It is one of the best in the world market. Thanks to their precise automation, life becomes convenient and comfortable, as well as safer. Came devices are available, there are no problems when installing on any gate, and there is no need to change them, which saves you a lot of money.
As for climatic conditions, it should be noted that manufacturers have approached this issue responsibly. The equipment perfectly withstands frost, wind, heat, dust, rain.
Consoles from CAME
TOP-432NA is the most popular. Due to the fact that it is two-channel, it is possible to control a separate device, for example, to open a barrier and a gate. Frequency 433.92 MHz. Manufactured using constant code technology. Size -32x68x13. Works at distances up to 150 meters.
Programming
1. It is necessary to set the distance no more than 5 mm from each other.
2. We press two buttons at the same time on the new remote control and hold them. The indicator flashes rapidly.
3. Release the button and click on the one that needs to be programmed. Now the indicator lights up steadily, does not blink.
4. We turn on the key on the old key fob quickly, with which the overwriting will be carried out. All this must be done while the light on the new remote control is on.
5. If everything is done correctly, then the indicator on the “clean” key fob will blink three times. This indicates that the recording was successful, that is, the code has been rewritten.
TOP-432SA - two-channel, works on two devices. Frequency 433.92 MHz.
copying
1. The distance between the key fobs should be no more than 5mm.
2. On the new one, press and hold the button on which the recording will be made until the indicator lights up with a steady light.
3. When the button on the new remote control is lit, then you need to press on the other one, from which the code will be overwritten.
4. The remote control should blink three times. Everything is done correctly.
TOP-434NA - Four-channel key fob with an operating frequency of 433.92 MHz.
Programming Came TOP-434NA
1. You need to press and hold two buttons simultaneously on the new key fob until the blinking changes.
2. The lamp burns steadily. You need to briefly press the button on which the code will be written.
3. While the indicator on the first is lit, it is necessary to quickly press the key on the second with which you want to rewrite the code.
4. There should be a three-fold flash on the new key fob, which indicates a successful result.
TOP-432EE - new model TOR series. It works in two coding systems TAM and TOP, which allows you to work with consoles at those objects where the TOP and TAM coding has been installed.
Programming with TOP-432NA
1. Preparation for programming. We press and hold the button on the first key fob transmitter that needs to be programmed until the indicator starts flashing. Release them on the new remote.
2. Click on the button. The indicator should light up without blinking.
3. Within ten seconds, you need to bring the key fob to the TOP-432NA, on which the light is on. Turn on the button on the master key fob once. The LED will blink three times and turn off to indicate that the copy has been successfully completed.
TOP-432EV is an improved model of the TOP series. Contains 4096 code operations. 32x69x11 mm - overall dimensions.
Copying keychain Came TOP-432EV with TOP-432NA
1. Press then hold the top two buttons on the key fob to be programmed until the indicator blinks rapidly. Now you need to release two buttons on the TOP-432NA remote control.
2. You need to press any key that you will program.
3. The light bulb should burn with a steady light.
4. Within ten seconds, bring the TOP-432EV key fob from below and behind to the TOP-432NA, where the indicator is lit, press the TOP-432NA operating button once. The remote device is ready for operation if the light blinks three times.
The remotes are new products from Came, which are designed to protect the radio control code, illegal copying by outsiders. Two-button and four-button are produced. Keychains with a dynamic code system.
Programming Came Twin remotes
1. It is necessary to have an already authorized key fob, which has already been entered into the system using the button of the receiver.
4. Within twenty seconds, press the button of the new key fob once.
5. We wait about twenty seconds until the radio comes out of the so-called programming mode.
6. New code entered. This procedure can be done with the following remote control. But it is very important: one radio receiver supports no more than 25 key fobs. Also turn off those receivers that are close, in which you do not need to enter a new code.
Came TCH-4024 and TCH-4048 are four and eight channel 40 MHz transmitters. Touch is a new generation sensor that allows you to control multiple objects. There is protection against accidental keystrokes.
Copying Came Touch Remotes
1. Press and hold the top two buttons at the same time until the indicator flashes faster.
2. Press the button you want to activate. The indicator will light up steadily.
3. Bring the working key fob from behind to the new one for ten seconds and press the (working) button, hold for a few seconds.
4. The indicator should blink three times if everything is done without errors.
Came and - two-channel and four-channel with a dynamic code. Atomo is a handy, sleek remote that guarantees great customer experience. Ensures the reliability of the outgoing signal.
Programming remotes Came Atomo
1. Select a zone of excellent reception, no further than five meters.
2. On a working key fob, press and hold the button until the indicator lights up steadily for fifteen seconds.
3. On the new device, hold the button once for about twenty seconds.
4. We wait fifteen seconds and check the operation of the new key fob.
Nice
Engaged in the production of automated systems for gates, barriers and doors. This Italian company occupies a leading position in the world of automation. Nice products are reliable, high-quality, time-tested.
The ability to manage all processes (close the gate, open the blinds) with one remote control without leaving home.
Nice FLO 1, FLO 2, FLO 4 - rolling code remote control. Frequency 433.92 MHz. Response range up to 150 meters. Dimensions 72x40x15. They produce single-channel, two-channel, four-channel.
Consoles Nice FLOR 1S, FLOR 2S, FLOR 4S. Single-channel, two-channel, four-channel models are produced. The range is 150-200 meters.
Programming Nice FLO, FLOR
1. There must be a receiver nearby.
2. Consoles must be arranged in series.
3. Press any button on the new one and hold for about five seconds.
4. Press the button on the old remote control three times.
5. Now on the new one, press once the button that was already pressed first and release.
Nice ON 1, ON 2, ON 4, ON 9 - rolling code remotes. Sleek look, small size. Works in all weather conditions. There is a special ring for fastening on keys. Control frequency 433 MHz.
Programming Nice ON remotes
1. The two remotes must touch at the top.
2. Press any button on the new keychain and hold until the light on the old one lights up. We release the key, and the indicator on the second should flash.
3. Press any button on the old key fob, hold the button on the new one until the indicator lights up.
4. Release the button on the old key fob. The indicator on the new one went out - this is a successful programming.
Nice Very VE is a two-channel remote control with a statistic code.
Programming Nice Very VE
1. Press the two buttons at the same time until the light stays on.
2. Press the top key if the first switch on the receiver is in the “On” position. Press the bottom button if the microswitch is in the “Off” position.
3. Item number 2 is repeated for all ten microswitches that are located on the receiver.
4. The LED will blink rapidly if the tenth switch is turned on. While it is flashing, if the buttons are not pressed, then the code will be stored in memory.
Nice Very VR is a two-channel floating code keychain. Frequency 433.92 MHz.
Nice Veri VR programming
1. There must be a remote control that is already recorded in the receiver. The first one is always written to the floating code receiver using the receiver button.
2. Within five minutes, we transmit the code by holding the key of the new remote control.
3. Press the button of the old device three times
4. Briefly press the button of the new remote control. All recording completed.
Hormann - time-tested quality
German products. Reliability, convenience, beautiful design.
This manufacturer produces remotes with the same design, but with different radio frequencies. They differ in the color of the buttons: blue (868 MHz), green (26.975 MHz), gray (40 MHz).
Hormann HSM 4 is a four-channel remote control for gates and barriers. Overall size 37x110x13. Frequency 868 MHz. dynamic code.
Programming the HSM 4
1. Place "head to head" trinkets.
2. Press the button on the old remote control and hold. The lamp should be on constantly.
3. Press and hold the programming key on the new remote control. The indicator will first flash slowly for about four seconds, and then flash faster after successful completion.
Remote control HSE2 - two-button. Key ring. Frequency 868 MHz.
Hormann HSM at 40.680 MHz. Two-button and four-button.
Programming Hormann HSM 40 MHz
1. Arrange new remote next to the old one.
2. Press the button of the old remote control and hold.
3. Press the appropriate button on the new remote control. The LED should flash four times.
4. Release the buttons.
HSP4-C – remote control for gates and barriers. New design. Beautiful appearance. Frequency 868 MHz. Dimensions - 48x48x13 mm. The number of buttons is four.
Copying the HSP4-C
1. Place the key rings next to each other.
2. Press the key of the transmitter that inherits the code and hold it for five seconds. The indicator should be on constantly.
3. Then we press the button that needs to be programmed on the new key fob, hold it down. For about four seconds, the light will flash slowly, but after the task is successfully completed, it will flash faster.
4. Release the keys on both remotes.
doorhan
Doorhan is a major Russian supplier of automation for gates, remotes, and radios. Focuses on the global market.
Doorhan Transmitter 2, Transmitter 4 are rolling code remotes. Operating frequency 433 MHz. Intended for remote control two and four Doorhan automatic devices, as well as to any other automation with an existing Doorhan radio receiver. One key fob can control two (four) gates, barriers.
Programming Doorhan remotes with DHRE-2 receiver
1. We clean the memory from old codes. After turning on the power, hold down the record button of the remote control for about 10 seconds. The indicator will blink for 10 seconds, then turn off, then blink twice. All old codes have been removed.
2. To record the remote control code, press and hold the “SW1” key on the receiver board for 3 seconds. Then press the button on the remote control for 2-3 seconds.
3. If you need to configure other remotes, then the code is repeated.
You can program a specific control channel with each key.
BFT products guarantee quality and reliability
ВFT -12, ВFT -12 - two-channel, four-channel consoles. Frequency 433.92 MHz.
Programming BFT remotes
1. Press the "OK" button. A welcome message will appear.
2. Click the "OK" button. We see the first section of the "PARAMETER" menu.
3. Now press the “-” key several times, the “RADIO” menu appears.
4. Press "OK" again and see that the menu section for adding key fobs to the radio receiver's memory "AD start" appears.
To add key fobs:
1. Press the "OK" button - the inscription "hidden button" appears.
2. Press the two buttons on the key fob that need to be recorded.
3. A "release" will appear, followed by a "desired button".
4. Press the remote control button.
5. "OK 1" will appear. Everything went well.
6. To record other key fobs, we will do everything by analogy.
7. After all the remotes have been recorded, press the buttons twice<+>and<->simultaneously.
Faac is a recognized market leader in the production of automatic barriers, gates
The Italian company is known not only in Europe, but throughout the world.
XT2-868 SLH, XT4-868 SLH - two-channel and four-channel remote control for gates and barriers with 868.35 MHz frequency. Operates at temperatures from -20 to +55 C. Radius up to 50 meters.
FAAC DL2 868 SLH, FAAC DL4 868 SLH - obsolete models, discontinued. Two-channel and four-channel. New remotes of the XT series completely replace the previous ones. They differ only in stylish design, improved performance.
Programming the XT2-868 SLH and XT4-868 SLH Series FAAC Remotes
You need a master key fob, that is, the one that was recorded first (master), as well as a new remote control (slave).
1. Press the P1 and P2 buttons on the old device for two seconds at once. The LED blinked, then you can start programming, as he saw this device.
3. The indicator is on constantly. We press the key on the old remote control, which should be overwritten.
4. Press the programming button on the slave remote control. Release the button after the light flashes twice.
5. All copying is completed. Actions can be done on all other buttons and other remotes.
In conclusion, I would like to say that now in our time the system automatic control installed on all types of barriers, gates, doors. You can control it using a separate remote control, which greatly increases the level of security, especially against theft.
Using the automatic remote control is a pleasure. The main thing is that you can always carry it with you on a bunch of keys. You can also, for example, in bad weather, without leaving your home, use it. Everything can be selected and installed at the request of the client.
Consider the option of copying the remote control using the simplest remote control - duplicator(Apollo, D1, Joy, Deff DP-1 and their analogues). As a rule, such duplicators can copy any fixed code at a frequency of 433.92 MHz and partially dynamic.
To copy remotes with rolling code, you need to use the SDBL-7 Smart Duplicator.
Let's imagine a situation where you have a CAME VER-900 series ceiling drive installed in your garage. You open and close the gate using the original Came TOP 432 NA remote control operating at a frequency of 433 MHz. Over time, the rubber buttons of this key fob crack and become unusable. It is extremely inconvenient to use such a remote control. How to be in this situation?
Everything is very simple! You need to purchase a remote duplicator that will allow you to make a copy of your "dying" remote. The copying procedure is quite simple, which can be handled by anyone, without any technical knowledge.
So, let's look at the instructions step by step.
1) First we need to enter the remote into programming mode.
To do this, on the duplicator remote control, simultaneously hold down buttons A and B for 3 seconds. As soon as the LED starts blinking slowly, release buttons A and B at the same time.
2) Now our Duplicator is in programming mode, you can start copying.
3) Copying the remote control.
Now the most difficult step, where the main mistake is most often made. Let's talk about this in more detail, how to prevent it.
The surest way to copy is "back to back", in this position the code is read as clearly as possible. The Internet is full of video programming instructions, where they try to copy the remote control from a distance. We strongly do not recommend doing so.
So, it is better to turn the original remote control over so that the buttons look down, and put the duplicator remote control with your back on it, with the buttons up. In this position, you will see how the copying takes place. Simultaneously press the "working" button of the original remote control and the button (for example A) of the duplicator remote control. Observe the LED indication. As soon as the remote duplicator sees the code of the original CAME Top 432 NA, it will blink rapidly. It is necessary to wait 2 seconds until the LED flashes quickly, then release both buttons.
To record the remaining buttons (BCD), we repeat the copying procedure similar to button A, only without entering the programming mode.
Please note that entering the remote into the "programming mode" is done only once.
If for some reason after programming the remote does not open, repeat the copying process from step 1. This sometimes happens when the code is transmitted incorrectly.
4) Return to factory settings.
To return to the factory settings, you must simultaneously hold down the buttons A and C. This function can be useful if you put a universal receiver on which you want to record this remote control. But after entering the remote control into the programming mode, the buttons become inactive, any code is erased on them. A factory reset will restore the factory code on each of the 4 buttons.
Video instruction on how to copy the CAME Top 432NA remote control using the remote duplicator (DP-1).
Video instruction on how to copy the An Motors AT-4 remote control (Alutech) using the SDBL-7 remote control.
Video instruction on how to copy the Doorhan remote control (R3V3 Remote Identification) using the SDBL-7 remote control.
What remotes can be copied with the SDBL-7 universal remote control duplicator?
To copy the dynamic code of the remote control, you need to use the SDBL-7 Smart Duplicator, which will automatically recognize the type of code and copy the original remote control.
Automation is a modern direction in production, very often devices are used almost daily. The list of frequently used devices can also be replenished with gate remotes. In order for it to work properly, it is important to be able to properly configure it, and also, if necessary, carry out such a procedure as programming. Before you program the device from the gate, you need to study some recommendations of the feature. Thanks to this, you can do all the work yourself, without using the help of specialists, which makes it possible to significantly save time. Products of this kind are produced by many companies in different countries but there are a few worth noting. They are very popular, taking first place in the ranking of the best.
Gate remote control manufacturers
Among the most popular manufacturers of automation in the modern market, there are several companies:
- CAME;
- nice;
- Hormann;
- BFT;
- FAAC.
Every manufacturer uses modern technologies, because of which there may be some similarities in the work of the offered goods, but still there are more differences.
Consoles from CAME
An Italian company that occupies a leading position in the global market. They produce a lot of automation products, they facilitate the daily worries of a person. Each product is characterized by high quality, precision work. Remotes, as well as locks of the company are affordable, and can also be used in any climatic conditions. Performing all installation work requires a minimum set of skills, the main thing is strict adherence to the instructions. Any key fob has distinctive characteristics when programming. Before carrying out work, it is worth reading the instructions attached to the product.
Remote control - model Came TOP-432NA
The most popular model among a huge number of people. Such popularity is due to the fact that it is two-channel, which makes it possible to control a separate device to open a barrier, a gate. The product is manufactured using the constant code technology. They are distinguished by small sizes - 32 * 68 * 13. It is possible to perform tasks up to 150 meters. Programming takes place in the following sequence:
- The working device together with the new one must be placed at a distance of about 5 mm from each other.
- On the new key fob, you must simultaneously press two buttons, hold them until the indicator starts flashing quickly.
- Release both buttons, then press the one you want to program. In this case, the indicator should burn steadily.
- On the old remote control, you need to quickly click the key with which the reinstallation will take place. This manipulation is carried out until the new device starts to glow.
- If everything is done correctly, the indicator of the new device will blink three times. If this is not the case, it is worth repeating everything from the beginning.
Nice console
The company specializes in the production of automated systems specifically for gates, barriers, doors. The Italian company also occupies a leading position in the world market. The products are of high quality, reliability and durability. One device can actually perform several tasks while staying at home.
Key fob programming for Nice FLO, FLOR automatic gates
The series of devices is characterized by a dynamic code with a frequency of 433.92 MHz. It is possible to perform manipulations at a distance of up to 150 meters. products are relatively small. The line is represented by several variations of one-, two-, three-channel models. Programming is carried out according to the following scheme:
- First, receivers are located nearby;
- All units must be placed in sequence
- It is necessary to hold one of the keys for about 5 seconds.
- The button of the old device must be clicked three times.
- Next, you need to press the button of the new device, which was previously held once.
Hörmann automatic gate keychains
German quality, time-tested. The company's products are of excellent quality, as well as attractive design. The design is made in one direction, the product differs only by different radio frequencies. Differences can also be seen visually. The model equipped with blue keys is characterized by a frequency of 868 MHz, green - 29.975 MHz, gray - 40 MHz.
Keychains Hormann HSM 4
In private use, the Hormann HSM 4 model is very popular. It performs four-channel remote control of gates and barriers. Overall dimensions of the product 37*110*13, radio frequency 868 MHz. Has dynamic code.
key fob programming for automatic gate:
- First, 2 devices are placed, old-new head-to-head.
- Hold the key of the old key fob. The indicator should glow constantly.
- Hold the programming key of the new one. At first, the indicator lamp should flash slowly, and if the programming is successful, after 4 seconds it will flash quickly.
Keychain Doorhan
The largest Russian supplier of automation for gates, radios. Doorhan Transmitter 2, Transmitter 4 - a feature of these key fobs is also a dynamic code. They are designed to control two or four automatic devices. They can also be used for any other equipment that is equipped with a company radio. Reprogramming involves the following actions:
- To reprogram the device, you must first clear the memory of old codes. Turning it on, you need to press the record key and hold it for 10 seconds. If everything turned out to be done correctly, the indicator will flash for 10 seconds, after which it will go out, then it will flash 2 times. So all the old codes have been removed.
- To prescribe required code it is necessary to press and hold the SW1 button on the receiver board itself for 3 seconds. Then it is worth holding the device button for 2-3 seconds.
- Such manipulations should be carried out for each key, reflashing the control code for a specific device.
BFT Keyfobs - Product Features
BFT Mitto 2-12, BFT Mitto 4-12 - respectively two- and four-channel consoles. The frequency of products is 433.92 MHz. Programming the product is quite easy, you just need to perform a few manipulations:
- Press the "OK" button, after which a welcome message will appear.
- Press the button again, after which the “PARAMETER” menu should appear.
- Then press the “-” button several times. The “RADIO” menu should appear.
- Press the "OK" button again, after that the next menu section appears - adding key fobs to the radio receiver's memory "AD start".
To encode key fobs, you must sequentially perform the following manipulations:
- Click the "OK" button, the message "hidden button" should appear.
- Then you need to press two buttons on the key fob that you want to encode.
- The inscription "release" should appear first, and then the "desired button".
- Press one key.
- “Ok 1” should appear, indicating that everything went well.
- To encode other key fobs, the work must be repeated according to this scheme.
- After completing all the manipulations, you must simultaneously press the plus - minus 2 times.
Faac is the recognized leader in gate remote controls.
The Italian firm Faac is recognized all over Europe as well as all over the world. Some time ago, XT2-868 SLH, XT4-868 SLH devices were very popular. Two or four-channel devices worked up to 50 meters. Performance did not deteriorate at temperatures from -20 to +55 degrees. With their help, it is possible to remotely control gates or barriers. Frequency 868.35 MHz. But they have already been taken out of production, they were replaced by new models of the XT series. They differ more modern design as well as improved performance. Transcoding of remotes can be carried out only if there is a master key fob, the one that was recorded first, as well as a key fob where the recording will be made.
- On the old remote, you need to simultaneously press the buttons P1 - P2 for two seconds. Only if the LED flashes can programming continue.
- Keyrings must be placed strictly opposite each other.
- The indicator should be constantly on. On the old remote, you need to click the button that should be overwritten.
- The programming key for the new remote control. Release only if the indicator flashes 2 times.
- Encoding is successful.
AT modern world There are many devices that allow people to more comfortably perform work. A universal keychain will allow you to open the gate or barrier for exit without leaving your home, which is convenient especially in bad weather conditions, as well as to save time. Many manufacturers offer great amount variety of options. This will allow everyone to choose the most suitable option for a particular case.
All work on programming the device can be done independently, but if any difficulties arise, you should contact special service companies or service centers. Experts will help to eliminate all malfunctions, to establish work. Also, you should go to the specialists if the remote control starts to work poorly or does not execute the program. You can not disassemble it yourself, this can lead to more significant damage.
Unfortunately, programming remote controls (RC) for gates is not always carried out using the same methods. The programming algorithm may vary and depends on the manufacturer. First you need to register the remote control on the receiver control board.
Many manufacturers use the copy code method. For example, to set up Faac and Nice one remote control needs to be written to the receiver. The rest of the remotes are programmed by copying from the first key fob. Recording subsequent remotes may disable all others. This method is quite convenient, because does not require permanent recording of each gate control panel separately.
However, the safety of such a system is questionable. Imagine a situation where your gate control panel fell into the hands of another person for a while. It will take an attacker no more than a minute to copy the signal to his own. This needs to be thought about first. Thus, it becomes clear that the use of such a system for organizations and companies is not the best idea. Signal copying will get out of control.
Systems are an alternative GANT and . The essence of such systems is the recording of each remote control in the receiver using unique signals. But it is worth noting that such systems have limitations on the number of recorded devices. These systems are considered more secure because it is impossible to copy the signal so easily. For businesses, this is the best option.
Do not forget to erase the old data from the receiver before recording new remote controls. As a rule, deleting all records is done by holding the button on the receiver for 10-15 seconds.
Now let's look at programming in more detail.
- To begin, press the "Learn" button on the drive control unit. After a second, the LED should light up at this inscription;
- Then, by pressing the button on the key fob, you will see how the LED blinks and goes out.
Congratulations, you saved the signal! Follow the same procedure for other remotes if necessary. This chip can record up to 100 remotes, however, its memory is limited. If you need to remove key fobs, hold down the "Learn" button for no more than 10 seconds.
Came
- On the control unit there is a "Prog" key. Hold the key until the indicator flashes;
- Next, press the key on the key fob. Restoring even light means successful recording.
Unlike the "Professional" system, subsequent key fobs are recorded in a different way. Let's make a copy.
- We clamp two buttons on the new remote control. At the same time, the LED will start flashing;
- Next, release the keys and press the one we need to program;
- After the LED signal, we bring the programmed key fob to the second one and press the working key. The indicator should blink 4 times.
Duplicate remote control from the Came gate is ready.
To record other devices, repeat the action.
Faac
- To record, you need to hold down the "P1" and "P2" keys. We release them only after the indicator on the key fob lights up.
- Then the receiver board button is pressed until the LED signal appears.
- In the process of blinking the indicator on the remote control, press the button that will control the gate leaves. After 3 seconds, release the buttons of the receiver and remote control.
Signal recorded!
In the Faac system, copying is also used, as in the previous Came system.
- On the programmed key fob, hold down the "P1" and "P2" buttons.
- Release the buttons after the LED signal.
- Both key fobs are located opposite each other.
- Next, you should hold down the button on the main key fob, from which the signal will be rewritten. After the code is saved, the indicator will blink 2 times.
- For all other devices, the operation will be repeated.
- Hold down the button on the receiver for 3 seconds. The indicator "Led1" will light up, i.e. recording started.
- The remote control button is also held for at least 3 seconds.
- The rest are programmed in the same way.
Nice
Firm Nice works in 2 directions - key fobs with a dynamic code and with a permanent code. They differ in body color. Blue is permanent, black is dynamic.
"Nice" with a permanent code are programmed using 2-way switches. They are present both on the key fob and on the receiver. These old-fashioned devices are rare these days. To prepare another key fob, the main, already programmed remote control, you need to unwind and set the switches to exactly the same position. This system implies copying, so we will consider this procedure in more detail.
- To get started, it should be noted that both key fobs must be within the radius of the receiver;
- Hold down the desired button new remote control for 5 seconds;
- Button main The remote control is pressed 3 times (short presses).
Everything. The signal is programmed.
To format the receiver's memory, hold the button until it blinks 3 times. Release the button after the third blink. If the LED flashes five times, then everything worked out.
Universal gate remote control
Currently, you can buy a special universal programmable remote control that can be adjusted to a maximum of 4 frequencies and is suitable for 4 different automatic gates at once (, up-and-over or sliding). We think it is not necessary to explain why it is convenient. The cost of such devices is about 700 rubles.
Finally, watch the video instruction on programming a new remote control for Nice automatic sliding gates from the old one:
In order to facilitate the process of controlling gates and barriers, radio remote controls are used. Recently, they have become especially popular due to their compact size, ease of operation. That is why services such as clone and duplicate gate remote control programming are so popular. This is necessary if you bought a new remote control or want to reconfigure the range of the old one.
