Six easy steps to save your device.

Accidentally dropped your smartphone into a sink or pond, left your phone in jeans that went to the laundry, spilled juice, tea or coffee on your phone? This can happen to everyone at least once, and not all phones are protected from moisture, such as Samsung Galaxy S7, Apple iPhone 7 or Sony Xperia Z3 Compact. Spilled liquid is dangerous and short circuit, and corrosion of the smartphone. If the right measures are not taken in time, then a smartphone that has been in the water will face a complete or partial malfunction. The site's expert team has tried all known methods for solving the problem and offers simple steps to save your phone.

1. Get your phone out of the water

The very first thing to do if the phone fell into the water is to pull the device out of the water as quickly as possible (if you spilled liquid on it, go to step 2 of this instruction). Seconds can count - liquid can easily seep into the phone's case if it's not waterproof. However, if your phone is charging from the network at this moment, then in no case do not touch the device and the charger! It may be dangerous! First, turn off the power outlet, and only then pull the phone out of the water.

How longer phone is in the water, the less chance of a favorable outcome. Even if the lid and case elements fit snugly together, water can freely enter the chips, for example, through ports and connectors for charging and headphones, or openings for speakers and microphones. But even if the phone has been in contact with water for a long time, you still have a chance to save the device.

2. Pull out the battery, SIM card and memory card

Release the phone from the case (if any), remove the cover of the device and remove the battery from the phone case (if the case is collapsible and the battery is removable) so that the microcircuits on the board do not oxidize. Next, take out the SIM card and memory card - contacts and data on them, at times, are more valuable than the smartphone itself.

Never turn on your phone. It is better not to press any buttons or keys once again, as this can cause the water to go even further deep into the case. If you have connected any peripherals, then turn them off, if the ports are covered with plugs, then leave them open for ventilation.

3. Wipe your phone

Thoroughly wipe down your smartphone and anything you take out of your phone. A dry, absorbent cloth or towel will do. Carefully remove each drop from the surfaces accessible to you (depending on whether your phone has a collapsible case or not), because even one remaining drop can destroy the phone. Be careful not to leave pieces of paper or cloth inside the case, in corners or in gaps. If there is still water inside the device, then you can try to gently "shake" the liquid out of it. However, do not get carried away and do it with effort - there is a risk that water can penetrate even deeper into the device.

4. Disassemble your smartphone

As a rule, it is enough to do with the removed cover and the battery. However, if you believe in yourself and you have experience, then disassemble the phone into the smallest possible separate parts. This is done so that the air (or absorbent) has a large contact area for good circulation and drying.

It is worth considering that in this case you will lose the warranty, but most often the smartphone warranty does not cover cases of “bathing” in water, so you will not lose much in this regard. We advise you to record or photograph the disassembly step by step, this will help you quickly and correctly assemble the device after drying. After you have disassembled the phone, repeat the steps from the previous paragraph.

If you spilled juice, tea, coffee, wine or beer on your phone, be sure to rinse the stains with distilled water or alcohol so that no traces are left that can then dry out. These drinks contain many chemical elements that, remaining on the surface of the device elements, destroy them, so they must be removed. If this is not done, then your device will die at the most unexpected this moment, taking with them valuable information to the "other world".

5. Dry your phone

Now it remains to dry the smartphone. There is an opinion that it is best to dry the phone with a hairdryer, but we do not recommend resorting to this method. If there is moisture left somewhere, then the hair dryer can send it even deeper into the case, which can only “finish off” the phone. Also, do not dry the device in the oven or microwave. For such situations, a vacuum cleaner with narrow nozzles is more suitable.

If you don’t have a vacuum cleaner at hand and you, at your own peril and risk, decide to use a hair dryer, then turn on a warm stream slightly warmer than room temperature and keep a distance (distance to parts). A vacuum cleaner, on the contrary, will draw moisture. You need to bring it with a narrow nozzle to each of the holes and gaps and hold for several minutes. Just in case, make sure that everything is securely fastened and will not go inside the vacuum cleaner (especially if you have disassembled the smartphone).

You can also dry electronics in rice, but silica gel is preferable. You can also simply dry the components in a dry room on plain paper for about one and a half to two days. The disadvantage of silica gel and rice is that they themselves are quickly saturated with moisture and over time, the rate of absorption of moisture decreases. You will have to rotate your smartphone every couple of hours or replace the absorbent, so air drying is much easier.

By the way, if you use moisture-wicking substances, it is better to put them with the phone in a small sealed package.

