Gamers regularly delete games from a personal computer after they have achieved all the results. In some cases, people do not know how this process is carried out. So, often users are interested in how to remove Hamachi completely.

Many gamers are interested in how to properly remove Hamachi

This need may also arise due to the fact that this toy takes up hard drive space that a person needs to store other data. Find out how uninstall any application you can on our portal.

Instructions for the complete removal of Hamachi

To eliminate this toy, you must first use the regular means of the system. The whole process is carried out as follows:

• The Control Panel window launches. Through it, you can also delete hiberfil, which is a file that uses hibernation mode.
• A transition is made to a subsection called "Programs and Features".
• A search is made for the liquidated program in the list that appears, and then it is highlighted.
• The "Delete" button is pressed.
• The same button in the confirmation window is activated.

These manipulations allow you to start the toy master. It is necessary to follow the prompts that allow you to uninstall. Next, the game folder is erased. It can be found in the Program Files directory. However, it can be not only in this place, but also somewhere else.

In the Program Files folder, find the folder with Hamachi

The location of this daddy should be looked for in the directory where Hamachi was installed. In addition, it is recommended to look for residual toy files. To do this, you need to go to a folder called Documents and Settings.

The final deletion of files is done in the Documents folder

It, of course, is located on drive C. Then you need to open the folder with the username. Then a transition is made to Application Data or Appdata, depending on the version of the OS. Here you need to erase everything related to the game. At the end of the whole process, the trash is emptied.

Cleaning the registry

This procedure is carried out to remove the "tails" of Hamachi. This operation is always carried out with extreme caution, since you need not to make a mistake and not eliminate unnecessary files. Otherwise, the system will be unstable or even stop functioning.

Then it will have to be reinstalled. Therefore, it is recommended to use special utilities for such an operation. One of them is CCleaner. It is available to users for free on the official website of the developer.

At the same time, this software is convenient and completely safe. It will 100% clean the system of any rubbish. The algorithm for working with this program is as follows:

• Download, install and run the software.
• The "Register" button is pressed. It is located on the left side of the software window on a gray background.
• Click on the "Search for problems" button.
• The "Fix" button is activated after the registry scan is completed.
• After all the manipulations, it remains to close the auxiliary software window.

Uninstalling Logmein Hamachi, like any other program, occurs using the standard Windows tool "Add or Remove Programs" or manually. In addition, you can use third-party utilities to install software within a PC. To do this, Hamachi will need to close and then follow the instructions below.

Method number 1

To completely remove Hamachi from your computer for the first time, use CCleaner in free mode. The program should be downloaded from the official site, and then installed and run. To do this, find Hamachi in the tab called "Service", and in it - "Uninstall programs".

Next, you will need the "Uninstall" button (not to be confused with the "Delete" button). By clicking on it, you will launch the installer window, which will be prompted to remove logmein Hamachi. When you boot your computer after the end of the process is usually not required.

Method number 2

If the removal of Hamachi automatically fails or is not very successful, including from network connections, you must resort to manual removal.

First, you should uninstall the software distribution using standard tools. Then you need to delete the folders in which the name Hamachi appears, as well as logmein, if there are no other programs from the developer on the computer with an address such as:

C:\Program Files (x86)\

C:\Users\Your_ User(admin)\AppData\Local

C:\ProgramData\

In this example, the directories correspond to Windows 10 64 bit. In your case, the entry may look slightly different.

Next, you need to remove Hamachi, that is, the network adapter from the Device Manager. Then the registry editor is launched with a keyboard shortcut (“Win + R”, which means “regedit”. All entries in which Hamachi appears are deleted. Special care must be taken here so as not to inadvertently delete unnecessary ones.

Before all Hamachi entries are removed from the registry, it will be necessary to rename only one folder related to the program installer, which further interferes with the installation of an updated version of Hamachi. Next, in the registry editor, you will need to open (regedit) the corresponding branch:

HKEY_ LOCAL_ MACHINE\ SOFTWARE\ classes\ installer\ Products\

You will be presented with several folders that have a long name with alphanumeric combinations. You will need to select the first folder, and use the keyboard arrows to move down. In this case, select ProductName.

In ProductName, find the folder labeled Logmein Hamachi. You will need to rename the folder and add any two letters, such as X, at the end of the name.

In the latter case, you will need to uninstall the Logmein Hamachi Tunneling Engine service. To do this, launch the Service Manager using the combination (“Win + R” - “services.msc”). Find the required service, double-click the left mouse button.

A window will appear in front of you, in which the properties of the service will be reflected. From there you should copy the system name of the service, and click on the "Stop" button.

After that, the command line is called (the combination "Win + R" or "cmd") and the sc delete Hamachi2Svc command is entered.

The name of the Hamachi2Svc service is copied to be pasted into the command line window. Why type it manually, and unnecessarily complicate your task?

After the service is removed, you will need to restart your computer.

Hamachi is one of the most popular virtual networking software. It differs from the rest of the provision of stability and applicability in different areas. However, the components of this software are quite tightly immersed in the operating system, occupying registry settings, creating separate services and virtual drivers. This leads to the fact that after the standard removal of software, many traces of Hamachi still remain on the computer. Because the user has to manually clean it all. In this article, we will talk about the complete cleansing of the OS from traces of Hamachi, having analyzed two visual methods.

Next, you will be introduced to the manual and automatic method of uninstalling Hamachi. We want to note right away that the second one is not always successful, because not every auxiliary software is able to cope with all traces of software. Therefore, we first recommend studying this method, checking it, and in case of ineffectiveness, proceed to self-cleaning of the “tails”.

Method 1: Software for uninstalling programs

Now on the Internet there is a fairly large number of various auxiliary software, among it is one that allows you to remove unnecessary software. This will work with Hamachi, but there is no guarantee that absolutely all traces will be cleared. Now we propose to quickly study the implementation of this procedure using the example of a well-known solution called CCleaner:

As mentioned above, there are quite a few analogues of CCleaner. You can choose the most suitable option from all the offers. We advise you to get acquainted with the most popular solutions for the implementation of the task in our other material by clicking on the link below.

Method 2: Remove Hamachi by yourself

Now let's move on to a more complicated, but the most effective method - to remove Hamachi from the operating system on your own. We have divided this procedure into stages to make it easier for you to study the presented guide. Let's start with the very first steps.

Step 1: Initial uninstallation

The first step can be skipped for those who have already used the first method, but Hamachi's tails remain on the PC. For such users, we immediately recommend moving on. If you have not yet removed the main components of the program in question, do it like this:

1. Open "Start" and go to section "Options".



2. Select a category here "Applications".



3. Find Hamachi in the list and click on this line.



4. Click on an item "Delete".



5. Follow the instructions in the window "Removing LogMeIn Hamachi".



6. Wait for the operation to complete and proceed to the next step.

Usually, uninstallation cleans the system only of the main components of Hamachi, that is, you will no longer be able to use the program. However, this leaves the driver, services, and other files associated with the tool on the computer. Their removal will be discussed further.

Step 2: Deleting Hamachi Folders and Files

After the successful completion of the first stage, all files remaining on the disk are found and cleaned. Search for them must be performed taking into account exactly where you installed the software. Usually it is added to the system partition, so go through these directories:

C:\Program Files (x86)\
C:\Users\USERNAME\AppData\Local
C:\ProgramData\

If you do not see some of these folders, first turn off their invisibility, since the last two directories are hidden by default.

Delete any references you find to Hamachi or LogMeIn. Do this only if there is no other software from this developer on the PC.

Step 3: Remove the virtual network driver

Since the application being removed belongs to virtual networks, accordingly, it installs its own network driver, which can sometimes interfere with the correct operation of the Internet. Getting rid of it happens in just a few clicks:

After the implementation of this instruction, access to the network should appear, if suddenly it was absent. However, this does not always happen immediately. Restart your computer for all changes to take effect.

Step 4: Remove registry settings

Hamachi, like almost any software, during its installation enters certain parameters into the Windows registry, which leads to the appearance of various dependencies and conflicts after the removal of the software itself. Therefore, you will need to study the contents of the registry in detail and remove everything related to this application from there.

1. Run the utility "Run" by pressing the key combination Win+R. In the input field write regedit and click on "OK".



2. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\ by pasting this address into the top line or manually opening each subfolder.



3. Here, using the arrows on the keyboard, navigate through the directories with symbolic names and inside them pay attention to the value of the parameter "ProductName".



4. Find the folder where the mentioned parameter will have a value "Log Me In Hamachi".



5. Rename this library (the one on the left side of the window) by slightly changing its name to whatever you like. This is necessary so that in the future there are no possible conflicts with the program installer.



6. Then expand the context menu "Edit" and select a tool "Find".



7. Set search parameter "Hamachi" and remove any matches found.

Of course, don't forget to restart your PC after deleting all settings to get your system up and running.

Step 5: Removing the service

The last step in completely removing Hamachi from your computer is to get rid of the service that may accidentally remain after a standard uninstall. Without the software itself, it performs absolutely no action, therefore it is simply not needed.

1. Open "Run" (Win+R), where enter services.msc and press the key Enter or button "OK".



2. Among all the services present, look for "LogMeIn Hamachi Tunneling Engine" and double click on it.



3. In chapter "General" copy the service name.



4. Run "Command line" on behalf of the administrator by any convenient method.



5. Write there sc delete Hamachi2Svc , where Hamachi2Svc- the name of the copied service, and click on Enter.



6. You should receive a notification that the operation was successful.

If you received a notice "Access denied", then you will need to log into the operating system under an administrator account and only then try again. You will find all the necessary information on this topic below.

Above, you have been familiarized with the procedure for completely uninstalling LogMeIn Hamachi from your computer. As you can see, it takes a lot of time and is not an easy task. However, after completing all the steps, you can be one hundred percent sure that all traces of Hamachi have been successfully cleared.

Instruction

First of all, click the "Start" button, then "Control Panel". Find the "Network Connections" tab and launch it. If you have display by category enabled, then the tab will be in the "Network and to the Internet" section. Find the one you want in the list of connections.

There are several restrictions when deleting network connections. If your network connection is part of the network, then before deleting, delete the network bridge itself (which you can then recreate if you need it). You should not delete virtual connections created by network programs (for example, virtual private network adapters created by OpenVPN or Hamachi) on your own - they are deleted by means of these programs. It also makes no sense to delete the connections of network cards and IEEE-1394 (Fire-Wire) adapters - they will still be recreated by the operating system at the next reboot. Some of the described connections simply cannot be deleted - the "delete" menu item is not available for them.

note

Be careful when deleting connections - although it does not threaten any system problems, you may lose settings that you will have to do again if you make a mistake and delete the connection you are using.

Removing a network adapter may be required if the adapter is physically missing or if the system automatically assigns the same IP address to a hidden ghost adapter. Solving the problem will require some changes in the Windows system registry.

You will need

• -devcon

Instruction

Click the "Start" button to bring up the main menu of the system and go to the "Run" item to enter the command line tool.

Enter the cmd.exe value in the "Open" field of the application window and press the Enter key to confirm your choice.

Enter the value set devmgr_show_nonpresent_devices=1 in the command line field and press the Enter softkey to confirm the execution of the command.

Enter the following value Start DEVMGMT.MSC in the command line field and confirm the execution of the selected command by pressing the Enter key.

Select Show Hidden Devices from the View menu of the command line application window.

Open the list of devices (tree) "Network adapters" by clicking on the field with the "+" icon on the left side of the computer monitor screen.

Select "Remove". An alternative way to remove a network adapter is to use the DevCon program, which has a command line interface and is used to enable, disable, restart, update, and remove individual devices or a group of devices. The program is available for download from the official Microsoft website.

Download the DevCon tool according to Microsoft's instructions.

Unzip the 32-bit or 64-bit DevCon binary to a local folder.

Return to the main Start menu and select Run to launch the command line utility.

Enter cmd in the Open field and press the Enter key to confirm your choice.

Enter CD:BinaryPath to navigate to the folder containing the devcon.exe file.

Run devcon findall =net or devcon listclass net to search for installed network adapters.

Remove the hidden network adapter using the command
devcon -r remove
‘@PCIVEN_10B7&DEV_9200&SUBSYS_00D81028&REV_784&19FD8D60&0&58F0’.

Related videos

note

Incorrect changes to the Windows registry may lead to the need for a complete reinstallation of the operating system.

Useful advice

The appearance of a hidden ghost adapter is usually due to the presence of two adapters with the same name in the system.

Sources:

• Support Microsoft Russia

The main problem of a home local network is that the Internet channel is distributed among all active devices. If you want to provide a higher access speed for a specific PC or laptop, then the network must be turned off.

Instruction

There are several options for disconnecting most computers from your home network. Many of them depend on how the network is created. If your home network is built using a network hub and one of the PCs acts as a server, then there are two options for disabling it. Just unplug the network cable connecting the computer to the hub. To do this, disconnect it either from the network device or from the PC card.

If access to both devices is very difficult, then use the software method to turn off the network. Open Network and Sharing Center (Windows 7). Select the "Change adapter settings" menu. Right-click on the icon of the local network that you want to disable. Select "Disable".

If for some reason you were unable to perform the shutdown procedure using the above method, open the properties of the "Computer" menu and go to the device manager. Find the required network adapter in the list of connected equipment. Right-click on it and select "Disable". Confirm device disconnection.

If your network is built using either a router, perform a software shutdown of computers using the network equipment settings. Log in to the router settings web interface. Locate the Status or Network Status menu. Find a list of active ports or connected devices.

Now click the "Disable" button next to the port or device that you want to disconnect from the network. Repeat this process to disable all unnecessary devices.

Use a mechanical disconnection of cables from the LAN ports of the router if you were unable to block the equipment using the settings menu of the network device.

Related videos

At present, it is difficult to imagine a computer without a connection through some kind of network. They can be divided according to the type of network to which the connection is made. There are several network connections: dial-up connection, LAN connection, virtual private network (VPN) connection, direct connections, incoming connections.

You will need

• An account with administrator rights.

Instruction

Disconnecting a computer from the network is a mandatory requirement before removing a network connection. Let's look at some ways to terminate the connection to the network.

Select the following items in sequence: Start, Settings, Control Panel, Network Connections. The Network Connections window displays all connections for this computer. Right-click the desired connection and click "Disable" in the context menu that opens. After a while, this connection will become inactive.

If the LAN connection icon is displayed in the notification area, select it with the right mouse button. In the menu that opens, click "Disable" (Disable). After a while, the current connection will become inactive.

The easiest and fastest way to disconnect your computer from the network is to disconnect the network cable from the connector on the network card. The message "Network cable not connected" will appear and the computer will be disconnected from the network.

After disconnecting the computer from the network, you can proceed to remove the network. Select the connection you just disconnected by double-clicking the right mouse button. This will open the connection's properties window. It displays the name of the network card through which the connection was established, the components used by this connection, a description of these components, and other information.

To remove the selected connection, in the connection properties window, click the Uninstall button. The selected LAN connection will be deleted.

note

A normal user can only delete network connections he has created. To delete a connection shared by multiple users, you must be a member of the Administrators or Network Configuration Operators group.

Sources:

• how to delete local network

When using several Internet providers, unnecessary Internet connections remain. If you are convinced that you will not need to use them in the future, you can remove them from your computer.

You will need

• - access to a computer.

Instruction

Make sure that none of the Internet connections you are deleting are currently in use. To do this, view the current Internet connection on the taskbar in the lower right corner of the window. Open the complete list of Internet connections on your computer through the corresponding control panel menu. Select among them those that you will not need in the future, click on the Delete button or the Shift + Delete key combination to delete without moving to the trash. Also remove the connection shortcuts created on the desktop for quick access.

If you're having trouble removing an Internet connection, check to see if it's currently being used by another computer user. Also, when sharing an Internet connection, double-click on it with the left mouse button and check the box for using the connection only for the current user of the system.

- special software that allows you to build your own secure networks via the Internet. Many gamers download the program to play Minecraft, Counter Strike, etc. Despite the simplicity of the settings, sometimes the application has a connection problem with the network adapter, which is fixed rather quickly, but requires some action on the part of the user. Let's see how it's done.

Now we will go into the network settings and make some adjustments to them. Let's check if the problem remains, if so, then update Hamachi to the latest version.

Network connection settings on the computer

1. Go to "Control Panel" - "Network and Internet" - "Network and Sharing Center".

2. In the left part of the window, select from the list "Change adapter settings".

3. Click the tab "Additionally" and go to "Extra options".

If you don't have a tab "Additionally", go to "Organize" - "View" and click on "Menu Bar".

4. We are interested "Adapters and Bindings". At the top of the window, we see a list of network connections, among them there is Hamachi. Move it to the top of the list using special arrows and press "OK".

5. Restart the program.

As a rule, at this stage, for most users, the problem disappears. Otherwise, move on to the next method.

Update problem

1. Hamachi has an automatic update mode. Very often, connection problems occur due to incorrect settings in this part of the program. In order to fix it, we find the tab in the main window "System" - "Settings".

2. In the window that opens, in its left part, we also go to "Options" - "Advanced settings".

3. And then in "Basic settings".

4. Here you need to check the box opposite "Auto Update". Restart your computer. Make sure the internet is connected and working. After launching, Hamachi should itself detect the presence of updates and install them.

5. If the checkbox is present, and the new version has not been downloaded, go to the tab in the main window "Help" - "Check for Updates". If updates are available, update manually.

If this does not help, then most likely the problem is in the program itself. In this case, it makes sense to remove it and download the latest version from the official site.

6. Please note that standard deletion via "Control Panel" not enough. Such an uninstallation leaves behind various "tails" that can interfere with the installation and use of a newly installed Hamachi. It is necessary to use third-party software to completely remove programs, such as Revo Uninstaller.

7. Open it and select our program, then click "Delete".

8. First, the standard uninstall wizard will start, after which the program will offer to scan for the remaining files in the system. The user needs to select a mode, in this case it is "Moderate", and press "Scan"

After that, Hamachi will be completely removed from the computer. Now you can start installing the current version.

Often, after the actions taken, the connection is made without problems, and the user no longer bothers. If "things are still there", you can write a letter to the support service or reinstall the operating system.