1. Warranty for the services and products of Tonerman:
1.1. All types of services and products manufactured by Tonermen are guaranteed for a period of 1 year from the date of purchase or the provision of services, or until the end of the toner in the print cartridge (the end of the toner is considered to be 10% of the remaining norm declared by the manufacturer).
1.2. Warranties include:
1.2.1. Troubleshoot detected problems in the print cartridge.
1.2.2. Replacement of the print cartridge at the expense of Tonerman if it is impossible to eliminate the malfunctions found in it.

2. Warranty obligations for devices that use Tonermen print cartridges:
2.1. Printers using Tonerman cartridges are covered by a 1-year limited warranty from the date of purchase of the print cartridge used in this printer.
2.2. Warranties include:
2.2.1. Repair of the printing device in case its failure is provoked by the operation of the Tonerman print cartridge in it;
2.2.2. Provision for the time of repair of another printing device to replace the faulty one;
2.2.3. If repair is not possible, replace the defective printer with a similar one.

Only quality toner.

Warranty until the end of the life of the cartridge.

Departure in Moscow - free of charge.

Refilling the cartridge is done with the replacement of the chip.

Refilling the KYOCERA printer.

To refill Kyocera cartridges, we use only high-quality Tomoegawa toner, the highest quality compatible toner for Kyocera, which has a positive effect on print quality and the life of the printer's printed circuit units.

We refill cartridges in the following models:

- Kyocera TASKalfa 1800

- Kyocera TASKalfa 2200

- Kyocera TASKalfa 1801

- Kyocera TASKalfa 2201

Refilling cartridges includes the following operations:

• - Disassembly of the cartridge
• - Evaluation of cartridge elements for serviceability
• - Cleaning the cartridge from the remnants of unused toner
• - Refill with new toner
• - Assembling the cartridge
• - Replacing the chip in the cartridge with a new one
• - Checking the performance of the refilled cartridge
• - Issuance of a guarantee for the work performed

The service for refilling cartridges KYOCERA TK-4105 for laser printers is provided on the territory of Moscow and Moscow suburbs.

How TK-4105 cartridges are refilled in our company.

Refilling cartridges TK-4105 printer KYOCERA comes with certified high quality toner. Cartridge refilling service includes cleaning of old toner residue and refilling the cartridge with new toner.

The client personally chooses where the cartridges will be refilled. If you do not have the opportunity to come to our office, our masters will come to you. To perform cartridge refilling on the road, you need to provide our specialist with a workspace - a clean table. Refilling the cartridge on the road takes 10-20 minutes.

It is also possible to order services on holidays and weekends. To leave our master you need to fill out only an application.

Thanks to many years of experience, we refill cartridges efficiently and quickly, guaranteeing the serviceability of the cartridges without time limits, up to the exhaustion of all the toner.

If the client wishes, our representatives have the opportunity to exchange refilled cartridges for empty ones at the address specified by the client or carry out express refilling of cartridges on the spot. When ordering our services for refilling cartridges from 2 pieces or more, you get a discount.

Today, due to the active activities of various companies and the use of various printing equipment, the service of refilling cartridges is very popular. That's why this species activity is the core for many companies.

Refilling cartridges for different models printing devices and MFPs is a very complicated procedure. Therefore, many office workers and home users of office equipment prefer to use the services provided by specialized companies and professionals. It is the refilling of the printer cartridge when using high-quality toner that allows you to extend its service life, continue to fully use the device without losing the quality of prints.

Also, the CHIP installed by the manufacturer, which blocks the printer when the limit of prints is reached, makes it difficult to refuel some devices. Such consumables require not only refueling, but also additional flashing of devices. This service is provided by special service centers that refill cartridges, restore them, and replace chips. Using the services offered by companies specializing in servicing modern office equipment, you can also save significantly, because refilling a toner cartridge (or using a compatible consumable) makes it unnecessary to purchase an original cartridge, which is quite expensive.

In the article we will tell you how Kyocera cartridges are refilled.

Kyocera printers are considered the most common for office use: monochrome -FS1025MFP, 1020MFP, FS1060DN, FS1125MF/6025/1035/1040, Kyocera taskalfa 1800/2200/, Ecosys FS1060DN, color - Ecosys FS p6021CDN and others. Accordingly, consumables that are compatible with these devices (TK 4105, TK-475, TK 1140, TK-3130, etc.) are in demand. How to refuel the cartridges required to work on these units, read below.

Most often in an office environment, a monochrome laser printer is used to print black and white documents. And since there are a lot of varieties of models today, to restore the functioning of the device, when the ink runs out, you can use compatible with several representatives at once model range devices.

