This guide will help you disassemble your iPhone 6, do it carefully. iPhone 6 has glued parts. If parsing occurs with effort, then something is going wrong.

When disassembling the iPhone 6 in a neat position, lay out all the parts, then you will have no difficulties during assembly. All information may also be deleted, so create backups everything that is needed.

1. Initially, unscrew the two Pentalobe screws with an asterisk screwdriver, they are located at the charging connector.

   

2. With a slight movement, separate the display with a suction cup, without damaging the cables. Next, using a plastic spatula and a suction cup, separate the display from the body on your iPhone 6.

   

3. To completely detach the cover on your iPhone, unscrew the 5 Phillips screws (indicated by orange circles).

   

4. Under the metal cover are 4 pins (indicated by orange rectangles), disconnect them with rounded tweezers.

   

5. The two screws that hold the brackets to the module, display and home button module, you need to unscrew with a Phillips screwdriver (indicated by orange circles in the photo).

   

6. The sound speaker is protected by metal brackets held on by 3 small screws, they need to be unscrewed (indicated by orange circles).

   

7. Now remove the audio speaker and carefully proceed to the display. Use tweezers to lift and remove the module.

   

8. Next, unscrew the 7 small screws that hold the LCD screen (indicated in orange).

   

9. Remove the SIM card slot from the iPhone 6. You can use a special paperclip.

   

10. Next, disconnect the battery, for this you need to unscrew 2 screws and disconnect the battery contact with tweezers.

    

11. The battery is attached to the back cover with an adhesive substance, you need to unfasten it with a slight movement, but without using a hair dryer. By pulling on the lower ledge located at the battery.

    

12. The rear camera is protected by a metal cover, which is attached to two cross guys. They need to be unscrewed (indicated by orange circles).

    

13. Above the contacts of the volume, power and antenna buttons is a protective cover, it is held by 6 screws. They need to be unscrewed with a Phillips screwdriver (indicated by orange circles).

    

14. Next, with a slight movement, lift the antenna and disconnect it.

    

15. The motherboard is screwed to the case with 5 screws, unscrew them (indicated by orange circles). The volume buttons, power buttons, the charging connector module and the power button cable have three connectors, we also disconnect them (indicated by orange rectangles). Next to the charging connector is a "coaxial" connector (indicated by an unfilled orange ring) that needs to be disconnected.

    To pull out the motherboard, finally you need to disconnect one ledge, it is located near the rear camera (indicated by a green ring).

    

16. Unscrew the 3 screws with a Phillips screwdriver, they hold the volume control cable (indicated by orange circles). Next, loosen the adhesive substance holding the cable with a hair dryer and finally remove this volume button cable.

    

17. Unscrew the 3 screws with a Phillips screwdriver, they hold the power cable (indicated by orange circles). Next, loosen the adhesive substance holding the cable with a hair dryer and finally remove this power button cable.

    

18. A vibrating alert module is attached to the charging connector, held by two screws. We unscrew with a Phillips screwdriver (indicated by orange circles). Next, you can remove the vibrating alert.

    

19. Now unscrew the 4 screws with a Phillips screwdriver. They are holding a loudspeaker (they are marked with orange circles). After unscrewing all the screws, remove the loudspeaker.

    

20. And finally, we find the small nine screws and unscrew them. These screws hold the module with headphone output and charging connector (indicated by orange circles) Now loosen all adhesive substances (bottom connector) with a hair dryer and carefully remove the module.

    

21. This completes the disassembly of your iPhone 6.

Worldwide. As usual, the guys from the iFixit team were the first to get hold of the new items and took them apart. To do this, they went to distant Australia and stood in a long line.

You hardly need disassemble iPhone 6 so soon, however, the situations are different and it is better to be prepared for self-repair and replacement of components in advance.

Using a special pentalobe screwdriver (you can use the proprietary 54 Bit Driver Kit), we unscrew at least “pentalobe” screws. Too bad Apple uses non-standard screws. The good thing is that the device does not need to be heated for parsing. Thank you anyway.

Next, we open the phone using a suction cup, or a special adhesive tape that leaves no traces (the guys from iFixit use a special iSlack tool). At home, it is better to hold the phone over a soft surface and in two hands, and, of course, not to do this while hanging.

The next step involves the unusual use of a boomerang. We recommend that you perform it exclusively under the supervision of a qualified specialist, since the use of a boomerang at home can harm not only the device, but also you and your loved ones. But let's be serious! It is best to turn off all the loops with a regular mediator, like any other plastic without sharp edges. Turn off the display cable and move on.

Inside are plenty of standard Philips screws. But a good set of screwdrivers from your local radio store will help with any type of screw. Using a simple screwdriver, we deal with the metal plate that holds the front panel.

Remove the Home button from the front panel. For this, the pliers from the manicure set are ideal.

Turn off the loops and remove front camera and speaker for detailed study.

To remove the battery, again use the plastic pick. If everything is done correctly, it will allow quickly and without mechanical damage remove the battery.

The iPhone 6 uses a 3.82V 1810mAh Li-Ion battery. On one side of it is indicated the power of 6.91 watts / hour, and on the other - 7.01. It seems that the engineers managed to improve the performance after the text for printing on one side was approved.

We take out the rear camera with tweezers.

We turn off and remove all antennas.

Hooray, we got to the motherboard! First we need to remove the protection from electromagnetic impulses to find out what's inside. So let's do it.

Now we remove the vibration motor module.

There are two types of vibration motors - counterweighted and linearly oscillating. Which ones are better? According to the guys at iFixit, answering this question is as difficult as choosing between Pepsi and Coke. It seems that this time Apple has opted for a linear oscillating type.

This year appearance dynamics have changed slightly. True, the lack of marking suggests that the changes compared to the speaker of the previous model are insignificant.

The charging and headphone jacks make up one module and are placed on the same cable. This means that you cannot replace one connector separately, only together. Of course, from a repairability point of view, this is a disadvantage, but for Apple, this saves precious space inside the device.

The last thing left to remove is the power buttons and the volume rocker. The tweezers will help us with this again.

That's all. On the iFixit repairability scale, the iPhone 6 scores 7 out of 10.

Such a high score is explained by the following factors:
+ The display module separates first, which simplifies the screen replacement procedure (the most common failure)
+ The battery is easy to change. All you need to do is unscrew the pentalobe screws and carefully remove the plastic seals.
+ The fingerprint sensor cable no longer interferes with opening the device (in 5S it could be very easily damaged)
- iPhone 6 still uses non-standard pentalobe screws that require special screwdrivers
Apple does not share iPhone 6 repair information with unauthorized independent repair shops and customers

Happy iPhone 6 owners, the latest news from Apple have access to a wide variety of functions - here is a motion sensor, and a gyroscope, and a barometer, and an updated photo and video camera, and ... You can list for a long time. But there is certain part users for whom this is not enough - in spite of a properly functioning device, they want, by all means, to look under the cover.

So, if you have such a desire and it does not stop you possible loss warranty rights, we will tell you how to disassemble your iPhone 6 with the least risk. Today we will tell about all the nuances of hacking an "apple" device. Present to your attention detailed instructions with photos. Let's break down your favorite gadget from the first to the last screw!
To disassemble the iPhone, at the beginning, you need to unscrew a couple of pentalobe screws that are located at the bottom of the device, at the end. Yes, yes, Apple engineers with a stubbornness worthy of a better use, they drive the screws exactly there. Actually, because of their non-standard shape, “apple” screws have received many disapproving comments on the Internet. To make this operation more convenient, we recommend using a special pentalobe - a screwdriver.

To carefully remove the screen cover, you can use adhesive tape that does not leave marks, or a suction cup. At home, we recommend holding the phone above a soft surface to avoid shock. We immediately warn you that the cover cannot be completely removed - this is prevented by the display cable, which is located in the upper sector of the device.

But, if desired, you can remove it too - with the help of a thin plastic plate. It is important that the plate is free of sharp edges.

Then, having carefully studied the internal “stuffing” of the iphone, you can see that other parts are fastened with standard screws. Thanks to this, you can easily remove the metal plate holding the front panel. Next, carefully, best of all, with tweezers, remove the "Home" button. The disassembly of the cover is completed by disconnecting the cable, dismantling the front camera, speaker.

Then, we proceed to the main part of disassembling the gadget. First, remove the battery. This is best done with the plate we used to disconnect the display cable. When carefully examining the inscriptions applied to the surface of the battery, you can see that with different sides different power is indicated - 7.01 kW / h and 6.9 kW / h. We hasten to reassure you - this is not a fake, apparently, "apple" engineers improved the performance after the text for printing on one side was approved.

We remove the antennas and the rear camera with tweezers.

Then you need to remove the protection against electromagnetic impulses. So we have reached the "heart" of the gadget - we have a motherboard in front of us.

More visual view close-up Apple processor A8.

In order to make the final analysis, it remains to remove the following parts: a microphone, a headphone / charger jack, a vibration motor, as well as power and volume buttons.

In this case, our tweezers will also come in handy. At this stage, the disassembly of the gadget is considered complete.

By the way, there are two types of vibration motors - these are linearly oscillating and counterweighted. And, although the choice was not very easy, in the case of iphone 6, the company stopped its eyes on a linear-oscillating type motor.
In conclusion, we can conclude that there is nothing super complicated in self-disassembly of the iphone 6. You can easily replace a broken screen, thanks to the display being removed first. As you can see, removing the battery is also not difficult. In this model, when compared with the previous smartphone from Apple, the fingerprint sensor cable does not interfere with the parsing procedure. In general, everything would be simple if there were no pentalobe screws.
And yet, once again we want to remind you that it is not recommended to disassemble your device on your own in order to avoid loss of warranty or damage.
But, as they say - if you really want, then you can.

In the confrontation between criminals practicing car theft and vehicle owners seeking to protect their property, high technologies intervened to provide car owners with guaranteed car protection. Car thieves have learned to successfully bypass the most sophisticated alarm systems, so the developers sent their... Read more

One of the main problems hindering the widespread adoption of electric cars is the low capacity of their batteries, and as a result, the limited range of autonomous driving. In addition, the problem of the availability of recharging places remains relevant. batteries. Startup from France EP Tender offered an obvious, although not without... Read more

Integration computer technology many leading high-tech companies in the world have recently been engaged in smart glasses. Bosch is one of them, but instead of a presentation, company representatives simply talked about the technology for journalists. The main reason for such a strange presentation is the complexity of the technical details... Read more

Problems with the Chinese coronavirus epidemic affect release schedules electronic devices, whose production is concentrated in China. However, at present Apple company seeks to overcome the problems associated with declining productivity of Foxconn assembly plants and remains hopeful for the presentation of the long-awaited "budget... Read more

Modern military actively use the advantages of unmanned aerial vehicles, such as mobility and invisibility. Belarusian engineers have made an attempt to use modern drones to combat lightly armored enemy vehicles. For this purpose, the Loitering Pipe and Kvadro-1400 UAVs were armed with a hand-held anti-tank ... Read more

At the end of 2014, sales of the new iPhone version 6 started. As always, many fans of Apple products who were interested in functionality device and its difference from previous versions phones of this company. Therefore, queues for the iPhone 6 lined up in front of stores in Europe and the United States a few hours before the start of sales.

Particularly inquisitive users are interested not only in the functions of a smartphone, but also in its "stuffing", because. in the event of a gadget breakdown, you need to be able to understand it internal arrangement Or at least have a superficial understanding of it. Repairing a device in workshops is sometimes expensive, so many owners of “apple” smartphones try to study all the elements of the device and the mechanism of their operation in order to independently perform a simple replacement of any part if necessary.

How to open an iPhone 6 and how to disassemble an iPhone 6, as well as how to perform these steps with an iPhone 6 plus model, is described in this instruction.

In order to disassemble the iPhone 6 correctly, you need to perform all the steps in a strictly defined order and very carefully and carefully so as not to get confused and break the fragile part. This is especially true for expensive parts such as the motherboard.

The iPhone 6 case should open according to the following algorithm:

1 Loosen the screws on the housing with the special pentalobe screwdriver. Recall that Apple uses non-standard screws, which makes it a little more difficult to open the case and requires the purchase of a set of tools for this purpose. By the way, such sets are sold in many online stores. 2 Opening the iPhone using a suction cup or tape that does not leave marks. Professionals use a tool called iSlack for this purpose.

When opening, it is better to work on a soft surface so that the device does not get damaged if it falls. And, of course, it is recommended to hold the device with both hands and not on weight.

1 Using a mediator, turn off all loops. Instead of a mediator, it is allowed to use any other plastic element without sharp edges. The first step is to turn off the screen cable. 2 Using a simple screwdriver, unscrew the screws that hold the front of the phone. 3 Remove the home button using nail clippers. 4 Disconnect the cables, remove the front camera and speaker. 5 Pick up the pick again and remove the battery. 6 Remove the main camera from the housing using tweezers. 7 Disconnect and remove all antennas in the device with the same tool. 8 So we got to motherboard. And here, initially, you need to remove the protection of electromagnetic impulses in order to get to the internal component. 9 Get the vibration motor. 10 Remove the power buttons of the device and the element that controls the volume of the sound. All this is done with tweezers.

This completes the disassembly process. This is what a disassembled iPhone 6 looks like:

Repair shop experts rate the ability to repair an iPhone 6 in the event of a breakdown by 7 points out of 10. This is a rather high estimate and it is explained by the following factors:

1 First of all, when disassembling the gadget, the screen is removed, which greatly facilitates the work of the master with the most common type of repair for Apple phones to replace displays. 2 Easy battery replacement. The procedure is carried out quickly and in 2 steps - by unscrewing the screws and removing the plastic seal. 3 Nothing prevents opening the case, for example, a fingerprint sensor cable, which in other versions of iPhones was easily damaged when opening the device.

Of the minuses of the repairman of "apple" devices in model 6, the following points are noted:

1 Using, as always, non-standard pentalobe screws, which can only be unscrewed with special screwdrivers. 2 Apple does not disclose the details of repairing its phones with workshops that are not authorized, as well as with ordinary users.

How to disassemble iPhone 6 Plus

If you are wondering how to disassemble the iPhone 6S PLUS - a slightly different iPhone model than the 6, see the instructions below. Usually, such a procedure is required if the user urgently needs to unlock the iPhone, but it does not connect to the Internet or does not synchronize with the PC, etc. In such situations, the owner of the gadget rightly decides that something is wrong with the "stuffing" of the device and often decides to open the case on his own.

To disassemble an iPhone 6 plus, follow these steps in sequence:

1 Loosen the pentalobe screws, as you did with the iPhone 6, using a screwdriver designed specifically for this purpose. This is not an easy task and requires patience. However, to whom you will not envy at all, these are the owners of the iPad, who, in order to carry out a similar procedure, resort to heating. 2 Open the smartphone case using a suction cup or adhesive tape. If you have iSlack available, of course, it is better to use it. 3 Remove the cable from Touch ID to the Lightning connector. 4 The entire "stuffing" of the device will open before your eyes. First of all, use tongs to remove the metal plate protecting the home button. 5 Carefully remove the module on the back of the case that houses the camera and speaker for calls. 6 Carefully peel off the front panel. 7 Remove the battery. 8 Remove the main camera using tweezers. 9 Separate the "motherboard" from the body of the device. 10 Get a loop of buttons for turning on and adjusting the sound level.

The smartphone model from Apple 6 plus was also rated by experts at 7 points in terms of repairability. The reasons for such a high rating are due to such indicators found in the process of opening the apparatus and a detailed study of internal elements, such as:

1 By simply detaching the screen module (the same can be said for the iPhone 5 and 6 versions). Screen breakage is the most common of all, so this indicator is very important. 2 An easy battery replacement procedure that requires only the presence of a special pentalobe screwdriver and the sleight of hand of a master. 3 Nothing prevents opening the gadget case, you can not be afraid to damage fragile parts - a fingerprint cable, etc. This problem, according to many repairmen, was typical for the iPhone 5S model.

The disadvantage of version 6 plus only one is that, as in version 6, this is the use of a non-standard type of screws that require the purchase of a special screwdriver. But for good workshops, this is unlikely to be a big problem, because. without the necessary set of tools, a high-quality repair of "apple" devices will be impossible.

Analysis of the iPhone 6S - another popular version of Apple's mobile device, see below.