It should be noted that self settings new remote control are not always successful, for example, two channels are mistakenly tuned instead of one. From this comes the question of how to program the second key fob from the gate, clone, register and recode or flash the key fob from the gate?
How to reset the gate remote control and reset the settings?
You can call us by phone and our engineer will professionally advise you and offer his assistance.
Why is it beneficial to use a radio remote control?
- this is convenient, especially for large areas with many fences;
- saves time if the gate or barrier needs to be opened many times;
- Compact design allows you to carry the thing with you everywhere.
What are radio remote controls?
Today there are two types:
- Radio remotes with one fixed code - it is quite easy to program, but not very safe at the risk of intercepting the signal.
- Remote control with multiple signals. The codes of such a key fob can be changed, this ensures security. Depending on the model, key fobs can support up to several million combinations of codes.
- With "Jumping Code".
- There are also gate cards.
Our service center performs programming of key fobs of various models and configurations, as well as reprogramming gate keys and we can remove the code from the gate key. We are also pleased to offer a universal Jolly Open model, which has no analogues. This remote transmitter can copy multiple original remotes with different codes, is reliable and easy to tune to many channels. Jolly Open has a metal casing and keeps programs running even when the battery is low. Also pay attention to the Apollo-C remote control, which is able to replace 4 automatic remotes operating at different frequencies.
JollyOpen is compatible with and can replace the following remotes:
- CAME : TOP 432 , TOP 434 , TAM 432 , TWIN 2
- Beninca To.Go2
- Nice - FLO series (FLO1, FLO2, FLO4), Very VE
- Apollo-C
- Ditec GOL4C
- Dea MITTO 2
- Roger R80/TX12
- Marantec D212
- Dea 623
- Gate-TX
- Altonika
|
Remote control delivery without programming |
300 rubles (from 5 pcs. free shipping in St. Petersburg) |
|
Delivery with programming from remote to remote |
1000 rubles |
|
Delivery with programming via the automation radio channel (requires access to the gate or barrier control unit) |
from 1500 rubles |
|
Installation, replacement or connection in parallel (to expand the number of remote controls) of the automation radio channel |
from 3000 rubles (the price includes only work without the cost of equipment) |
Catalog with remotes, prices and how to set them up, see the next section>>> Gate remotes.
Contacts
Robust plastic housing
- high range
- 12V battery included
- light indication
- 12V battery included
- size 40x63x17mm
Encoding:
Press the button on the new key fob for 2 seconds.
Two-channel remote control MITTO 2-12 for CLONIX receiver
_____________________________________________________________________________
Beninka TO.GO4WV- four-channel key fob.
Dynamic code, 433.92 MHz.
Designed to control automation, with a BENINCA radio receiver.
Programming:
Press a hidden button on a working key fob with a paper clip
Press the button on the working key fob
Press the button on the new key fob for 2 seconds
Two-channel remote control MITTO 4-12 for CLONIX receiver
Keychain with dynamic code CAME ATOMO, 433.92MHz for gates and barriers.
To program a duplicate key fob:
- Position yourself in an area with good reception, no further than 5 meters from the radio.
- On a working key fob, press the button and hold it until the indicator starts to burn steadily (about 15 seconds).
- Within 20 seconds, press and hold the button on the new key fob once.
- Wait 20 seconds for the radio to exit programming mode. Check the operation of the new key fob.
__________________________________________________________________________________
The 433.92 MHz radio series is specifically designed to meet today's standards for automatic remote control. In the TOP - NA version, multi-code technology is implemented, that is, the ability to use an individual code on each of the buttons of each radio remote control.
Keychain Copy:
- Press both buttons at the same time and hold until the indicator flashes faster.
- Press the button to be programmed (the indicator lights up steadily).
- Within 10 seconds, bring the working key fob from below and behind to the new one and press the button on the working key fob for a few seconds.
After writing the code, the indicator should flash three times, the key fob is ready for operation.
____________________________________________________________________________________
Transmitter 4 doorhan
Advantages:
- ergonomic design;
- 4 independent channels.
Remote controls Transmitter D2 designed for remote control of DoorHan automation or any other device to which the DoorHan radio receiver is connected. One remote control can control four gates (barriers or other automatic devices).