Refill cartridge Kyocera TK-1110/1125

So, for example, the kyocera TK1110/1120/1125 laser black cartridge can be used in devices: FS1025MFP/1020 MFP /1120MFP/1040, Ecosys FS-1060DN, 1125MFP (TK-1125 works with Ecosys FS-1061DN, 1325MFP). Even though there are so many device names, the installation cartridge configuration is the same for all of them. Therefore, the procedure for refilling the laser toner cartridge will be the same.

In order for refilling the Kyocera TK-1110/1125 cartridge to subsequently produce high-quality prints on the FS1025MFP/1120MFP/1020 MFP/1040, Ecosys FS-1060DN, etc. devices, it is necessary to choose the most optimal toner option. The toners for Kyocera TK340 /TK350/360 showed quite decent results in the quality of finished images. For one refueling procedure, you need about 90 gr. toner. Also, this procedure involves the replacement of the CHIP. Otherwise, if the consumable is refueled without replacing the microcircuit, as a result, an inscription about the use of a non-original element may appear, which is also recorded in the device's memory. This is fraught with the user that in the event of a warranty claim in service center, specialists have the right to refuse on the basis of the use of the device that does not comply with the terms of the contract.

It should be noted right away that the Kyocera TK-1110 and TK-1125 are considered consumables that are easiest to fill. But still, to carry out the procedure, you will need to prepare a workplace, and then remove from the printer (FS1025 MFP / 1120/1040/1020 MFP, Ecosys FS-1060DN) a black tube with a handle, a cork on the body (through which the toner is filled at the production ) and CHIP. You won’t learn to go the simpler way and immediately pour the powder through the lid, because after filling it is sealed. Therefore, it is necessary to first replace the CHIP, which is held by plastic rivets. After that, a hole should be made in the body of the TK-1110 or TK-1125 cartridge (using a drill or a hot tube of small diameter). To do this, the consumable is installed with the end of the wide part up so that the handle is on the surface. On the top cover approximately in the middle, closer to the upper edge, a hole is made and toner is poured into it. After that, the edges are wiped, and the hole is sealed with reinforced tape. Now the Kyocera TK-1110/TK-1125 cartridge can be inserted into the printer (FS1025MFP/1120MFP/1040, Ecosys FS-1060DN, etc.) and continue printing.

Refilling cartridge Kyocera tk 1140/1130

Refilling the Kyocera tk 1140/1130 cartridge, which is suitable for use on FS-1035MFP/FS1035DP, FS-1135MFP, ECOSYS M2035dn, M2535dn devices, takes place in a slightly different way. However, the use of high quality toner is also important for the procedure.

The Kyocera TK 1140/1130 consumable itself is a hopper with a lid on the side, which should be opened and the reservoir cleaned of toner residues.

Refilling the TK-475 Toner Cartridge

To refill the black toner cartridge TK-475 for FS-6530MFP, FS-6025/6030/6525, compatible with TASKalfa-255/255b/305, it is necessary to equip the workplace with a surface to protect it from toner residue. Then, removing the black container from the printer, you can start refilling. It is recommended to use the appropriate toner cartridge model - TK-475 for the procedure. There should be no problems with refilling compatible consumables, since refilling is carried out through a plug on the container. Through it, you first need to remove the remaining toner, and then fill in the new powder and close the lid, wipe and install the consumable in place. There may be problems with refilling the original TK-475 cartridge, as they have a CHIP that needs to be replaced. As in the previous case, when the Kyocera TK 1140 cartridge was refilled, an additional hole needs to be drilled. Through it, the reservoir is freed from the remnants of the powder, and then a new one is poured. Then this container must be returned to its previous form by sealing the hole with a dense film. Next, the TK-475 can be inserted into the printer.

The black cartridge TK 4105, suitable for work on Kyocera TASKalfa 1800/1801/2200/2201, like TK-3130 for FS-4200DN, 4300DN, is not very difficult to refill. The compatible consumable container opens and is freed from toner residue.

If the design of the TK 4105 cartridge is original, not only very careful refilling will be required, but also a chip replacement in order to remove the restriction and fully use the printing device. The main thing to consider when refilling cartridges TK 4105, TK-475, TK 1140, TK-3130 or any other is a thorough cleaning of the reservoir from the remnants of the used powder. Otherwise, not only the print quality may suffer, but also the device itself. Therefore, users of Kyocera corporate or home devices prefer to use the services of professionals who refill TK 4105, TK-3130 and other cartridges quickly and only with high-quality toner.

Refilling the taskalfa 1800 laser cartridge, which is compatible with the kyocera taskalfa 1800 monochrome printer, will also take a little time. A hole specially provided for filling the toner, closed by a lid, is located on the side. By opening it, the tank is freed from the remnants of the waste powder. After that, you can pour new toner into the container and replace the chip if necessary.

