Often, after buying a new manipulator, the question arises of how to connect a wireless mouse to a laptop without problems for a novice user. As practice shows, there is nothing complicated about this, everyone can handle it. This article will provide step by step guide, which will allow you to solve this problem without problems.
Advantages and disadvantages
Wireless manipulators have whole line advantages: easy to use (no need to pull the wires and worry about the fact that their length is not enough), work on almost any surface (the exception is glass, on which the optical sensor does not function), simple and easy to set up and operate (most often the operating system itself finds the drivers and installs them, the user does not take any part in this). Therefore, when buying a new mouse, more and more users are turning their attention to such devices. They have one minus - the batteries are periodically discharged, they need to be changed for new ones. This is the most common reason why a laptop does not see a wireless mouse.
How to choose?
Before buying a laptop, you need to choose and buy it correctly. Before going to the store, you need to decide on a list of potential tasks. If you plan to watch movies, listen to music or visit websites, then a regular 3-button mouse with one scroll wheel will suffice. But gamers should turn their attention to more expensive devices that have more buttons and 2 scroll wheels.
In the process of choosing in the store, we evaluate ergonomics. The manipulator should fit comfortably in the hand. Next, we turn our attention to the manufacturer. The best in terms of "price-quality" are devices of the brands "A4Tech", "Sven", "Genius" and "Logitech". It is on them that it is recommended to pay attention. But if the budget is not limited, then you can choose Mad Catz. Mice of this brand cost about 160 USD, but at the same time they are distinguished by an exclusive design and maximum user friendliness in gaming applications.
Batteries
Connection wireless mouse to the laptop, we start by installing the batteries. Any manipulator of this class is powered by two standard finger batteries. Usually they are included, but there are exceptions. In this case, you need to check with the seller at the stage of purchase. If they are not, then you need to additionally purchase two such batteries. Then we find on the mouse the cover from the battery compartment and open it. The battery polarity is marked on the bottom. Fulfilling this condition, install them, and then close this compartment.
Installing the receiver
The second step in answering the question of how to connect a wireless mouse to a laptop is to install the transmitter. It is equipped with a rectangular USB connector, with its help information is transferred from the manipulator to the computer. After opening the package, we find it. In some mice, it can be hidden in the battery compartment (it's a miniature device that can easily fit there). Next, find any rectangular USB socket on the laptop and install it.
Drivers
After installing the receiver, installing the necessary software in most cases it happens automatically. At the same time, a message appears in the lower right corner of the screen stating that a new device has been found, it is being configured. Next, you will see a notification: "The new device is installed and ready to go." This indicates that the software debugging has been completed. Now the manipulator should work. That is, when it moves along the surface, the pointer on the screen will have to move. If this does not happen and the laptop does not see the wireless mouse, you need to check the batteries.
In some cases, to activate the manipulator, you must press the button labeled "On / Off". In this case, the optical sensor must necessarily light up. If the mouse is non-standard (for example, gaming), then install additional drivers. They can be taken either on the CD that comes with the manipulator, or downloaded from the official website of the manufacturer. In the first case, we use the drive. In the second, you need an Internet connection, where using search engines find necessary information and download it. Then you need to install the drivers by following the instructions of the installation wizard. Finally, be sure to restart your computer.
Results
As part of this article, it was described step by step how to connect a wireless mouse to a laptop. The first step is to install the batteries. Next, connect the transmitter. If necessary, install additional drivers. In the end, it is recommended to reboot everything. As you can see, there is nothing complicated. So let's go and do it. Good luck!
The laptop has a built-in mouse - a touchpad (touchpad), which usually does not need additional setting. However, some tasks using the touchpad are inconvenient to perform: for example, working in graphics editor. In that case, instead of touch panel you can use a wired or wireless mouse that connects via bluetooth. The topic of our article is how to properly connect this useful device.
Rules for connecting a wireless mouse to a laptop
Sequencing
- The wireless mouse must be powered by AA (little) batteries.
- The mouse comes with an RF or infrared receiver with a USB connector, plug it into one of the laptop's ports. If there is no free entrance, it is best to purchase an adapter with two or three entrances. There are mice on sale with a Bluetooth receiver, but before purchasing, you need to make sure that Bluetooth is on your laptop.
