which can be ignored;
8
. The device will automatically reboot (twice) - the jailbreak is installed.
Cydia crashes after iOS 9.2 jailbreak – iOS 9.3.3, what should I do? Solution
If, after installing the jailbreak in the manner described above, Cydia closes immediately after launch ("crashes"), then you should repeat the procedure, starting from the 3rd point ().
Installing a jailbreak on the iPad will allow you to hack the current operating system file system, for example for game applications. Many users ask the question: is it possible and how to remove the "jailbreak"?
Jailbreak for iPad - a special section containing a plan of measures for tethered and untethered jailbreak - "jailbreak" that allows you to jailbreak iPad with any version of iOS. The jailbreak process occurs when using the software applications "PanGu", "Redsn0w" or "evasi0n". There are special instructions in the subsections of the system that provide the procedure for installing hacked programs, modified firmware, and eliminating iTunes system errors. On an iPad without a jailbreak, you cannot run a new jailbroken version of iOS 5 and higher.
What types of jailbreak iPad 2, iPad 1, iPad 3, iPad Mini are there?
"Tethered jailbreak" or tied jailbreak on the iPad 2 allows you to access the files of the Apple iPad system until the tablet is rebooted or turned off. When a new power-on follows, for the iPad 5 jailbreak it may not boot at all or after downloading, the applications will not be able to fully work. Therefore, it is distinguished by the fact that it is tied to a PC and cannot function without it.
Semi-tethered jailbreak or semi-tethered jailbreak is similar to the previous one, except that it can allow you to reboot the tablet without connecting to a computer. In this case, you cannot use Cydia software applications and its tweaks, Mail or Safari. As a result, it is tied to a PC connection that will launch and download the necessary files to it.
Untethered jailbreak or untethered jailbreak is installed on the iPad once before the need to install a new software firmware. With it, you can open the path to the files of the operating system the next time you boot iOS 10 without any extra effort.
Types of jailbreak versions
The latest jailbreak v.1.2.0 update for iOS 9-9.0.2 solves the most common problems, but new ones appear. So, for example, those who had the joy of erasing the old version and updating the system to iOS 9 version on Apple's iPad 5 for the game encountered unstable devices after downloading it.
In another case, the developed iOS 9.3.4 jailbreak allows you to hack the iPad mini 5 software without using a computer. Although the developers are required to fill out the user's Apple ID before downloading.
It must be remembered that before working with jailbreak operating systems 9.3.3 or 9.2, you first need to back up all the files on your iPad 5 through the iCloud program or using the program iTunes to prevent deletion of data. At the same time, a jailbreak can be performed for software of any kind of iPads, including the iPad mini 5.
How to jailbreak iOS 9.3.3 without a computer for the game
To jailbreak iOS 9 or iOS 10 for the first time on an iPad, launch the Safari software by opening the iPad air 2 settings. Download the required link to the PP app to complete the jailbreak process . A menu will open where select the "Install" command, starting the download process on the desktop of the PP application. Watching the process, wait until the "download" process enters the "installation" process stage, then turn on the "Airplane" mode on your tablet. When the installation process is completed, you can turn off the "Airplane" mode on the device.
The next step is to open the "Settings" menu and select the "General" section, and then activate the "Device Management" subsection. Then the qualifier with the choice of proposed certificates and click the "Trust" command. After that, returning to the home page, turn on the installed PP and confirm by clicking "OK" sending notifications in the "push" format.
Look for a tick in the PP below to remove it. And then press the lock screen button, waiting for the message about the successful completion of the iPad jailbreak procedure. Now unlock your iPad and press PP to start installing Cydia, which ends with a system reboot.
Open the Cydia program installed on the home screen to prepare and launch it. In this case, the iOS jailbreak format is used, so after the next reboot of the device, you will again have to set the “jailbreak” mode, for which you will need the PP application again, without which you cannot complete the entire process. So iPad without jailbreak won't be able to install games, so don't uninstall PP unnecessarily.
Is it possible and how to remove the jailbreak
In order to remove a jailbreak, such as games, open "Cydia" on the main screen. Next, in BigBoss, find the Cydia Impactor utility, and then install and run it. At the bottom of the screen menu, activate the “delete all data and ..” key, which means deletion, including jailbreak.
Then, to permanently erase the data, press the "Delete all" key. Subsequently, the iPad screen will display the jailbreak removal process in the status bar. Wait ten minutes for this process to complete. The iPad will then restart on its own.
To jailbreak an iPad, you need to connect your iOS tablet to a PC that has the latest version of iTunes installed. If it is not there or the version is not the latest, download it from the official website to your computer. Next, at the top of the main menu, find the "Find iPad" option, after which the program will ask you to disable the "Find iPad" option in order to start the device recovery process. You will go to the "Settings" menu, where you will open the "iCloud" section, which will have the "Find iPad" function. Your iPad will be updated to factory settings. If the iPad data is backed up, then while booting, restore the iPad settings by clicking the "Restore from Backup" button. ” or you need to select the “Restore from a copy” command in iTunes.
Unattached jailbreak of any version of the operating system for iPhone and iPad, from iOS 9.2 to iOS 9.3.3, we decided to cover in detail the process of hacking an "apple" device so that everyone can jailbreak their smartphone or tablet.
Since the release of the jailbreak for iOS 9.3.2 and iOS 9.3.3 took place only today, no one guarantees the stable operation of the iPhone and iPad. As is often the case, hackers allow in their exploits, which ultimately affects the performance of the iOS operating system. Of course, over time, all bugs and errors are fixed, but if you do not have an urgent need for a jailbreak device, then it is better to wait a little with its installation.