Since original cartridges may have problems due to a sealed plug, and a new hole will need to be made, it is better to turn to specialists with this. In such companies, they will thoroughly clean the consumable, fill it with fresh powder and replace the chip.

How are Kyocera color cartridges refilled?

The stock of Kyocera Ecosys P6021CDN color laser printers, which operate using black, cyan, yellow, and magenta consumable toners, can also be restored at service centers whose range of services includes such activities.

To refill the Kyocera P6021CDN color printer, you will need a high-quality toner that allows you to get clear prints after such manipulations. And for the Kyocera p6021CDN model, they need 4 (TK-580C cyan, TK-580K black, TK-580M magenta, TK-580Y yellow toner). But the feature of refueling these device models is not only this. In order to fully use the consumable element after the refueling procedure, the CHIP installed by the manufacturer must be replaced. Acting as a printed sheet counter, it will not block operation on the p6021CDN printer, but will transfer data on the use of non-original cartridges to the memory buffer.

Therefore, in specialized centers, microcircuits are first replaced, after which refueling can be carried out. In particular, the Kyocera Ecosys P6021cdn has a cartridgeless system. This originality of the design complicates the procedure for filling the element with toner, which once again confirms that it is better to use the services of specialists to fill the printer.

Refill cartridge TK-4105 Black for color copiers Kyocera TASKALFA 1800, 1801, 2200, 2201 for 15,000 copies at 5% page coverage with chip replacement

Characteristics:

At refill cartridge TK-4105 (Black) the following process is followed:

• Cleaning the case and bins from waste toner
• Gear lubrication with high temperature grease
• Contact lubrication with conductive grease
• Filling with new toner
• Chip replacement
• Cartridge check
• Packing in Airbag and carton

Cartridge Chip Replacement Cost TK-4105 already included in the cost of refueling!

Information about the product on the site is for reference only and is not a public offer (Art. 437 of the Civil Code of the Russian Federation). Product characteristics and specifications, as well as the scope of delivery of the product may be changed by the manufacturer without prior notice.

Main characteristics

Type of

laser cartridge

Manufacturer

Color

Compatibility

Kyocera TASKalfa 300

Product type

Cartridge refilling

Printer type

monochrome laser printers and MFP

Payment for orders

You can pay for your order with any of the possible ways: cash or bank card in our office, in cash on delivery, by bank card or electronic money when placing an order on the website online, pay by invoice from legal entity or IP. You can choose the payment option that suits you when placing an order in the shopping cart.

Please note that the price indicated on the site already includes VAT 20%, no commissions and additional fees.

With any of the payment options, you will be given full set documents:

• Cash payment: cash and sales receipt
• Payment by card in the office: cash and sales receipt
• Payment by card on-line: electronic cash receipt to the mail specified during registration
• Payment by cashless settlement: UPD and invoice

Delivery of orders in Moscow and Russia

Order the delivery of the selected product: let the purchase itself come to you, and we will notify you in advance by message or call.

Delivery by own courier service Smart Office

Delivery to the regions through TC and PVZ

As a partner for the provision of services for the delivery of orders to the regions, Moscow Region and PVZ, we have chosen the aggregator of courier services - Yandex.Delivery. Yandex.Delivery combines many courier services, allows you to deliver orders to customers on time and within reasonable price. Here are some of the partner companies that are part of the Yandex.Delivery logistics network.

Refill cartridge Kyocera TK-4105 (1T02NG0NL0)! How it works?

In order to provide the highest quality services to our customers, in the round-the-clock service center "MosToner" refilling a laser cartridge Kyocera TK-4105 (1T02NG0NL0) produced in just 4 steps:

• STEP #1. Place an order at any time convenient for you
• STEP #2. Free departure of the master within the Moscow Ring Road
• STEP #3. Free cartridge diagnostics with subsequent refilling
• STEP #4. Cash or non-cash payment upon completion of work

On a note! Servicing Cartridges Kyocera at the specialists of the company "MosToner", you save not only your money, but also time. For example, the filling procedure 1T02NG0NL0 takes no more than 10 minutes!

Get a discount for refilling cartridge Kyocera TK-4105 (1T02NG0NL0)

The MostToner SC presents some of the most affordable prices for refilling cartridges in Moscow. However, you can always count on additional discount if you find a similar offer at a lower price.

For regular customers and wholesale customers we have special loyalty programs. For details, please use the form or call contact number phone.

To receive up-to-date information about current promotional offers, it is not necessary to regularly follow the news on home page site, for this it is enough to subscribe to the newsletter in the corresponding menu at the bottom of the screen.

Also, the service center "MosToner" regularly gives promo codes to their clients with individual discounts, with which you can save from a couple of hundred to several thousand rubles, depending on the frequency and cost of orders.

Attention! Promo codes must be entered during checkout as shown in the image.