Receiver/media player HD-501RU with remote infrared receiver and powered by USB TV or outdoor unit power supply (included in the kit), is designed to receive open digital DVB-T/T2 programs of any resolution (SD and HD) and, if necessary, provides the function of recording broadcasts to an external USB drive. This type The receiver can also be used as a media player (for example, listening to music files, viewing photos or movies recorded on any media).

The receiver connects to the TV via a composite video output or an HDMI high-definition signal transmission interface.

Receiver HD-501RU It is designed to be placed behind a TV or in a car, as there is a remote IR sensor in the package.

Assembled receiver HD-501RU based on MSTAR7T01 processor. The digital tuner allows you to stably receive DVB-T2 channels even while driving, provided that the distance from the signal source is within 10-30 km.

Assembling the DVB-T2 receiver Ether HD-501RU produced in Novosibirsk. Low cost at complete set basic functional properties provides it with a wide demand.

Peculiarities

• Low cost. Miniature receiver (98x48x18 mm).
• Portable infrared receiver. The receiver is designed to be placed behind a TV.
• Reception of DVB-T/T2 digital TV signals on analog TVs.
• Decompression of MPEG-2 and MPEG-4 compression standards.
• Video resolution support: 1080p, 1080i, 720p, 576p and 576i.
• Multilingual menu.
• PVR and TimeShift functions (recording to HDD) using external USB drives.
• HDMI digital audio/video output.
• Analog composite audio / video output (3RCA-3.5 Jack) for older TVs.
• EPG (electronic program guide) for 7 days (determined by DVB-T2 provider).
• Automatic and manual search on all channels.
• Small-sized (108x40x18 mm) convenient intuitive remote control remote control(PDU).
• Power supply + 5 V through the central core of the cable to the mast amplifier.
• Modern processor Mstar 7T01.

On the front and side panels of the receiver are

On the back of the receiver are

Assigning buttons on the remote control

Technical parameters of the receiver

Technical passport for the DVB-T2 receiver "Air HD-501RU" >>>

Related products

Connecting cable HDMI-HDMI gold with filters designed for transmission of digital video data high resolution and multi-channel digital audio signals. It is used to connect to many new generation devices: television sets, multimedia players and other video devices that have the appropriate connector.

A distinctive feature is the presence ferrite filters, which increase the inductance of the section of the wire passing through it several hundred times, this ensures the suppression of high-frequency interference. ferrite rings on the cord are used as additional external filters, the presence of which guarantees compliance with all quality standards and allows you to achieve:

• high-definition (Full HD) video transmission with maximum resolution (1080p);
• support for the most popular 3D technology;
• support for extended color spaces, relevant for modern television equipment.

Dear buyer!!! If you do not want to bother looking for a remote control on our website, then you can send us a photo of the old remote control or a photo of the remote control from the instructions or the name of your device (usually the device model is written on the back cover, see the "SELECTING THE REMOTE" section).

Send a photo to Whatsapp, Viber, Telegramto the number 8-926-226-19-28 . We will pick up the remote control for you and contact you to place an order.

How to find the remote control you need on our website:

• To do this, you need to know the TV model or remote control model.
• The remote control number can be found on the remote control itself. It can be either on the front side or on the back of the case (often found with PANASONIC), or under the cover or on the battery cover (most often there is a number for PHILIPS). Some manufacturers do not write the number on the remote and in this case you need to watch the model only on the equipment itself (TV, dvd, etc.).
• The TV model can be viewed on the back wall (cover) of the TV. A sticker that says TV model is usually located in the center of the cover.
• Find out the model of the remote control or your device, enter all or part of this number in the search box. The search engine will give out remotes that match your request. If several remotes fell out, then you select the one that fully matches your model and is similar in appearance to your old remote.
• If you do not know the model of your remote control, and searching by hardware model did not help you, then you can find the remote control by appearance in the catalog (catalog of categories and brands).
• If you have any doubts about the choice of the remote control and want us to double-check the correctness of the selected remote control, then write us the model of your device in the comments to the order.
• If you did not find the remote control you need on our website, this does not mean that we cannot help you. Send us a photo of your old remote or your device model on email [email protected] yandex.ru You can also send us a question by feedback and our manager will contact you.

Original remote controls for TVs, video equipment, audio equipment

• Non-original remotes for TVs, video equipment, audio equipment
• Universal Remotes for TVs, video equipment, audio equipment
• Learning remotes for TVs, video equipment, audio equipment
• Programmable remote controls for TVs, video equipment, audio equipment

I can not change the ancient TV in the hall. Children are small, they can break. And the old box is not a pity.

So I decided to buy a set-top box for watching digital TV for an old TV, since there is not enough one in the house.

I took one of the cheapest, because specifications everyone has the same.

Inside was also a standard box:

There was a small remote control in the package:

In addition, there was an instruction with a very small print and a cable for connecting to a TV. tulips. HDMI cable the manufacturer clamped, but I did not need it.

There is another set-top box at home, so there were no problems with the settings. The set-top box caught all 20 channels, and with a homemade antenna from beer cans. Reception is stable, better than Rolsen's analogue. But the channels switch well, very slowly, you get tired of waiting. This is a big minus. Very annoying.

Otherwise, the device is working. Reads movies from a flash drive. Again, many films are buggy. On some there was no sound, on the other set-top box they went without problems. You can record your favorite programs, but I do not use this function. because everyone has the Internet, you can watch your favorite shows online, and not write to flash. In general, do not regret the extra 100 rubles, and buy something else.

Video review

setting up a digital TV receiver