How to jailbreak iOS 9.2, iOS 9.2.1, iOS 9.3, iOS 9.3.1, iOS 9.3.2 and iOS 9.3.3:
Step 1: To begin with, it is worth backing up the data on the iPhone and iPad, since in case of any problems, all the information can be easily restored and the jailbreak installation process can be started all over again.
Step 2: From the Pangu hacking team or you need to download the latest version of the jailbreak exploit for Windows, then unzip the downloaded files to your desktop and install.
Step 3: After launching the PP25 application on Windows, you should connect your iPhone, iPad or iPod Touch running iOS 9 to your computer, and then open the tab that appears with information about the device. Here you need to press the Blue button with the letter "P".
Step 4: On the "apple" device, go to "Settings" - "General" - "Profiles and device management", then select the item with Chinese characters from the list and click on the blue "Trust" button in the menu that opens.
Step 5: On the iOS 9 desktop, a blue icon will appear with a “P” button, which you need to click on. Immediately after that, a message in Chinese will appear. Click on the button on the right (OK).
Step 6: A large button will appear in the application, surrounded by a circle. Click on it, after which the jailbreak installation process will automatically begin.
Step 7: A message should appear on the screen of the "apple" device, according to which PP Pangu is installing the Cydia store, wait a few minutes until it completes. As you might guess, you need to wait for the end of this process.
Step 8: If everything is done correctly, then the iPhone, iPad or iPod Touch will reboot, and after turning it on, a message will appear indicating that the jailbreak was successfully installed on the device.
After completing these eight steps, the coveted Cydia icon will appear on the desktop of the iOS 9 operating system, which indicates the successful installation of the jailbreak on the iPhone, iPad or iPod Touch. This completes the procedure for hacking the "apple" gadget.
Join us at
Pangu Team has officially released iOS 9.2 - iOS 9.3.3 jailbreak. The exploit is compatible with iPhone, iPad and iPod touch devices running iOS 9.2 - 9.3.3.A limited version of the iOS 9.3.3 jailbreak is currently available. First of all, we are talking about devices with support for 64-bit architecture. In other words, the exploit is not available for iPhone 4s, iPhone 5, iPhone 5c, iPad 2, iPad mini first generation and iPod touch 5G.
The utility can be used by owners of iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus and 4-inch iPhone SE. It also claims compatibility with the first and second generation iPad Air, iPad mini 2/3/4 and, of course, iPad Pro. Supports 64-bit iPod touch 6G.
Another limitation of iOS 9.3.3 / 9.3.2 jailbreak is that after each reboot, the jailbroken device loses access to Cydia. Hackers call the exploit "semi-tethered": the gadget must be put into a jailbreak state by running the Pangu application. In addition, the tool requires a Windows operating system, and a Mac version of the exploit is expected to be released at a later date.
At the moment, jailbreak iOS 9.3.3 Pangu is available with a Chinese interface, but the developers promise to localize the application into English.
Jailbreak iOS 9.3.3: Compatible ModelsJailbreak iOS 9.3.3: Incompatible models:
- iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro, iPad Air 2, iPad Air 1, iPad mini 4, iPad mini 3, iPad mini 2, iPod touch 6G.
Supported firmware:
- iPhone 4s, iPhone 5, iPhone 5c, iPad 4, iPad 3, iPad 2, iPad mini 1, iPod touch 5G.
Requirements:
- iOS 9.2, iOS 9.2.1
- iOS 9.3, iOS 9.3.1, iOS 9.3.2, iOS 9.3.3
How to jailbreak iOS 9.3.3 with Pangu:
- Backup of all mobile device data.
- iPhone, iPad or iPod touch with iOS 9.3.3-9.2.
- Latest version of iTunes.
- Utility from Pangu.
Step 1: Download the new version of Pangu from this link. You will also need an up-to-date version of iTunes ().
Step 2: Run PPhelper as administrator. The firewall may report an unknown application, allow the program to make changes.
Step 3: After starting the utility, press the green button.
Step 4: On the desktop of the computer, you will see a utility icon whose name begins with "PP".
Step 5: Run it as administrator.
Step 6 A: On your iPhone or iPad, open the Passcode / Touch ID & Passcode menu and check that you have turned off the passcode or Touch ID security.
Step 7: Go to iCloud –> Find My iPhone. Turn off Find My iPhone.
Step 8: Activate Airplane Mode on your iPhone or iPad.
Step 9: Connect your iOS device to your computer and wait for the program to detect your device.
Step 10: On the next page, press the green down arrow button.
Step 11: The arrow will turn into a circle, at this point you need to wait. Be patient.
Step 12: After a while, the utility will prompt you to enter your Apple ID. Enter your details and press the green button.
Step 13: Wait a few minutes until the PP icon appears on the home screen of the iOS device.
Step 14: On your iPhone or iPad, open the Settings app –> General –> Profiles & Management. device.
Step 15: Select a profile and click the Trust button. In the window that opens, click Trust again.
Step 16: Launch the Pangu/PP app from the home screen of the iOS device and click the OK button.
Step 17: Now click on the circle:
Step 18: Lock the device by single pressing the power button. After a few seconds, a push notification will appear on the lock screen.
Step 19: You will be warned that your device is full of memory. All right, this means the stage of installing Cydia. You can unlock the device and launch the Pangu/PP app again.
Step 20: Your gadget will automatically restart, after which you will see the Cydia icon on the home screen.
Step 21: Launch Cydia and wait for the file system to be prepared. Congratulations, you can now jailbreak iOS 9.3.3!
