Most Android users are interested in flashing tablets for many reasons: you need to update the system or have a desire, or to return the device to working condition.

Many are not satisfied standard firmware on Texet TM7866

Be that as it may, the process itself is quite simple, but differs depending on the manufacturer. We will look at how the Texet TM7866 and other brand models are flashed, and how to do everything right so as not to harm the device.

What do you need to flash a Texet tablet?

First of all, let's find out what is needed to perform such an operation. Texet TM firmware is done using the following tools:

  • A charged battery - it is best that it is full, or has a reserve of at least 50%;
  • Computer - with its help flashing will occur;
  • The PhoenixSuit program, through which the software is replaced - download and install it on your computer;
  • Directly - the file with it must also be pre-downloaded and saved on a PC;
  • Where can I get the firmware and the program to install it? It is best to look for them on the official website of the Texet manufacturer, navigate by the series marked with the letters TM. Software replacement files are located in the "Support" section, then select "Downloads";
  • In the window that opens, you can find the files with the program and the new Android image, but carefully check the serial number of your device in order to download the appropriate archive with the software.

So, when you have downloaded everything, install PhoenixSuit in this way:

  • Open the installer, click "Next";
  • Windows will notify you to install the driver, but it is unverified - confirm download anyway;
  • After confirming the remaining items, it will happen, at the end click "Finish" and close the window.

You have now installed a standalone PhoenixSuit program designed to replace firmware on Texet TM products.

How to flash a Texet tablet?

Flashing the Texet TM7024 tablet and other models is performed using the following steps:

  1. Again, make sure that the gadget is sufficiently charged and open PhoenixSuit;
  2. Click on the Firmware section;
  3. In the window that opens, specify the path to the file with the system image in the Image line;
  4. If the tablet was turned on, turn it off and press the "Home" key;
  5. via USB by pressing the aforementioned key until a message appears with the text "Tips: Does mandatory format?";
  6. Answer the question in the affirmative, after which the replacement will begin software- you can watch the process directly in the application;
  7. After the process is finished, the message “Upgrade Firmware Succeed” will appear - just click OK.

You can now unpair the device and turn it on. By the way, the download will seem a bit slow. This happens only at first, because the device is launched for the first time with new software.


in front of you detailed step-by-step instruction about how to flash a teXet TM-7026 tablet. Our editors have chosen the most suitable method for flashing this teXet model. If a this instruction will not give a result try flashing with another method: TWRP Recovery, ROM Manager , Fastboot or Classic OTA .

Warning! After flashing the device, all your data from internal memory- will be erased, so to save your contacts, settings and applications, first save all the data from the tablet.

Installing the system using CWM Recovery 1. Charge your flash tablet at least 80%. 2. We save from a flash drive, sim card and tablet memory all the data that cannot be lost. Simka (if any) can be pulled out. 3. We place required firmware to the tablet's memory. The firmware file must be in archive format zip. You can select and download the firmware. 4. All teXet tablets have Recovery from the manufacturer, so we change it to ClockWorkMod Recovery. We do it according to the following instructions: Install the app from Google Play on your tablet. Play it and provide Root rights. . Select "CWM Recovery" from the list of options. The application will then show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for tapping the screen and the classic version (controlled by the volume and power buttons). You will be prompted to download. Click Yes. Then the download of the CWM Recovery image for the tablet will begin. A notification will appear that the firmware was successful and you now have a modified recovery installed. We immediately go into it, for this, click "Yes". Ready. If you already had ClockworkMod Recovery installed, then simply enter it by holding any of the combinations for 3-5 seconds: - Volume up + power button - Volume down + power button - Volume up / down + power button + "Home" - Volume up + volume down + power button 5. Movement in the Recovery menu is carried out using the volume buttons, and confirmation of the selection with the power button. Before installing the firmware, you must first reset the settings. So choose from the menu wipe data/factory reset.
6. Next, simply confirm that you agree to reset: Yes - Wipe all user data.
7. Now in the main menu of the Recovery, select install zip.
8. After that select Choose zip from /sdcard.
9. Navigate to the folder where you saved the firmware zip file and select it.
10. You will be prompted to confirm the action. Select Yes - Install....
11. The firmware installation process will begin and the inscription will appear at the end Install from sdcard complete. The firmware is finished. We return to the main menu of CWM Recovery and reboot the tablet. For this we choose reboot system now.
12. Ready. The tablet will start downloading from the already installed firmware. Other materials

Hello dear readers. Today we will talk about the Russian budget tablet texet tm 7016 - made in China. We will not dwell on it for a long time and immediately move on to the technical parameters.

Tablet Specifications

This is a seven-inch tablet with a resolution of 800x600 pixels, powered by operating system Android version 4.0.3. The processing and distribution of resources is handled by the Boxchip A13 microprocessor with an operating frequency of 1200 MHz, paired with 512 MB of RAM, only 4 GB of internal memory, but thank God there is a slot for external card memory.

Appearance

There is only one rear camera of 0.3 MP. Optional built-in speaker, microphone, orientation sensor and accelerometer, what can I say - this is a budget option.

To access the Internet, the manufacturer provided a Wi-Fi module and support for host mode, that is, connecting external devices, for example:

  • Modems;
  • Mice and Keyboards;
  • Flash drives.

The mass of the budget device is about 300 grams, dimensions are 193x121x9 millimeters.

The bundle for a budget tablet is quite complete:

  • USB cable for PC;
  • Host cable;
  • headset;
  • Tablet;
  • Manual, warranty card;
  • Charger.

Unpacking the tablet: https://youtu.be/l-FLbBaEg9Q

Appearance of the gadget

The reverse side of the device has a characteristic insert, which is very reminiscent of the well-known Ipad. For those who have never worked on a tablet PC, the engineers have applied graphic symbols for all available connectors and keys.

Backside

On the right side you will find a headphone jack, a connector for connecting charger, a USB connector and a slot for an external memory card, as well as HDMI input to connect to any devices with the same connector.

Right side face

As you can see, they have bolts on the sides, so be sure that it is disassembled if something is burned out or needs to be changed.

Upper side edge

Traditionally, on the upper edge are the on / off key of the tablet computer, the volume key and the mechanical back button.

In addition, the reverse side was made of metal - most likely aluminum.

External modem connections

As mentioned above, the tablet PC runs on Android 4, so the setup and operation of the product will not take much time and will be intuitive.

Desktop

Standard desktop of an Android device

Application menu

Menu showing all installed applications. We find the settings and click.

Setting up an external modem

As mentioned above, the tablet does not have a built-in 3G module, one has the ability to work with external devices. To do this, we purchase a modem, buy starter pack with the Internet (modern already built-in).

It is important to know that before buying, check the modem for compatibility with the device.

We connect and go to settings / More / Mobile network / at this point we turn on data transfer - this is very important, without this it will not work. Next Access point / Functions / Create a new connection point.

Mobile networks

You will have a whole list of fields in front of you that you will need to fill in in accordance with your mobile operator - do not be scared right away, as you will only have to fill in four fields, such as:

  • Connection name;
  • Access point;
  • Username;
  • Password.

The name of the connection point can be anything, but the rest must be as written.

APN

  • For MTS: internet.mts.ru
  • BeeLine - home.beeline.ru
  • For Megafon - internet
  • tele2: internet.tele2.ru

Username

  • for MTS: mts
  • beeline-beeline
  • Megaphone: empty
  • tele2 - empty

Password:

  • for MTS - mts
  • for BeeLine: beeline
  • Megaphone - empty
  • for tele2 - not needed

We check again for correctness, save and reboot the device. Turn on data transfer again and use it.

To connect via Wi-Fi, you only need to turn on the module and wait until the area is scanned and connected to the selected point.

WiFi connection

Device firmware

Before installation new firmware it should be soberly understood that everything that will be done in this paragraph is done at your own peril and risk, the site administration and the author do not bear any responsibility for all the consequences. Therefore, we recommend that without the necessary importance and without any knowledge do not try to flash Tablet PC Better a working gadget than a broken and invalid warranty card.

First, download the LiveSuit firmware program: http://4pda.ru/pages/go/?u=http%3A%2F%2Ftexet.ru%2Ffiles%2FLiveSuitPack105_english_1352960642.exe

Download the necessary drivers for the tablet itself:

http://narod.ru/disk/64815553001.02962bc6c616a8c0bb9ac1c49bdc2d38/UsbDrivers.rar.html

After installing the program on a PC, a folder will be automatically created - UsbDriver, it is in this folder that we place the above drivers. Now you need to download the firmware itself for this, go to the manufacturer's website:

http://www.texet.ru/support/files/ or download it from unofficial sites, such as w3bsit3-dns.com.

Instruction:

  • We launch the program for the PC;
  • Turn off the tablet PC and hold down the Volume + button;
  • We connect the device to the PC without pressing the volume key;
  • Immediately press the power key 3 times, while not releasing the finger from the volume;
  • Now the computer will prompt you to install the appropriate driver - select manual installation and go to the previously created folder with the driver;
  • After successful completion, turn off the device;
  • Now again we do 2-3 points and select the firmware in the program (graphic cube);

Firmware program

  • In the window that appears, click "Yes";

Firmware installation

  • Click yes again and wait for the software update process to complete;

Installation completed successfully

On this, the installation was successfully completed, disconnect the tablet PC and turn it on - the process will take a little longer to load, this is normal.

Obtaining root-rights is not required, since the device is already rooted upon purchase.

Some problems and questions on operation:

  • What is the difference between TexetTM 7016 and 7026

The first of them is intended for the Ukrainian consumer, the second for the Russian

  • Tablet gets very hot

This is normal, it works - but you shouldn’t load it heavily (several dozen processes at once), it was made in China, which means that the material and equipment are not of very high quality.

  • External modem not working

Checking its performance on another device, checking if the cord is damaged, and also checking its compatibility with the tablet is very important.

  • Firmware not installed

Try holding down the power key and the Reset button (in the depth of the microphone) when connecting to a PC until the computer detects the device.

Full review: