Despite the fact that updates to the operating system of the iPad 1,2,3 or another model in 90% of cases are associated with the transition to new version, some users want to roll back. In other words, downgrade the firmware. The reason may be dissatisfaction with the operation of the system or the complete inoperability of the tablet.

The possibility of a rollback really exists. How to perform this operation on any iPad models (2,3.4, iPad mini) will be discussed in detail in this article.

Starting in 2009, the Apple company began to carefully monitor which variations of iOS can be returned to a particular device. Therefore, before starting the firmware, it is now required to check whether a rollback from your gadget is possible in principle. And if so, which version.

For this purpose, it is recommended to use various services, of which there are many on the network (like Appstudio.org). There, the user will be able to see a list of available versions to which you can switch. After selecting a specific type of firmware, you will need to download it to your PC / laptop.

The download process consists in choosing the type of device, its generation and firmware version. Then the download process will start automatically. Then you will need to select a location on your PC to save the file in order to apply it for rollback in the future.

Making a backup

In the situation with Apple, there are very few non-standard situations, but it will not be superfluous to create a backup. Remember this rule: first create a copy, and then install the firmware, but not vice versa.

This operation is performed through iTunes or the "cloud". It will also not be superfluous to have a copy of photographs, videos with video and audio for their future upload to a tablet. Files of this type will not be 100% included in the backup.

It should be noted here that when saving a copy in iTunes, it will be available only for the ninth operating system. Therefore, if the user does not have a copy for the eighth variation of iOS, upon successful rollback, they will have to set up the phone as a new one. If the operation in the process is interrupted for any reason (for example, due to an error), it will always be possible to return to the nine.

In the cloud situation, all backup data will be restored regardless of the version of the installed iOS. Therefore, we put the "cloud" in a priority place. And if this step is not available, you will have to save to iTunes.

Turn off the device search function

If this option is active on your device, you should disable it before the rollback procedure. Otherwise, the utility will generate an error. And this will happen at the very start of the procedure.

You can deactivate the function in one of 3 ways:

• Through the device settings in the "clouds" menu.
• In the iOS program of the same name (you can download it for free).
• On a PC / laptop with any operating system.

But it is important that the tablet from which the work will be done is connected to the network.

Rollback method to the previous operating system

There are 2 ways to perform this procedure:

• using RecoveryMode4
• using DFU.

The first mode is emergency. It's meant to be restored normal functioning gadget after it has stopped working normally.

DFU is essentially the same. The only difference is that the operation is performed bypassing the operating system, and is done directly through the firmware. This method is recommended when the first method cannot be used.

Rollback iPad 2 Firmware: Recovery Mode

Initiate tablet shutdown first and wait for the display to fade. Connect your device to your PC/laptop. The device recognizes the gadget in the mode we need. Then follow this algorithm:

• Launch iTunes and wait for the program to find the iPad. There are 2 possible scenarios for the development of events. The first is a pop-up window with a proposal to restore the gadget. If this is what you want, then you just need to click on the consent button. Second - if the utility does not react in any way, then you need to click on the tablet icon and find the restore point. Then you will need to select it while holding down the Shift or Alt element (depending on the PC operating system).
• A file manager will pop up, where you will need to make a choice of a specific variation of the firmware. You will need to find the pre-downloaded file.
• Select the firmware and click on the opening element.
  • Selecting the .ipsw view file.
  • Waiting for the process to complete. The program will do everything itself, on a full machine.
  • Disconnect iPad from PC/Laptop.
  • Turning off the tablet by pressing Power.
  • Turn on the device with a quick click on the same button.

When performing the procedure through iTunes:

That's all - the tablet is ready for further work, we successfully rolled back the firmware.

Flashing iPad with DFU Mode

Before the operation, the tablet version two or three (or any other) must be transferred to the named mode. For this purpose, you need to connect the device to the PC and turn off the mobile gadget. Further, at the same time, hold down the Home and Power button elements for 8-12 seconds. After this period, the first button should continue to be held, and the second should be released. And so on until the program recognizes the tablet in DFU mode.

• Select your gadget in iTunes.
• We are looking for a restore point.
• We select it by holding the Shift or Alt element (depending on the operating system).
• In the pop-up window, specify the firmware (or rather, the path to it) and click on the opening element.
• We are waiting for the completion of the operation that the program will perform automatically.
• We turn on the tablet and use it for its intended purpose.

This method should be chosen by those who have the firmware through recovery mode for some reason didn't go.

This concludes our tutorial. As you can see, there is nothing complicated in the rollback procedure. And there is no need to contact the repair shop and spend money. You can do everything yourself, because now you know how to install older firmware on an iPad. Even a beginner will cope.

It happens that after updating an application for iPhone or iPad, you need to make a “rollback” and the question arises of how to return to the previous version. User AndreyYu on geektimes.com solved the issue.

Previously, getting the ipa file of the application was a matter of 2 minutes, it was enough to go to apptrackr and download it, but it stopped working and no other similar resources were found that would honestly download the ipa file (but suddenly you know such?).

Subscribe to our Telegram channel for more useful tips

There are the following ways to get the old version of the application:

1. You have an old backup of applications from your phone in iTunes and then you can simply copy the application back (but I didn’t have this).
2. Use the method described in haste by someone on the Internet using software called Charles. This method described on resources like 4dpa and re-copied by many people without understanding what is written there at all, however, without an additional> 100 grams it is difficult to deal with this scribbling.

Perhaps I will do it more fully, with pictures and in a simpler understandable form. In general, it will take about 5 minutes to download the software of the old version from the AppStore, and in my case Mac OS X. The method will obviously work on Windows as well. the Charles application is also available for this system.

All your suffering will begin even before you download Charles. The fact is that if you update iTunes on a Mac, then you will not be able to install applications starting from version 12.7. To get it back, you need to install back version 12.6.4.

What to do next to rollback app update on iOS

Short: download app from AppStore in iTunes, then enable proxy, then download again, edit request, submit request, get old version, install.

Detail: After starting Charles, you need to install the application certificates in Mac. This is done through the menu. Help → SSL Proxying → Install Charles Root Cetrificate. The certificate then needs to be transferred to the Always Trust status in Keychain Access. If you do not install, then there will be errors and the method will not work.

In iTunes, we are looking for the Inoreader application (this is suitable for any application, but I was only interested in it at that moment), launch Charles and click in the Download application installation window:

In the Charles window, you have a similar line with the word "buy" in the address, associated with the apple server:

For information, you can pay attention to the fact that the size of the downloaded file is 20.4 mb:

Then you need to enable SSL Proxying to intercept and edit requests:

Because, most likely, you have fast internet and the application has already loaded into the application library, then you need to delete it from there.

Once again, we check that SSL Proxying is enabled and proceed to re-download the application from the AppStore, while you need to pause the download so that you have time for the next steps. After clicking on Download in the Charles window, another line will appear in the apple server containing the word "buy". Expanding this line you need to find buyProduct:

On the right side of the window, click on content and choose below XML Text. Scroll down until we find softwareVersionExternalIdentifiers with a list of incomprehensible numbers.

These numbers act as application versions. Accordingly, the smaller the number, the older the version of the application. How do I know which version of the application will be downloaded? For example, I randomly took the value 823964615 from the end of the list:

Now we need to check the application version. To do this, we do get up on "buyProduct" and select in the menu Compose and on the right side of the window is the Text view.

At the very top of the field there will be a familiar set of numbers after the parameter appExtVrsId. This set of numbers is current version applications.

Instead of these numbers, we substitute the 823964615 copied above and it should turn out like this:

and do Execute. The program will give you a window and select the display mode XML Text we can find the bundleShortVersionString parameter at the bottom and see that the value we have chosen corresponds to version 5.4.4, which is what I need in my case, because this version is almost the latest before upgrading to 6.0

There is one step left. You need to download the whole thing. To do this, in our last edited buyProduct request with the received version 5.4.4, select in the menu Breakpoints.

On a new one, go to the AppStore to download the Inoreader application (if the application managed to load into the library and you did not have time to stop it, then simply delete it so that you can download it again).

As soon as you click download in iTunes, the Charles window will pop up, where you will need to click on Edit Request and in the already familiar appExtVrsId parameter, correct the version to 823964615, click Execute, and then again on Execute.

As a result, you will start downloading the application and you can see that the size of the application has changed to a smaller side:

A program icon will appear in the itunes app library labeled Update. This will mean that you did everything right. You can do Get Info of the application and it will be written:

Upon completion of the work, you should do in Charles Disable SSL Proxying by clicking on the p30-buy.itunes.apple.com server.

I must say that I managed to do this procedure 2 times.
I hope this will be as useful to someone as it was to me.

There are a lot of new things in iOS 11, such as features like automatically connect to weak Wi-Fi and more, but just because everything has changed does not mean that they are better, as a result of this, you can roll back ios. So if you've upgraded to Apple's latest OS and decide it's not for you, you'll be happy to know that you can still revert to iOS 10.3.2. But this window of opportunity for downgrading won't last forever.

When iOS 11 goes official in September 2017, Apple will stop signing older firmware versions. That is, you won't be able to roll back if you haven't saved your SHSHS2 Drops. Also in the new version of iOS there are a lot of new wallpapers.

However, until that day comes, it's actually pretty easy to go back to iOS 10.3.2. All you need is a Mac or Windows PC and the process only takes a few minutes. Even better, you should be able to save all your apps and data, so let's go ahead and get started, shall we? Download minecraft for ios for free.
"Update" for iOS 10.3.2

This guide will outline two iOS rollback methods that aim to restore the IPSW firmware file using iTunes. For most people, the steps in Method 1 should be all you need.

However, there is a small chance data from iOS 11 may cause errors or crashes after you upgrade to iOS 10.3.2. Again, this is rare, but if it does, you can use the steps outlined in method 2, to wipe the corrupted data and then restore the old iCloud backup of your data.

First of all, you need to download the iOS 10.3.2 IPSW file for your specific device. This is the firmware file that you will install using iTunes to roll back the operating system, and luckily we have a reliable source where you can get this file. So go to the following link from your computer, then select your device and model.

Then select iOS 10.3.2 when prompted, then click the Download button. The file is quite large, so it may take some time to download, but be sure to note the location of the file once it is complete.

Rollback iOS:Step 2 Install Old Firmware from iTunes

Next, connect your device to your computer with a Lightning cable, then open iTunes if it doesn't automatically launch. From there, click the phone icon near the left upper corner window to go to the device menu.

From here, make sure the " Summary» is selected in the left part of the window. After that, if you are using a Mac, press and hold the button Option on keyboard. Otherwise, if you're using Windows, press and hold the Shift. While holding the keyboard button, press "Check for Updates".

The file browser menu will then appear - use this to locate and select the IPSW file you downloaded in step 1. Once you've done that, click Open.

After a few seconds, you will see a pop-up informing you that iTunes will now install iOS 10.3.2 on your device. Click "Update" here, then sit back and wait because the old firmware installation process will take up to 30 minutes. Along the way, you may be prompted to enter your PIN on your device, so be sure to do so if asked.

Once iTunes finishes installing the old firmware, your device will automatically restart. When this happens, disconnect your phone from your computer, then follow the prompts on your phone to re-enter your passcode and complete the setup.

iOS Rollback: Step 3 Delete Your Beta Profile (Beta Users Only)

You will now be back on iOS 10.3.2, but if this is your first time using the beta for iOS installations 11, you will soon be prompted to reinstall iOS 11.

To avoid this, go to the menu " General" in "Settings", then scroll down and tap "Profile". From there, select your beta profile, then click "Delete Profile" at the bottom of the screen. After that, you won't be prompted to install iOS 11 again until the official launch in September.

At this point, you are all set and ready to go. The vast majority of users won't have to worry about the second method below, but if you run into any bugs or glitches, just go back and work through the next section.

Method 2 Restore from iCloud backup (only if you have errors)

This next method is only for people who experience errors after upgrading to iOS 10.3.2. This is rare, but it can happen when leftover data from iOS 11 is left that is not fully compatible with iOS 10.3.2.

If so, the easiest workaround is to restore from the IPSW file again. But this time, don't save your existing data and instead restore it from an old iCloud backup. Alternatively, you can perform a factory reset to clear corrupted data, but the method in the following steps is slightly faster.

Rollback iOS:Step 1 Find your iOS 10.3.2 backup

First of all, keep in mind that downgrading your firmware using this method will delete existing apps and their data. This means that you will need to save important things. However, iOS 11 backups cannot be restored to iOS 10.3.2, which presents a problem.

You will only be able to restore all your data if you have an archived backup of iOS 10.3.2 (or older). Which was done before downgrading using method 1. You should have done this iTunes backup when you first installed iOS 11. You may try to back up after using method 1, but some of the problems may persist.

iCloud should have backed up automatically the last time I ran 10.3.2, so most people will be fine. But to check, connect your device to your computer, then click the phone icon in iTunes to view your backups.

The information provided here does not include iOS version numbers. Therefore, you will need to check the dates of your backups to make sure they were created the last time you ran iOS 10.3.2 (or older). If they were, you would be able to get your data back. Otherwise, you will need to start over.

Rollback iOS: Step 2 Turn off Find My iPhone

Then you need to turn off Find My iPhone. To do this, go to Settings, then tap your name at the top of the list and select iCloud. From here, select Find My iPhone, then turn off the toggle switch on the next screen.

Rollback iOS:Step 3 Downgrade again

Then reload the IPSW file for your device, if you've lost it since using method 1, then the rest of the process is pretty straightforward. It's basically the same as the first one with one minor exception, so you can use the screenshots above for a visual reference. Connect to get started iOS device to your computer, and then follow these steps:

1. Open iTunes.
2. Enter the "Device" menu.
3. Select the Summary tab.
4. Hold key Option(Mac) or key Shift left(Windows).
5. Click "Restore iPhone" (or "iPad" or "iPod").
6. Open the IPSW file.
7. Confirm your selection by clicking the "Restore" button.

As with method 1, iTunes will take care of the rest and your device will reboot after it's completed.

Rollback iOS: Step 4 Restore Data from iCloud

Once the process is complete, run initial setup on your iPhone. Then choose "Set up as new" if you want to get started new launch, or Restore from iCloud Backup. If you want to get all your apps and data back. If you're going with the latest, just sign in with your Apple ID and then choose the most recent iOS 10.3.2 backup and your apps and data will be restored. You can also select "Restore from iTunes Backup" if you backed up iOS 10.3.2 before installing iOS 11.

Without iOS 11 corrupted data, you will no longer have problems with iOS 10.3.2. But if you run into problems with any of the methods above, let us know in the comments section below and we'll try to point you in the right direction. Also, if you want, you can turn off Autoplay Video in the iOS 11 App Store.

Reading time: 6 min

Let's figure out how to properly roll back iOS on iPhone on previous version operating system. In the article, we will consider specific example versions, but this is also true for newer iOS.

This article applies to all iPhone 11/Xs(r)/X/8/7/6 and Plus models on iOS 13. Older versions may have different or missing menu items and hardware support listed in the article.

Reasons for iOS Rollback

Users have reasons to rollback to more later version iOS systems can be completely different. Some may be dissatisfied with the visual changes in the interface design of Apple gadgets, which change in some details with each update.

Ask your question to a specialist

Do not know how to solve a problem in the operation of your gadget and need expert advice?

Others want the same stability in the device after the update. Problems began to be noticed by users who upgraded to iOS 12 on the iPhone. Even in iOS 12, there are new system items in the menu that users seem superfluous and not aesthetically woven into the smartphone interface itself.

There are also users who roll back iOS version post-release to check the overall performance of this feature against the official packages Apple. For example, we have already managed to find out that you can roll back from iOS 12 only to iOS 11.4, which is in the series iOS update 11 was the last.

Other versions of iOS are not covered by the company package subscription. This was mentioned in the official Apple blog.

Important nuances

• During the rollback process, the device must be reset, and then restored from a copy. This will take some time, depending on your internet connection and the amount of data you have.
• You should start rolling back when you have a backup of your gadget in iTunes or iCloud.
• A standard copy of iTunes or iCloud will be based on iOS 12, so after rolling back to iOS 11, it may not function properly. Use better copy, which is saved to anyone as iOS 12 was installed.

Rollback from iOS 12 to iOS 11.4.1 without losing information

This method is risky, but it can be used to roll back from iOS 12 to iOS 11.4.1 without losing data. Another process is faster than the second method, which we will discuss later.

To roll back from iOS 12 to iOS 11.4.1, follow the instructions:

you can use alternative way if this one didn't work. For it, you need to have a saved backup copy of the gadget, which was created before installing iOS 12.

Rollback from iOS 12 to iOS 11.4.1 using the restore method

• Download the firmware file for your device https://ipsw.guru/firmware/11.4.1/.
• Launch iTunes on the computer.
• We connect a gadget with iOS 12 to the computer.
• Now you need to enter the device into DFU (recovery) mode. On the different models this process is different.
• In the iTunes window that appears, click on "OK".
• Hold down the “Alt / Option” button on a Mac or “Shift” on a Windows computer, then select “Restore ...” your gadget.
• Select the iOS 11.4.1 ipsw.
• Click "Restore" to continue.
• The user will be shown information about version 11.4.1. Click "Next", then "Accept".
• iTunes will install the latest version on your device. The whole process takes approximately 10 minutes.
• When the process completes successfully, the device will display the familiar power-on screen. The device can be restored using a saved backup.

If any errors occur during the rollback, then most likely the downloaded firmware is not for your model.

Hi all! In today's topic, I would like to continue the conversation about the iPhone. In particular, in one of my past articles, I already said, and so today's article will be a continuation ...

When the smartphone starts to work incorrectly, first of all, you need to check the operating system. The most common reason for poor quality iPhone work are crashes in iOS. Defects appear due to malware, clogging the system with unnecessary software or iron conflict with a certain version of the operating system.

How to return to the previous version of iOS?

I already talked about how to update or restore a gadget, in both cases we used standard schemes. But sometimes the current version of the operating system is too "heavy" for the gadget, usually this happens with outdated iPhone models. The user updates the gadget and realizes that the new version of iOS overloads the gadget. Having entered the settings, the owner of the smartphone discovers that there is no "Go back" button in the settings. After studying this issue, I found a fairly simple way to return to the previous system, that is, manually install the iOS we need.

The difference from recovery

Surely you have already encountered the restoration of the gadget. Very often, users mean three actions at once under one concept of “flashing”. Let's briefly go through each option so as not to get confused in the future. With our smartphone, we can perform the following manipulations:

Recovery - returning the gadget to initial settings, while all data and content from the device are deleted, the smartphone receives a clean operating system.

Update - Using iTunes or the built-in iPhone tool, you can update your operating system to the latest version, personal data and content are preserved.

Rollback - means returning to an earlier version of the system, using special tools, the user can select any firmware for his gadget, including custom.

In this material, rollback is analyzed in detail. Follow my instructions and you will be fine. I recommend performing this manipulation only for those gadgets that began to slow down after updating to the latest version of the iOS operating system.

Preparatory stage

Before installing an alternative version of iOS, you will need to follow a few simple steps. Let's start with Reserve copy. No one is immune from a sudden error during a rollback, so you need to save all the data on your smartphone. backup you can create using the standard tool in the iPhone. We go to "Settings", in this section you will find the menu "Recovery and Backup". With the help of simple manipulations, you can protect all your data from loss.

The second step is to select the desired version of iOS. If you need a rollback, chances are you already have the correct operating system. If not, then on this resource http://appstudio.org/ios you will find the required firmware.

Download it and save it on your computer, since we will roll back using a PC.

You can also download iOS from this site http://getios.com/ Go to the resource and find the field where you need to specify the type of your gadget "YOUR DEVICE". In the next window, you should drive in the model, after which a window with iOS options that will work on your iOS will become available. It remains only to download desired version. The screenshot above shows the selection menu in detail.

Rollback process: instruction

We take a charged smartphone and connect it with a cord to the computer. Launch iTunes. IMPORTANT! The program must be the latest version, to update, go to the "Help" - "Update" tab. The app will automatically download latest version and restart.

Now you need to wait until the program sees your device, it usually takes a few seconds, so you won't have to wait long. You will also need to select the type of your gadget, for this you need to select the appropriate section in the settings or simply press the “Ctrl + S” combination on the keyboard.

In the window that appears, click the "Browse" button, and then click the "Update" button. If you are using a computer with operating system Windows, then you need to hold down the "Shift" key and at the same time click on the "Update" button. As for Mac users, you need to hold down the "Alt" key and click on "Update".

After that, a form will appear where you need to select a new version for updating. We will trick the system and click on a pre-downloaded firmware, which may be several steps lower. Thus, we will start the process of rolling back to the previous version. If the standard way to return the old firmware did not work, try using a special program.

Rollback with RedSnow

Download RedSnow from the official website of the developer and install it on your computer. The creators took care of the version for computers on Windows and Mac. Be sure to follow the preparatory steps above so you don't lose important data and content. I must say right away that this method takes more time than working in iTunes, but in some cases RedSnow cannot be dispensed with.

To roll back using this program, you will need to enter DFU mode on your iPhone. To do this, you need to connect the gadget to the PC, turn off the device, after the work is completed, simultaneously hold the "Power" and "Home" buttons for about 10 seconds. After that, release the power button, while the "Home" button should remain clamped. Wait until the program, in our case it is RedSnow, detects the device in recovery mode.

Rollback is performed as follows:

- Run the application on the computer and select the "Extras" section in the main menu and go to the "Even more" menu.

- Now click the "Restore" button. Here you will need to specify the path to the firmware file using the IPSW key.

- As soon as a window with a question appears, you should quickly click on the "YES" button.

- Now put the device into DFU mode according to the instructions.

- When the program detects the device, you will need to specify the path to the certificates, they usually come with the firmware file.

- It remains to wait for the completion of the process. The message "Restore Successful" will make it clear that you did everything right.

As you can see, it is not difficult to return to the previous version. It is important to determine whether you need it or not. If necessary, you can always upgrade to more new iOS, the rollback operation has no effect on this.