6. We collect and turn on

After one and a half to two days, you can assemble and turn on the device. First check your phone to make sure all connectors and parts are dry and clean. If yes, then you can collect the device. If you did not disassemble the phone in detail, then just insert battery. Try turning on the smartphone with and without a battery, but from the mains. There may be several scenarios here. If in both cases the mobile phone turns on, then check if everything is working properly. If not, but the computer responds to it through the USB cable, or the phone turns on or responds to charging from the mains, then a new battery may help. If in both cases nothing works, then you should contact the service center. Often it may be that the phone starts up, but does not work correctly, in such cases you can repeat the above steps (probably there is still liquid left somewhere) or take it to a service center for repair and tell that the phone has been in the water and that you were done to him. At the same time, keep in mind that even if the smartphone turns on or works after replacing the battery, a corrosion process may begin inside your device, which will work like a time bomb and “kill” it at the most unexpected moment. It can go long enough, and only in service center by treating the board with an anti-corrosion solution.

By following this simple guide, you can try to save and revive your phone. However, remember that a 100% guarantee in such cases simply does not exist. To protect yourself from such situations, you can buy special waterproof cases or follow simple precautions. Take care of your gadgets!

Recall that on our website you can see the test results of smartphones. Our experts tested the quality of popular models in the laboratory and, based on the test results, made a rating of smartphones.

Do you want to understand other important issues? Read

In this article we will tell you what to do if the phone fell into the water. The information is current at the moment because for almost all smartphones that do not have an IP67 or IP68 rating, moisture can cause serious damage. Water in this case begins to flow into the case, hit the board, the processor and cause short circuits.

First steps to save your phone

In case your phone fell into the water, you should not panic, it is better to try to remove it from the liquid as soon as possible. After all, the longer the phone is in the water, the greater the likelihood of damage to the components of the motherboard. Most people in this situation will immediately begin to press all kinds of buttons to check the phone's performance, but this is absolutely impossible to do in order to avoid a short circuit.

However, if the smartphone has a non-removable battery and remains on after diving, then the first step is to turn it on using the power button, and if the battery is removable, then immediately remove it from the phone. Together with the battery, you also need to remove the SIM card and memory card. Next, wipe the phone and its removable parts with a dry cloth and make sure there is no liquid residue.

In no case should you try to dry your smartphone with a hair dryer, and do not blow into the phone or shake it, because such actions can cause water to enter other components of the device. You can get rid of moisture inside your phone using the following 5 methods.

Isopropyl and ethyl alcohol

Isopropyl and ethyl alcohols have been available and inexpensive products for many years, which are used to clean radio circuit boards. As mentioned earlier, the main reason for the failure of devices is the corrosion of the motherboard elements, and isopropyl alcohol contains chemical elements that help prevent this corrosion and remove moisture. Also, their modern counterparts are water-based cleaning fluids, such fluids are not conductors. electric current, and their evaporation occurs instantly.

The fact is that when water turns into ice, its molecules have a less conductive effect due to an increase in the distance between the molecules, which prevents a short circuit.

If the phone did not turn on the first time, then try repeating the procedure again, and after several attempts, your phone will most likely turn on.

However, if you overexpose your smartphone in the refrigerator, you can get the opposite effect and aggravate the situation.

Drying your phone with absorbents

The method is already familiar to many, as it is very popular on the Internet. Rice is one such substance. It's no secret that rice absorbs moisture, and in theory, dipping your phone in an appropriate container of rice should do the same trick.

This method has indisputable advantage, as it eliminates the possibility of careless turning on the device while a large amount of moisture is inside it. However, this method does not guarantee full recovery smartphone, because the contained water can cause oxidation of the contacts and elements of the motherboard of the device and, as a result, lead to negative consequences.

Compressed air

primary goal this method is to speed up the drying process. The best option in this case is a cylinder with compressed air inside. Such cylinders are often used when cleaning hard-to-reach components, motherboards computers and laptops from dust.

To implement this method, pass air using a balloon through all kinds of openings on the phone: speakers, microphone, charging port and audio jack. Cleaning should be focused on the charging port, as it is closest to the battery compartment, which will give you more room to move air.

remember, that this way It is rather a preventive measure and will not allow the most effective removal of moisture.

Synthetic desiccants

Such a solution provides a quick and easy way to get rid of the water that has got into it. In the vastness of well-known Internet sites, there are many similar accessories for small electronic devices.

Synthetic desiccants are hermetically sealed plastic bags with special granules inside that effectively absorb moisture. The only disadvantage of this method is the cost. In our countries, such accessories are not in great demand, and not everyone dares to pay 1200 rubles for them.

Also remember that none of the above methods is a guarantee of a complete recovery of your phone. And in case of unsuccessful first aid to your smartphone, contact the repair center. We wish that such troubles do not arise in your life!

What should I do if my phone falls into water? This is not such a simple question as it might seem at first glance. Especially if the phone is touch sensitive. Indeed, in the life of any person such a situation can happen. No matter how confident a person is in his careful and accurate attitude to the telephone, but from emergency no one is safe.

What to do if the phone fell into the water, and for what reasons can this happen?

Firstly, it is banal that it can get wet from the rain. But for this, covers and other accessories are created. But they don't always save. The phone can fall into a river or lake while relaxing, it can accidentally be left in your pants and put in washing machine. It can also be accidentally dropped into a bucket filled with water during cleaning, or simply poured over with tea or juice. All this will lead to malfunctions of the device. But how to deal with it and what to do if the phone fell into the water?

A set of measures to save a drowned phone

What to do if the phone fell into the water, and what could be the consequences?

By and large, basically the above methods can quite save the phone. The worst option is liquid getting under the screen, especially if it is touch sensitive. It will be impossible to restore such a screen, and buying a new one is very expensive. Salt sea water is especially dangerous - it can lead to rapid corrosion of the circuit boards inside telephone set. If the above measures still did not bring the desired result, and the phone still does not work or works partially (some functions have failed), then it is better to quickly contact a service center to repair the device.

All the same, this is a high-tech device that probably costs several hundred dollars, and there is a very high chance that it will not work after getting wet. Unless, of course, you have one of those amazing waterproof smartphones like the LG G6 or .

Attention! You should definitely familiarize yourself with the list of their characteristics and prices. 🤩

Although more and more phone manufacturers over the past two or three years have begun to produce smartphones with a waterproof case. However, not all of us have the opportunity to buy a waterproof smartphone, and this means that we need to use other ways to protect it.

The best way to protect your phone from water is to take precautions ahead of time, using something like a waterproof case, for when you know you'll be in contact with water.

What to do if the smartphone still fell into the water?

To begin with, you should know that it costs 50/50 to count on the performance of a phone that has got water inside. There is no guarantee that the smartphone will actually be saved.

With the help of the following tips, I want to increase the likelihood that your phone will get out of this unfortunate situation. So let's get started.

Dropped your phone in water? Take it out of the water and make sure it's turned off!

I know it's hard to react quickly, but you have to pull yourself together! The longer your device stays underwater, the less chance it has of surviving. You must immediately remove the phone from the water.

Once you get your phone out of the water, make sure it's turned off. Even if it seems that everything is fine with him ... just in case, turn him off. If the phone is still on, just turn it off or remove the battery if you can. Then lay it in a safe place, preferably on a flat surface over several paper towels.

The good news is that even non-waterproof smartphones today tend to be a little more water resistant than older phones, and so there are a few things you should or shouldn't do.

What Not to Do After Your Phone Gets Water

• Don't turn on your phone! As I wrote above. Water is a good conductor and to avoid a short circuit, it must be turned off.
• Don't press any buttons. This can lead to further water penetration into the phone. It is best to try to shake it as little as possible.
• Do not shake or blow on the device. It can also push water into deeper areas of the phone. Especially try to avoid impact dryers - not only because of the blast part, but also because of the next point.
• Don't heat up your phone. Remember that excessive heat can also damage your phone.
• Don't move your phone too fast. Everything is the same as in the previous paragraphs, so that the water does not move inside the phone.

Disassemble the phone that fell into the water

Make no mistake on this step: I mean that you should remove everything that can remove regular user. If the back cover is removable, remove it. Similarly, try removing the battery (if possible), SIM card, and SD card. Lay it all out on a paper towel.

If you're a seasoned techie and you know the ins and outs of a phone, and you're not afraid to void your warranty, you can go ahead and take the phone apart completely. This will help to dry each part faster. Just be careful if you don't know what you are doing you will do more harm than good.

Try drying with a paper towel

First we need to try to get rid of the water with a paper towel to wipe down each component. Just make sure you don't mess with your phone too much. Dry everything carefully without shaking it too much.

Suck up the water with a vacuum cleaner

Of course, there are areas that paper towels can't reach. I told you not to blow on the phone, I didn't tell you not to suck the water. In fact, the vacuum cleaner can suck water drops from the phone without much risk. Just make sure the suction doesn't cause excessive shaking of the phone.

Time to dry

The most difficult part, this is due to the fact that the phone cannot be touched for a long period of time. This means that you will not be able to use your smartphone! If you have another phone you can take it, just make sure the SIM card is completely dry and put it in the work tube. Otherwise, just use public phones or signal smoke bombs.

Now it is a very common practice when the phone is covered with bags of rice, and they let it lick for about 2-3 days.

But why rice? Mainly because it is in every home. The idea is that rice absorbs moisture very well, which makes the environment around the phone drier and therefore helps to dry the device faster. But there are alternatives that might be better.

So you've done your best and a few days have passed. It's time to see if all your hopes have come true. Take the phone out of where you left it, put in the battery, etc. Then try turning on the phone. If it turns on and all buttons work, congratulations!

Tell us about your experience!

Have any of you tried these methods? What other tips do you have not listed above? Write in the comments! Thank you!

Ways to dry and repair a phone after falling into water.

Most often brought in for repairs Cell phones that have fallen have mechanical damage. There are many among the faulty devices and "drowned". Often the phone falls into the washstand or toilet. But sometimes one cup of tea is enough to fail. In this article we will tell you how to revive the "drowned man".

No one will give a guarantee, even in the service center they will not say with a 100% guarantee whether the phone will work. It all depends on how long the device has been in the water and how quickly you dried it. Water usually penetrates deep through the holes for the headphones, the charging port. The likelihood of resuscitation of the device increases if you immediately disassemble the device and dry it.

Many people try to dry the device with a hair dryer, but this is an ineffective method of dealing with moisture.

Phone rescue instructions:

• Remove it from the water immediately. Remove the back panel and remove the battery
• Some modern models are sold with a screwed cover. In this case, the probability of saving the device is reduced.
• Unscrew the screws and remove the back panel, remove the battery, all cards
• Using a dry, lint-free cloth, blot everything inside, the battery also needs to be wiped
• Leave all parts of the device on dry wipes and let dry completely.
• Do not try to turn on the gadget. Wait for complete drying for 2 days
• After that, assemble the phone and turn it on

What to do if you fall into the water Xiaomi phone, Samsung, Lenovo, Asus, Zte, Sony, iPhone, Android?

This is the easiest option, but not the most successful. The fact is that warm water accelerates the corrosion of the metal, so all contacts will oxidize faster. But still, you can disassemble the phone, wipe it with a dry cloth and put it on the battery all night. In the morning, collect the device and try to turn it on.

Rice is an excellent adsorbent that absorbs moisture well. With it, you can dry the device, while moisture is absorbed even from hard-to-reach places.

Instruction:

• Take your phone out of the water and quickly remove the cover
• Remove battery, put dry rice in bowl
• Immerse the apparatus and battery in the rice. Fill everything with cereal
• Leave the gadget in rice to dry for 2 days
• After 2 days, try to assemble and turn on the device

This does not mean that the phone is broken. Often, during a shutdown, the battery will drain for 3 days. After that, it is unlikely to charge it. Many Chinese phones Sold with two batteries. Try to make a replacement. Often the problem is the oxidation of the USB connector through which the device is charged. In this case, you can solder the connector itself. But you are unlikely to cope on your own, so contact the service center.

Why the screen does not turn on, the sensor on the phone that fell into the water?

The phone may turn on after being dropped into water, but the screen does not respond to touch or does not glow at all. In this case, moisture has entered the screen. It is also possible to short the contacts in the screen. Perhaps the service center will be able to fix the contacts and dry the screen. But often you have to change the entire screen.

If only this happened to your gadget after falling into the water, then consider yourself lucky. This is a simple and inexpensive repair. The speaker is a hole through which moisture enters. The service center will quickly replace the speaker. You won't be able to fix it yourself.

It all depends on the quality and cost of the phone. AT Chinese copies, which are "clones" of well-known manufacturers, cheap cameras are built in. It is almost impossible to repair them due to the complexity of soldering the cables. Sometimes a replacement cannot be made, since externally identical cameras can differ significantly. In this case, you will have to use only the front camera.

In known devices, you will have to replace the camera. This will hit your wallet, since parts for famous phones are not cheap. But perhaps everything will cost by cleaning the contacts, and the camera will not have to be changed.

First, try to clean the microphone hole. This is done with a toothpick or needle. But if you do not have experience, then we do not recommend doing such repairs. You risk piercing the microphone. In this case, the part will need to be replaced. This repair is also inexpensive, so consider yourself lucky.

In no case do not dry the phone with a hair dryer or microwave, overheating adversely affects the health of the device. Do not immediately try to turn on the device. It needs to be completely disassembled SIM card and a memory card. Put the device itself with the battery in rice for a day. Only then assemble and try to turn it on. If the gadget does not respond, do not be discouraged, take it to repair. After cleaning the contacts, most devices work fine.

Do not try to deceive the seller and say that the device broke down on its own. Each phone has an indicator that changes color when it comes into contact with water. Therefore, any master will see that the phone is wet. Unfortunately, this is not a warranty case, so you will have to pay for repairs yourself.

As you can see, it is quite difficult to guarantee that the phone will work after drowning. If you reacted in time, disassembled and dried the device, then there is a chance to save the gadget.

VIDEO: Drying the "drowned" phone