Samsung is known all over the world not only mobile devices, but also high-quality peripheral equipment. MFP Samsung Express M2070- one of the top products on the market, which is a real workhorse both in the office and at home. The only significant drawback of this device is its cartridge, the cost of which is equal to the price of a new printer. However, the MLT-D111S cartridge can be easily refilled.
Attention! Do not risk the performance of printing devices, refill the cartridge MLT-D111S for Xpress M2020 / M2070 printers total
Moreover, advanced users will be able to independently carry out the refueling procedure, performing the necessary actions in step by step mode. For this, consider good example in which we have prepared cartridge MLT-D111S- compatible with printers Samsung SL-M2070 / M2071 / M2020 / M2021 / M2022.
List of necessary tools for refueling MLT-D111S
Each cartridge refill Samsung MLT-D111S begins with the preparation of the workplace. To do this, we need some tool:
- cleaning blade;
- New chip and compatible analog toner;
- Conductive lubricant and powder to lubricate the drum unit;
- Compact vacuum cleaner with nozzles;
- Miniature screwdrivers (flat and Phillips);
- Pliers and chisel;
- Electric drill and drill 29 mm.
Step-by-step instructions for refilling the Samsung MLT-D111S cartridge
Before the procedure at the workplace, we spread newspapers or oilcloth, prepare essential tool and let's get started:
Stage #1: we place the MLT-D111S cartridge with the handle away from us, after which, with gentle movements of the chisel or chisel, we cut off the three rivets that are on the chipped side.
Stage #2: remove the end panel, which visually seems solid, but it is composite, so be careful not to damage it.
Stage #3: on the other side of the cartridge panel, cut off four rivets in the same way, after which we slowly remove the end panel, which also consists of several elements.
Stage #4: proceed to the removal of the hopper with the old toner. To do this, take out the axis of the photoconductor from the side where there is a hub. We remove the photoconductor and make sure that its fragile holders remain in place.
Stage number 5: now remove the blade to clean the hopper, then take out the large gear and clean the used toner from the drum unit so that the seal of the blade itself does not get dirty.
Stage #6: install the two screws and the cleaning blade in the reverse order, after that we clean the charging roller and install it again in the cartridge so that the guide elements are in the desired position.
Stage #7: we insert the drum unit first from the side where the hub is located, and then we advance its axis through the gears and the toner cartridge panel. We mount the drive gear and put the prepared part of the consumable aside.
Stage #8: remove three gears from the second half of the MLT-D111S cartridge and put them aside, after which we remove the developing roller gear by pressing on a small tongue.
Stage #9: unscrew the screw and remove the inner panel, and then remove the developing shaft itself, lifting it from the side where the sleeve is located.
Stage #10: remove two screws and remove the squeegee. This will allow the remaining toner to be cleaned through the developer roller opening.
Stage number 11: we clean the felt seals and the feed roller from the old consumable.
Stage #12: Now we have to fill the Samsung MLT-D111S cartridge with a compatible toner analogue, which must be slowly poured into the hopper.
Stage #13: we clean the dosing blade and then install it, fixing it with two screws.
Stage #14: install the developing roller and the inner panel, after which we proceed to the installation of four gears.
Stage #15: We connect both halves of the cartridge, while making sure that all the springs are installed in the correct places.
Stage #16: we put the cartridge panels that block access to the gears ( top panel install first).
Stage #17: we take a drill and drill holes in those places where the factory rivets were, after which we tighten the screws. We change the old chip, while making sure that it is correctly installed in the socket. Install sidebar and also drill three holes in it, in which we tighten the screws.
Stage #18: put the cover of the photoconductor itself. This means that the refilling of the Samsung MLT-D111S cartridge is over.
This toner replacement algorithm can be used as experienced user office equipment, and a beginner, but at the same time, you need to remember about the responsibility that will fall on your shoulders. If for the first time you decide to do all the steps yourself, then please carefully follow each step, because due to excessive self-activity, refilling the Samsung MLT-D111S cartridge can turn into an expensive repair for your printer.
Characteristics
Printer manufacturer: Samsung
Refilling Samsung MLT-D111S Cartridge
Black color
Resource: 1500 pages
The cartridge is used in printing devices:
Printers:
- Samsung Xpress M2020W
- Samsung Xpress M2020
- Samsung Xpress M2022
- Samsung Xpress M2022W
Multifunction devices (printer/copier/scanner):
- Samsung Xpress M2022W
- Samsung Xpress M2070
- Samsung Xpress M2070W
- Samsung Xpress M2070FW
An urgent departure is possible, within two hours the mechanic will be with you and your printer will be back in operation!
Where to fill mlt-d111s?
A resource of 1500 pages is maximum amount prints that can be produced by using consumable. The resource is indicated in A4 format pages at a certain percentage of filling them with toner, usually 5%.
Refueling MLT-d111S, warranty!
We give a quality guarantee - after our refueling, the cartridge will print no less copies than the original one! Refueling can be done by our master at the address of the call, or we can pick them up and deliver them to you by courier the next day.
The main feature, when working with this cartridge, is the condition of mandatory flashing of the printer itself. But this process is easily compensated by the fact that almost all printer devices that work with the Samsung MLT-D111S cartridge are absolutely reliable and technologically easy to use.
A generation of printers using the Samsung MLT-D111S cartridge are innovative devices. The consumer in the modern market, no doubt, is interested in the question of the quality with which the technique carries out duplicating copying.
But no less, and sometimes even greater interest in the client is the question of the efficiency of the technology used by him. Printers using Samsung MLT-D111S cartridges are characterized by innovations that work in the economy plane.
With the introduction of economy modes, there is no question of reducing the actual quality of copying. Samsung engineers and technologists have developed a technology that has led to a revolution in the field of documentary copying. All printer devices that use Samsung MLT-D111S cartridges provide the specialist working with them with the opportunity to preview the document to be copied before printing.
Before copying a document, the client has the opportunity not only to view the sample intended for duplication, but also directly influence the quality of the duplicating print itself. It is also possible to remove errors or elements that have lost their vital relevance Separately, the function for choosing the print mode with maximum savings and much more is considered.
Currently relevant are the services on which the functioning of systems or entire working complexes depends. In particular, this applies to refilling cartridges (inkjet and laser, color and monochrome), thanks to which high-quality and full-fledged work of printers and business development is possible. Therefore, the provision of this service is the main activity of many companies. And this article will help you find out how the process of refilling cartridges for different models printers for Samsung models.
Filling procedure
Each refill of a Samsung cartridge is a procedure to increase the working life of a consumable item. And in order for the workflow to take place without compromising the quality of printed images, you need to purchase only high-quality toner (powder) for refilling, and also strictly follow the technological instructions. In addition, when refilling cartridges, if such a procedure is performed in service centers, specialists carry out inspection and diagnostics of working parts, the condition of which depends on the functioning of the cartridge and printer as a whole. Moreover, provided by the specialists of the companies, the main field of activity is the refilling of cartridges for any models of devices, which is capable of shedding the operational life of the equipment. Therefore, many users of printers prefer self-refueling services provided by professionals.
Refilling a cartridge that is equipped with a CHIP that requires replacement or flashing of the CHIP. In this case this service allows you to use the maximum possible resource of a consumable element without the need to purchase an original cartridge.
flashing
Replacing the chip installed by the Samsung manufacturer to control printing and the amount of toner used is the introduction of updated adjustments to the firmware of the printer or MFP that ensures the operation of the machine, provided that the starter (original) cartridge is used. Usually, the starter cartridge is included in the purchased equipment, and after some time (after a certain number of prints issued) it stops working. Usually the situation is as follows: after 2000-6000 pages printed. (this number is set by the manufacturer individually for each specific model Samsung), the printer is blocked and printing on it stops until the used consumable item is replaced with a new, original one with a CHIP.
In order to remove the blockage and at the same time avoid buying an expensive original cartridge, the user of the printer Samsung devices can contact a specialized company, which will not only refill the cartridge, but also install an update for normal functioning equipment.
How monochrome cartridges are refilled
Offices often use high-performance printers and MFP Samsung, allowing monthly working groups to receive large norms of high-quality printed products. Therefore, the use of laser monochrome (Samsung Xpress M2020, Xpress M2070/2070W, SCX 3400/4200, etc.) and color (Samsung CLX3305) lasers are quite common. Therefore, the service of refilling cartridges compatible with certain Samsung models, is also in demand.
Therefore, using the example of cartridges compatible with several models of Samsung printers (Xpress M2020, Xpress M2070/2070W, SCX 3400/4200, ML-2160, 2165, 2165W, etc.) at once, we will tell you how they are refilled.
The SCX-3400/3405 printers can use the Samsung MLT-D101S monochrome cartridge. This black toner cartridge is also compatible with ML-2160, 2165, 2165W.
First of all, before starting the procedure, it is necessary to equip an appropriate workplace. To do this, cover the working surface of the table with a newspaper, and put on gloves on your hands.
To refill the MLT-D101S cartridge, first remove it from the device. To fill such a consumable item, the structure will need to be disassembled into 2 parts. To begin with, it is worth cutting off the plastic directions on the consumable element that fix the plugs on the sides. After removing the right plug, you should pull out the metal rod fixing the photoshaft. In this case, you should pay attention to the springs at the back, which press the cartridge flaps so that, when separating the halves, you do not lose them. After that, you can plug the left side. Now you can separate the halves of the MLT-D101S cartridge.
The next step is to clean up one half of the consumable and refill the second. After opening the cap of the tank, pour the toner into it. You can use ML-1210/1710 Toner Powder to refill the MLT-D101S Cartridge for ML-2160, 2165, 2165W, SCX-3400/3405 laser products. This ink powder, like any other, is toxic. so you have to be careful with it. When one reservoir is filled with toner, and the other is cleaned of waste, the cartridge can be assembled, taking into account the reverse sequence. Once assembly is complete, small self-tapping screws can be used to secure the end caps instead of the cut plastic guides.
After the MLT-D101S cartridge is refilled and assembled, it should be reflashed, since the Samsung CHIP installed by the Samsung office equipment manufacturer will block the operation of the device even after the refilling procedure, and the printer will not print. Thus, it is possible to refill cartridges MLT-D101S for laser printers ML-2160, 2165 and SCX-3400, 3405 MFP.
For printing on Samsung printers Xpress M2020, Xpress M2020W uses an MLT-D111S cartridge with a resource of about 1 thousand pages declared by the manufacturer. It is also compatible with other devices: Samsung Xpress M2070/M2070W/M2070F/M2070FW. And in order to refill this cartridge and use the printer for its intended purpose, you should first prepare the work surface in the same way as in the previous case.
Further, removing the MLT-D111S cartridge from the device, plastic directions are cut off on its sides, which allow you to remove the plugs. After removing them, the cartridge can be divided into two halves. After removing the next side covers, you can dismantle the photoconductor. After that, the white gear is removed, allowing you to remove the primary charge shaft. After this shaft is removed, you need to unscrew the screws holding the squeegee, and then remove it.
After disassembling and cleaning all elements from toner residues, the Samsung SCX-4200 cartridge can be assembled, then pour the powder into the corresponding hole on the left side and, after closing it, install the cartridge in the printer.
How are color cartridges refilled?
The procedure for refilling a color cartridge can be seen on the example of the Samsung CLX3305 device, for which the CLT-K/M/Y/C406S consumable element is suitable. This procedure is very complicated because the operation of the device will be blocked by the CHIP installed by the manufacturer. Therefore, in addition to refilling the cartridge, the device will need to be reflashed.
To refill the cartridge for laser color MFP CLX3305, toner from CLP-300 is suitable. Having prepared a high-quality powder of the colors corresponding to the cartridges (BLACK, CYAN, MAGENTA, YELLOW), and having equipped the working surface, you need to remove the cartridges one by one. Having disassembled each, in order to clean the components (shaft, blade, body), you need to drill a small hole on top cover cartridge for CLX3305 to fill the powder there. All these manipulations require caution, as there is a risk of damaging the case, which will lead to breakage of the CLX3305 cartridge. Therefore, many users of Samsung CLX3305 color MFPs prefer to contact specialized centers for refilling, flashing and restoring cartridges.
Below is a video on the topic of refueling: