Advanced → Wipe dalvik cache
Wipe data/factory reset
Wipe cache partion
Mounts & storage → format /system
- It is desirable to flash from a laptop (or from a PC running via UPS) in order to avoid power outages during the firmware.
If you want to get root rights after you have asked new firmware, here is a video tutorial with detailed step by step instructions.
Warning: Use these instructions at your own risk. We will not be held responsible for anything that happens to you or your device that results from using the information in this guide.
What you need to have for firmware Samsung Galaxy Note 2 GT-N7100
1. Create a folder on the disk with numbers or English letters for desired files(example: C:7100)
2. Download everything you need for the firmware there using the links below (it is recommended to download the latest versions):
Step-by-step instructions for firmware Samsung Galaxy Note 2 N7100:
- If you have an antivirus - disable
Programs:
Install SAMSUNG USB Driver for Mobile Phones
Unzip Odin3_v3.09
4. Firmware
- Run Odin3 v3.09, it will be in the Odin3_v3.09 folder
- Click on the PDA field and find the firmware file that you unpacked into the C: 7100 folder
- Connect the smartphone to the PC with the original cable, the first ID:COM field will turn blue.
- We double-check everything and press "Start".
- Wait for the end of the firmware process for 7-10 minutes, after which the smartphone will reboot itself.
- Disconnect your phone from the computer while it reboots.
If you did it right, after the reboot you will have a boot animation and the device itself will boot from official firmware Android 4.x.
Install optional products - DriverDoc (Solvusoft) | | | |
This page contains installation information. latest downloads drivers samsung galaxy Note 2 using the Samsung Driver Update Tool.
Samsung Drivers Galaxy Note 2 represent small programs that allow the equipment Mobile phone interact with software operating system. Maintaining updated Samsung Galaxy Note 2 software prevents crashes and maximizes hardware and system performance. Using outdated or corrupt Samsung Galaxy Note 2 drivers may cause system errors, malfunctions and failure of equipment or computer. Moreover, installing the wrong Samsung drivers can make these problems worse.
Advice: if you don't know how to update drivers Samsung devices manually, we recommend downloading the Samsung Galaxy Note 2 Driver Utility. This tool will download and update the correct Samsung Galaxy Note 2 driver versions automatically, protecting you against installing the wrong Galaxy Note 2 drivers.
About the author: Jay Geeter ( jay-geater) is President and CEO of Solvusoft Corporation, a global software company focused on innovative utility programs. He has been passionate about computers all his life and loves everything related to computers, software and new technologies.
Advanced → Wipe dalvik cache
Wipe data/factory reset
Wipe cache partion
Mounts & storage → format /system
- It is desirable to flash from a laptop (or from a PC running via UPS) in order to avoid power outages during the firmware.
If you want to root after flashing a new firmware, here is a video tutorial with detailed step by step instructions.
Warning: Use these instructions at your own risk. We will not be held responsible for anything that happens to you or your device that results from using the information in this guide.
What you need to have for firmware Samsung Galaxy Note 2 GT-N7100
1. Create a folder on the disk with numbers or English letters for the necessary files (example: C: 7100)
2. Download everything you need for the firmware there using the links below (it is recommended to download the latest versions):
Step-by-step instructions for firmware Samsung Galaxy Note 2 N7100:
- If you have an antivirus - disable
Programs:
Install SAMSUNG USB Driver for Mobile Phones
Unzip Odin3_v3.09
4. Firmware
- Run Odin3 v3.09, it will be in the Odin3_v3.09 folder
- Click on the PDA field and find the firmware file that you unpacked into the C: 7100 folder
- Connect the smartphone to the PC with the original cable, the first ID:COM field will turn blue.
- We double-check everything and press "Start".
- Wait for the end of the firmware process for 7-10 minutes, after which the smartphone will reboot itself.
- Disconnect your phone from the computer while it reboots.
If you did it right, after the reboot you will have a boot animation and the device itself will boot with the official Android 4.x firmware.