By default, the vertical view of the pages, which is also called the book view, is set. For most text documents, instructions and even books it is the most suitable.
However, there are situations when a horizontal sheet is more convenient. For example, when inserting large graphs, photographs, and other wide visual objects. In this case, you need the pages to be "flipped".
By the way, what kind of sheets in the document - book or landscape - is called page orientation.
How to make all pages of a document landscape
1 . At the top of the program, go to the "Page Layout" or "Layout" tab and find the "Orientation" button.
2. Click on it and select the "Landscape" option.
Now all sheets in the document will be horizontal. If you need to make them vertical again, we do the same, but instead of landscape orientation, we select portrait.
How to make landscape only one (several) pages
It often happens that you do not need to turn all the pages, but only one. Well, or a few. For example, in term paper, where the main part of the document is text, but several sheets are dedicated to images and graphics. Then it is much more convenient if they are horizontal.
1 . We put the cursor on the page that you want to make landscape. To do this, simply click on it to make the wand blink.
2. Go to the "Page Layout" tab at the top of the program and click on the small arrow in the "Page Setup" line (on the right).
IN Word versions In 2016, this is done a little differently: go to the "Layout" tab, select the "Fields" element and look for the line "Custom fields" at the bottom. In earlier versions of Word: File → Page Setup.
3 . In the window that appears (in the "Fields" tab), in the "Orientation" section, click on "Landscape".
4 . Then, at the bottom of the window in the "Apply" section, select "until the end of the document" from the list and click "OK".
Now this page and everything after it will be in landscape orientation. If you need to have only one turned sheet or a couple in the document, then do the same, but in reverse:
- Put a blinking cursor on the sheet that should be book (just click on it).
- In the Page Layout tab, click on the small arrow next to Page Setup.
- In the window, specify the orientation "Portrait" and at the bottom select "to the end of the document."
The page will “flip” back, while the previously made landscape sheet(s) will remain. Now all subsequent pages will be book.
Page orientation in an MS Word document can be portrait or landscape. Most often, when formatting text, portrait orientation is used for pages. But it also happens that a drawing, graph or inscription in large print does not fit on the page in width. In this case, you can make one or more landscape pages in Word. This is what I will talk about in this article.
How to make landscape orientation of all pages in Word
This is the simplest question. Open the desired document, then click the tab "Page layout". In chapter "Page settings" click on the "Orientation" button and select the appropriate item from the menu. After that, all pages of the document will become landscape orientation.
How to make landscape orientation for several pages in Word
Now let's imagine that you have several pages in a Word document for which you need to do landscape orientation. All other pages must remain portrait orientation.
To do this, select all the text on desired pages, go to the tab "Page layout" and in the section "Page settings" click on the small arrow in the lower right corner.
A dialog box will open. In it, in the "Orientation" section, put "Landscape". Then in the "Apply" field, select "to selected text" and click OK.
Selected pages became landscape orientation, and all the rest remained portrait.
You can make several landscape pages in MS Word in another way. To do this, put italics at the beginning of the text, on the page from which the landscape ones begin, go to the tab "Page layout", click on the "Breaks" button and select from the drop-down list "Next page".
Now put italics at the beginning of the page from which the sheets with portrait orientation begin again, and repeat all the steps. When non-printable characters are enabled, the inscription will be displayed "Section break (from next page)".
Put italics on one of the pages that will be landscape, go to the tab "Page layout" and in the section "Page settings" click on the arrow. In the next window, select landscape orientation, and in the "Apply" field, select "go to current section". Click OK.
All pages that were in the current section have become landscape orientation.
How to make one landscape sheet in Word
If you need to make one landscape page in Word, you can use the methods described in the previous paragraph. Just apply them to one page.
Now you can easily make book or landscape pages in your document. Moreover, you can change the orientation for both several and for one page.
Rate article:It is well known that in the Word there can be both book and album sheets. That is, there is a portrait or landscape orientation of the pages of the document. Portrait orientation is usually A4 size. But what if this size is not enough. This can happen if you need to insert a long table, a long graph or an image, big size. In this case, knowing that is useful, since the landscape sheet is much wider than the usual format. In order to select or change the orientation of the sheet on the toolbar, go to the "page layout" tab. Next, right there in the page settings section, we find “orientation”. Choose between portrait or landscape. Everything, the sheets of the entire document will take the desired orientation.
Choose landscape orientation
But sometimes the question arises, how to make only one landscape sheet? Or maybe you need to make part of the landscape sheets, and part of the book. How to be?
Lesson - how to make only one landscape sheet.
First, put the cursor at the beginning of the page that will be landscape, click it. Then we follow the same path: tab "page layout", "orientation". But now let's pay attention in this same "page settings" section to the small button at the bottom right. By moving the cursor over it, we will see the "page settings" dialog box, go into it. There are three tabs here, we need the first "field", we remain in it. We select landscape orientation and this will be reflected on the sample, then select "apply to the end of the document." If you set "apply to the entire document", then again, all sheets will become landscape. If you need only one landscape sheet, you must select "to the end of the document."