Advantages:
- ergonomic design;
- KeeLoq signal floating code algorithm;
- 16 million combinations of floating code;
- 4 independent channels.
Compatible with all previous versions key fobs DoorHan.
________________________________________________________________________________
keyrings Ecostar Rse2 supplied by Hormann for Ecostar operators with Hormann gates. The memory of the receiver is designed for 6 key fobs. Programming a new key fob:
- Briefly press the small transparent "P" button located on the actuator cover or the "P" key on the receiver. The red LED light starts flashing, signaling that the system is ready to program the desired key fob key.
- Press the key fob key and hold it until the red LED starts flashing quickly.
- Release the key.
- Within the next 15 seconds, press the keyfob key again and hold it until the LED starts flashing very quickly. Then release the key again.
- The end of a very fast flashing indicates successful programming of the selected key fob button. The LED light is on without blinking.
After programming the key fob and expanding the radio system, it is necessary to carry out a functional test.
Complete erasing of the radio receiver's memory:
Press and hold the "P" button for more than 5 seconds.
All remotes are erased; it is impossible to erase one or several separately.
___________________________________________________________________________________
FAAC Remote Controls TX2/4
Designed to control automation by FAAC or any other manufacturer when an external FAAC receiver is connected. A two-channel remote control (TX2) allows you to control two devices, a four-channel remote control (TX4) - four. They have the function of copying the code from one remote control to another - to add new ones to the system, there is no need to access the receiver. Each button can be programmed.
The TX2/4 consoles operate in two modes: Master and Slave. The master console can be used to write its own code to the radio receiver (minidec) of the control unit, as well as to transfer its code to other Master consoles or Slaves.
In addition, in the Master console it is possible to replace your own code with a new one (it is generated automatically by the console).
The slave remote control, unlike the master, cannot be used to program other remote controls, to write its code to the radio receiver (minidec) of the control unit, and its code cannot be changed without using the Mastera.
The key fob FAAC DL2-868SLH has been discontinued. Replacement: new key fobs FAAC XT4-868SLH. They differ only in design and improved characteristics.
Hand-held push-button transmitters (remotes) are available in two and four-channel versions.
___________________________________________________________________________________
_________________________________________________________________________________
Single channel keychain Intro II 8501-1 to control roller shutters, gates, barriers, lighting fixtures in step by step mode("open" - "stop" - "close"). Miniature. Ideal for managing a single object. Energy-saving mode - disable signal transmission when the button is held for more than 16 seconds. Used with receivers: Intro II 8513-50, Nero II 8713-50, Intro II 8513UP.
Programming order:
1. Enter the receiver into the programming mode, to do this, press and hold the receiver's programming button for more than 4 seconds.
2. Enter the key fob into the programming mode, to do this, press the key fob button three times in a row in two seconds, press and hold for the fourth time until the LED starts to flicker, then release it.
3. Write the code into the receiver, to do this, briefly press the key fob button.
4. Take the receiver out of programming mode by briefly pressing the receiver's programming button twice.
2 and 4-channel key fob for controlling roller shutters, roller blinds, sunshades, lighting and other electrical loads in conjunction with receivers of the Intro II series.
1, 2 and 4-channel key fob for controlling roller shutters, roller blinds, sunshades, lighting and other electrical loads in conjunction with Radio series receivers.
Peculiarities:
- connection of a safety sensor (photocells);
- connecting an external switch or button;
- connection to the control unit of the barrier, swing, sliding and sectional gates;
- the ability to program 30 (1000 for Radio 8113 IP 65-1000) transmitters (remotes) of the Radio series into the device's memory; 4 operating modes:
- a short command (the time of power supply to the electric drive is 1.5 sec.), which is most often used for joint work with other automation devices;
- roller shutter mode (the time of voltage supply to the electric drive is set from 0.2 to 180 seconds), used to raise and lower roller shutters;
- louvered mode (the time of voltage supply to the electric drive is set from 0.2 to 180 sec.), used to raise / lower and turn the slats of horizontal blinds;
- continuous command (voltage is applied to the electric drive until the “STOP” command is executed), used to turn on / off lighting, other electrical loads
Keychain for controlling roller shutters, roller blinds, sunshades, lighting, etc.
4-channel.
The keyring has been discontinued. If additional Nero Sketch keyfobs are required, an additional radio module must be installed.