- To activate the device, you need to find and press a small button on the back of the mouse. As soon as the indicator lights up, the signal is determined and the laptop detects the mouse.
- It should be remembered that the mouse does not perceive glossy surfaces: the table on which you move the mouse must be matte.
If nothing happened after performing all the above operations, and the mouse does not function for some reason, first restart the computer. After trying again and making sure that nothing happens, try switching the mouse to a different port and repeat the steps with a ten second pause after switching. You can also check the contact with the batteries and their expiration date if you did not do this at the time of purchase.
If you are still unable to connect, you should check if a special driver needs to be installed or if the mouse is working? If it's not a mouse budget option may need to contact service center.
Be sure to purchase and always have spare batteries on hand. And keep in mind that a laser wireless mouse has a number of advantages over an optical one.
programmer
Free software for your computer helpful tips by Windows
tips → how to do it → how to set up a mouse
How to set up the mouse
Usually the mouse is ready to use immediately after the computer boots up, however, you can always make some changes to its operation, as well as change appearance and pointer behavior. For example, you can change the assignment of computer mouse buttons (using the right mouse button as the main button) or the double-click speed. You can change the appearance of the mouse pointer, make it more visible, or turn on hide when typing.
To change mouse settings, you must:
Enter the "Start" menu → "Control Panel" → click on the "Mouse" icon (in the classic menu view) or select the category "Printers and other hardware" (if the menu is displayed by category) and then click "Mouse" → the window " Mouse properties.
The Mouse Properties window has several tabs:
- Mouse Buttons tab -
. in the “Button configuration” column, if necessary (if you are left-handed), you can configure the mouse to control your left hand to make the main right button. To do this, turn on the "Change button assignments" item. If you want the primary button to be the left mouse button, uncheck this box.
. in the column "Speed of execution double click» with the regulator you need to set the speed of clicking on the working mouse button. It is recommended to use the lowest.
. in the "Sticking" column, you can set the ability to drag and drop folders and files without holding down the working mouse button. To enable this action, hold down the working mouse button, and to disable it, click again. - pointers tab -
. in the "Scheme" column, you can select the styles for displaying the cursor. - Pointer Options tab -
. in the “Movement” column, use the slider to set the speed at which the cursor moves across the screen. It is recommended to select the maximum speed. It is also recommended to enable the "Enable increased pointer precision" option.
. In the column "Initial position in the dialog box" to automatically place the cursor on the active button (for example, "OK" or "Apply"), you must enable the item "On the button selected by default".
.In the "Visibility" column, to display the pointer loop on the screen (if you have poor eyesight), you can turn on the item "Display mouse pointer trail".
In this case, it is recommended to enable the item "Hide the pointer while typing from the keyboard"; You can enable the item "Indicate the position of the pointer when pressing CTRL" if you need to quickly find the cursor on the screen; - "Wheel" tab in the "Scroll" column (if your mouse has a wheel) -
here you need to set the ratio of the mouse wheel rotation and the number of lines on the document sheet. The default value is "3".
Everything. Your mouse is set. Close the window with the OK button.
One can only add that if your mouse makes unthinkable jumps across the screen, then it just needs to be cleaned.
Mouse buttons:
Primary mouse button used to select and click objects, to position the cursor in the document, and when dragging objects. Usually the main mouse button is left button . On trackballs, the main button is usually the bottom button.
Auxiliary mouse button used to open a menu of tasks or options that changes depending on the context. This menu is useful for quickly completing tasks. Pressing the auxiliary mouse button is called right click.
Technologies are improving every day and acquiring a new character and capabilities. The world has long been familiar with wireless communications and data transmission, embodied in the form various systems(WI-FI, Bluetooth and so on). These types of communication have become widespread in various fields of activity, and they have not bypassed the input devices for the PC. Today we will learn how to connect a wireless mouse to a computer.
Convenient Advantage
The mouse is one of the essential devices for working with a PC. The main requirements for it are the accuracy and speed of operation, user-friendly design and ease of use. Very rarely there are such models that would contain all these properties. But he who seeks will always find. These convenient and efficient devices rightfully include wireless mice, which have a very convenient control system, completely devoid of any wires. And there is nothing to say about speed and speed here: the operating frequency reaches 2.4 GHz. Before you figure out how to connect a wireless mouse, you need to familiarize yourself with some important points.
It's important to know!
Naturally, such a device is not equipped solar panels. It receives power from AAA batteries, which need to be periodically changed and charged. To this end, a pair of such energy sources is included in its kit. The best wireless mouse should have a long service life and function, allowing the device to work without recharging for several days in a row. In addition, when buying, you need to know about what type of connection the mouse is in contact with the PC: Bluetooth or WI-Fi. There are times when the device slows down. The wireless mouse is paired with the computer using a radio signal that can very rarely pick up interference. In general, almost every such model is equipped with a special system for "jumping" to another frequency, so this problem rarely occurs. Therefore, if it happens, it will pass very soon.
Connection
So we got to the most important and interesting: how to connect a wireless mouse. Any model of this kind interfaces with a PC using a USB transceiver (most often, less often - with using WI-FI), which is a Bluetooth module plugged into the USB input. So, first of all, you need to insert two batteries into the mouse. Finding the battery cover is not difficult. After that, you need to plug the Bluetooth module into the USB input, start a similar system on the mouse by pressing the start button. In most cases, this is enough for the device to work stably. But there are also situations when drivers are required for correct operation, which must be attached and included in the general package of the mouse. All you need to do in such a situation is to insert boot disk and click the "install" button. Then the system will do everything automatically. After this instruction, the reader should have no problem in how to connect a wireless mouse. Such a device will serve you faithfully for several years. The main thing is to periodically change the batteries.
Most novice users ask themselves questions: how to adjust the speed of mouse clicks and cursor movements, change mouse pointers, adjust the wheel, and others are not enough important parameters. We will now find out the answers to all these questions.
So, in order to configure mouse in windows 7you need to do the following:
Step 1 . Click the Start menu and select Control Panel. In the control panel window that opens, click on the linkEquipment and sound.
Step 2 . In the opened windowEquipment and sound in line Devices and printers select Mouse .
Step 3 . Next, the window necessary for the mouse settings will open. In this window, all mouse settings in the operating room will be made. windows system 7.
Properties Window: Mouse consists of five tabs:
- Mouse buttons.
- Pointers.
- Pointer options.
- Wheel.
- Equipment.
On the Mouse Buttons tab you can customizeButton configuration. Namely swap button assignments. This option will allow you to swap the mouse buttons (right to left, and left to right). This function is convenient for those who work with the mouse with their left hand, i.e. for left-handers. To enable this feature, check the box.Swap button assignments.
In the next block, you canadjust double click execution speed. To do this, in the line Speed click once on the slider and without releasing the mouse button, drag it to the right or left. If you drag to the right, the double-click speed will be above , and if you drag to the left, then below . After that, you can test the double click speed by double clicking on the folder icon. There are 11 divisions for setting, so you can easily choose the most convenient speed for yourself.
In the block Sticky mouse buttonYou can enable or disable this option by checking or unchecking the Enable Sticky box.
Sticky mouse buttonallows you to drag and select without holding down the button. To turn it on, briefly hold down the mouse button. To turn it off again, click on an empty area of the monitor.
After configuring all settings, click OK .
For mouse pointer settingsgo to tab Pointers.
In the Scheme block, you can change mouse cursor. To do this, click on the self-extracting list and select the cursor scheme that suits you best.
In chapter Setting you can change mouse pointers. It is enough to double-click on the desired component and select a separate cursor for it.
If you want to cancel the mouse pointer settings you have made, then click on the button Default.
Also you Enable Pointer Shadow by ticking this box. If you want the cursors to change when changing the theme, then check the box Allow themes to change mouse pointers.
After completing pointer settings, click OK.
To configure the pointer parameters, go to the tab Pointer Options.
In the block moving you can adjust the speed of the pointer. To do this, click on the slider and, without releasing it, drag it towards the words Below or Above. I also recommend checking the box Enable enhanced pointer precision.
In the block Visibility You can enable or disable the following components:
- Display the trail of the mouse pointer.
- Hide the pointer while typing.
- Indicate the location of the pointer when pressing CTRl.(while holding down ctrl keys, after each mouse click, circles will appear around the mouse).
After completing the settings, click on the button OK.