How to make landscape orientation - button at the bottom "page settings"
We see that starting from this sheet, all sheets have become landscape. Next, leave this sheet in landscape orientation. The next sheet, from which the portrait orientation should again go, we click the cursor at the beginning of the sheet. Again we go along the same path, only now we change the landscape orientation to portrait. We are left with one landscape sheet in the middle of the document.
Here in the "page settings" you can select the fields for the landscape page.
Basically, that's all there is to it how to make a landscape sheet in word.
Landscape and portrait page orientation in MS Word
Default, text editor MS Word offers pages in the so-called. "portrait" orientation, that is, the height of the page is much higher than the width. However, sometimes, for example, when printing large tables on a sheet, it is much more convenient to use the "landscape" orientation.
To change the page orientation, go to page layout tab, And in the Page Setup group, use Orientation tool. As you can see, it is impossible to make a mistake - we have only 2 options. One click on the option you like, and voila, all the pages of our document will immediately “turn over” and automatically adjust to the selected position template.
It is very simple to do this and almost any Word user will cope with the task without any preparation. Much more non-trivial, the following task looks like:
How to change single page orientation in Word?
As you noticed, when you change the page orientation, the entire document “flips” at once. It looks, to put it mildly, strange - most likely you have only one “big table”, so your plans do not include submitting an annual report or a diploma in the form of an album because of it. That is change the orientation to landscape, you only need one or two pages, and everything else, let it go in the long-familiar "book" form. Simply put, we need one word document place pages with different orientation.
How to be? Some craftsmen do not philosophize slyly, and simply create "book" and "album" pages of one document in different files, and then, already during printing, "reduce" all this into a single document. Of course, this partly solves the problem, but it creates a new one - what about pagination, with “torn” text blocks and uneven layout?
In fact, of course, there is nothing complicated here, and now you will see this with an example.
I have created 6 blank pages in Word and I am going to change the orientation of one of them to landscape
Let's say my document has 6 pages. 5 of them are standard "portrait", but one page, for example the 3rd in a row, I want to make landscape orientation.
First of all, I put the cursor on the page going BEFORE the desired one (i.e. on the 2nd one), and go to the already familiar tab "Page layout", in the Page Setup group. Pay attention - in the lower right corner of the group there is a lurking icon "page settings". We click on it and display the window of the same name on the screen.
The first tab of this window is called "Fields". Look a little lower and you will see the page display formats already familiar to us: “portrait” (active now) and “landscape”. We select the option we need and ... we are in no hurry to click on the “OK” button, but look even lower.
See the inscription: "Apply ... To the whole document"? Feel free to change this line to "Apply ... Until the end of the document“, and now we press the coveted “OK”.
Okay, our document now contains pages of different orientations ... But there is room to move on!
Let's see what happened. Miracles in the sieve! The first two pages remained "book", but all the rest became landscape. Don't worry - we are on the right track. Left just a little bit.
The final touch - we turn the "unnecessary" pages in the opposite direction
We put the cursor, now on our “landscape” page (we have it at number three, if you haven’t forgotten), and again open “Page Options”, and change everything back: instead of “landscape” orientation, we put “portrait”, and the item “ Apply…” leave it in the same position as before: “Until the end of the document”. Again we press "OK" and we see a completely different picture.
problem solved - we managed to make the pages of our document have different orientations - both portrait and landscape
As you can see, the task has been fully completed: we managed to change the orientation of one page in MS Word... Although this task is not one of those whose solution lies on the surface.
Also you may be interested in:
Page orientation in an MS Word document can be portrait or landscape. Most often, when formatting text, portrait orientation is used for pages. But it also happens that a drawing, graph or inscription in large print does not fit on the page in width. In this case, you can make one or more landscape pages in Word. This is what I will talk about in this article.
How to make landscape orientation of all pages in Word
This is the simplest question. Open the desired document, then click the tab "Page layout". In chapter "Page settings" click on the "Orientation" button and select the appropriate item from the menu. After that, all pages of the document will become landscape orientation.
How to make landscape orientation for several pages in Word
Now let's imagine that you have several pages in a Word document for which you need to make landscape orientation. All other pages must remain portrait orientation.
To do this, select all the text on the desired pages, go to the tab "Page layout" and in the section "Page settings" click on the small arrow in the lower right corner.
A dialog box will open. In it, in the "Orientation" section, put "Landscape". Then in the "Apply" field, select "to selected text" and click OK.
Selected pages became landscape orientation, and all the rest remained portrait.
You can make several landscape pages in MS Word in another way. To do this, put italics at the beginning of the text, on the page from which the landscape ones begin, go to the tab "Page layout", click on the "Breaks" button and select from the drop-down list "Next page".
Now put italics at the beginning of the page from which the sheets with portrait orientation begin again, and repeat all the steps. When non-printable characters are enabled, the inscription will be displayed "Section break (from next page)".
Put italics on one of the pages that will be landscape, go to the tab "Page layout" and in the section "Page settings" click on the arrow. In the next window, select landscape orientation, and in the "Apply" field, select "go to current section". Click OK.
All pages that were in the current section have become landscape orientation.
How to make one landscape sheet in Word
If you need to make one landscape page in Word, then you can use the methods described in the previous paragraph. Just apply them to one page.
Now you can easily make book or landscape pages in your document. Moreover, you can change the orientation for both several and for one page.
Rate article: