Using Beeline remotes can be extremely convenient, but even the most reliable devices can sometimes fail. Therefore, in order not to lose the opportunity to enjoy your favorite TV shows and watch interesting TV shows and programs, viewers should know how the Beeline remote control is set up correctly.
To understand the mentioned procedure, it is enough to look closely at the type of equipment purchased and the model of the launcher, understand the features of the operation and settings of the equipment, and make several trial attempts to set up the set-top box. As a result, even if the first approaches are unsuccessful, the user will be able to achieve a positive outcome and regain control of the TV. And in the event of the next malfunction of the equipment, if it happens unexpectedly, it will be much easier to deal with difficulties.
When setting up the PU, you should pay close attention to several features:
- remote control model and the possibility of its interaction with various set-top boxes, for example, Motorola;
- set-top box model (for similar reasons);
- code, if required (located in the instructions on about page 20);
- possibility automatic search correct code.
Additionally, you will need to decide whether to reset the equipment parameters to the factory level. Such actions may be necessary when problems arise and serious errors are made. But it is much more reliable to immediately show vigilance and discretion, not allowing yourself inaccurate movements and thoughtless button presses.
How to reset the Beeline remote control?
The first step is to find out how the Beeline remote control settings are reset to the factory level. This process contains the following steps:
- first of all, you need to press the STB key;
- then you have to press the Setup button and wait for the indicator to blink twice;
- alternately press the numbers 9, 7 and 7;
- wait for the STB button to blink four times.
The last signal means reaching the desired goal and resetting the parameters to the factory settings. In the absence of the indicated reaction of the equipment, you should repeat the described procedure or contact the consultants of the cellular company by calling the contact service phone.
Setting up the Beeline TV Motorola remote control
To produce manual setting remote control to the TV, you need to clarify in advance the code that is used for the model and type of equipment you have. The instruction in Russian, attached to each set of equipment, will allow you to choose correct option or will offer the viewer to choose one of several options suitable for the purchased set-top box. Knowing the code, it remains:
- turn on all appliances;
- press the Set and Aux or Set and TV buttons until the corresponding indicator lights up;
- enter the selected digital code;
- press the active, highlighted button.
After the process is completed, it is worth checking to make sure that the PU and the TV interact correctly. If there are problems, you will have to repeat all of the above steps using a different combination.
Setting up the Cisco Beeline TV remote control
A simpler approach to setting up the Beeline TV remote deserves special attention, in which the viewer does not have to look for a special password. When using it you will need:
- turn on the set-top box and TV;
- press Set and keep it pressed for at least 3 seconds until the indicator lights up;
- press the "up" key and then sequentially switch to the right or left;
- do not stop the procedure until the equipment is turned off.
Self-shutdown of equipment (Cisco or other model) signals the successful completion of the procedure. The user will only have to check and start using the PU for its intended purpose.
Setting up the Beeline universal remote control
The easiest and most convenient way is to set up a universal remote control on a TV. In this case, users will have to press STB, after which they will have to simultaneously hold down the Setup key and, depending on the brand of set-top box, A (Tatung), B (Motorola), C (Cisco). Double blinking will signal the completion of the procedure, but in order to make sure that the actions taken are correct, you should not neglect the check. The easiest way to do it is by pressing the sound switch button. If the volume changes, everything is done correctly.
A universal remote for all TVs and other devices can be called a great invention and a dream come true for owners of a large number of consumer electronics. For example, if the house has several TVs connected to a satellite receiver, an audio system, a DVD set-top box and other devices that can be controlled remotely, this device will be irreplaceable. The convenience of using universal remotes lies in the fact that all the electronics in the house can be controlled from one remote control. In this case, there will be no confusion when looking for the right remote control to turn on or off any device. But no matter how good the universal remote control is, it must first be configured, since without this procedure this device cannot be applied either to the TV or to other units.
Any universal remote control in appearance and device is similar to the native remote control of a TV, receiver and other remote control devices. Inside there is:
- a transmitter that creates a signal;
- system board - commands are sewn into it;
- place for batteries;
- IR diode transmitting signal;
- keys for entering commands by the user.
Principle of operation next. For universal models, commands for a large number of devices are sewn into the microcircuit. By pressing the buttons, the user sets a command that passes from the microcircuit through the transmitter and enters the LED. The LED broadcasts the specified signal to the receiver of the TV or other equipment.
Despite the obvious ease of use, universal remotes have not been without drawbacks.
- The build quality is quite mediocre.
- Ergonomics and service life are significantly lower than branded ones.
- The universal remote after binding may not perform full set functions, as a rule, it is designed for general actions- switching channels, adjusting the volume, selecting a signal source, and more.
- If the connection is made to the equipment of little-known brands, then the procedure may fail.
- Many universal remotes have great amount buttons. If the device is initially simple, then the extra keys can interfere and annoy, and the remote control itself has impressive dimensions. However, the extra buttons have a plus - they can be assigned additional functions, as well as link to other devices. In this case, one universal remote control will allow you to control the air conditioner, TV and smart set-top box.
It is worth noting that before buying, you should make sure that the remote control is compatible with the device to which it will be connected. Remote control units are often sold in a blister-type package, therefore, if it does not work, it will not be possible to return it within two weeks: the factory packaging has been violated, and according to the law, the seller has the right to refuse.
How is the setting
Synchronization of the universal remote control and the TV can be done in two ways: automatically or in manual mode. The first option implies automatic selection of an encoding that corresponds to a specific manufacturer, in the second case, the connection is made by enumerating commands. The setting procedure different models similar, but there may be differences that are best clarified in the instructions.
It was mentioned above that the tuning algorithm may differ for different manufacturers, but general principle similar enough. Let's consider it in more detail.
Automatic synchronization
Most universal remotes have code auto-select function. All you need to do is turn on the TV, point the remote at it and start the search with a special button. Next, it remains to wait until the TV turns off, or the sound volume starts to change. In this case, the process must be completed by pressing the same key again.
Checking that the correct code is selected is easy - you need to check the operation of the main functions. If something does not work, then you need to re-search the code or switch to the manual connection option.
Manual sync
Perform pairing in automatic mode not difficult. However, this does not always work, or not all buttons work as they should. In this situation, you will need to connect manually. For this you need to find device code in the instructions for the remote, on the manufacturer's website or just on the forums. After that, pointing the remote control at the TV, the desired combination is entered. Often, a set of codes is indicated for one manufacturing company (for different models), so finding the right one can take time.
Important! Serious TV brands have information on connecting to universal remotes on their website, in addition, there you can find a list of certified remote controls that are guaranteed to fit the company's devices.
Setting up popular models
Let's bring concrete examples settings universal remote control on the example of popular products.
SUPRA
To set up the Supra device - the universal remote control for the TV, follow these steps.
- Turn on the TV receiver and point the remote control in its direction. But in advance you should find on the Internet a code for PU corresponding to your TV model.
- Next, press the “Power” button and, while holding it, enter the code for your TV receiver. The button must be held until the indicator on the remote control blinks 2 times, after which it can be released. On this setting can be considered complete.
- Check the operation of all buttons on the device. If they do not work, repeat the second step again, trying to enter another code found on the Internet.
It is also possible to automate the entire process of binding PU. This will require:
- turn on the TV receiver;
- point the remote at the TV;
- to switch the PU to the automatic search mode, you need to press and hold the “power” button for 6 seconds - after this time, the lamp on the PU should light up;
- if auto tuning the universal remote control was successful, an icon will appear on the TV screen indicating the volume level “volume” - after that the button can be released;
- check the performance of the configured pu.
HUAYU
HUAYU's UPDU is the most common device forLCD andLED television receivers.
You can thank the manufacturers of this device, because they took care of the users so that they did not rack their brains on how to set up the remote control for the TV, and on the back of the device they applied brief instructions.
The instructions for the HUAYU PU read as follows.
- It is required to press the SET key, indicated in the figure above by the number 1. Without releasing this button, press POWER (2), after which the remote control will enter the programming mode. This is confirmed by the constant glow of the indicator on the device.
- Pressing the VOL button searches for the desired command. The button should be pressed until the volume scale appears on the screen. When you press the button, the indicator will react by changing the intensity of the glow.
- To exit the HUAYU debugging mode, press the SET key, after which the LED will turn off.
This instruction may also come in handy if you do not know how to connect the UNIMAK UPDU.
UNIMAK universal remote control
BEELINE
Old models of Beeline universal remote controls could only be tuned to a TV set-top box, and they did not have buttons "Setup". Also, that PU had complex settings. But in new models, this key is present, and setting up the remote control has now become very simple. In addition, it can be used for various devices. At first glance, this is not a very large remote control, on which there are many keys.
Binding remote control Beeline to Cisco TV box happens like this:
- first of all, you need to turn on the telly;
- then the stb key is pressed and released;
- at the same time, the setup and c buttons located on the public line are pressed, after which it is necessary to wait a bit for the indication of the stb key;
Beeline universal remote control
- after waiting for the stb button to flash twice, the setup and c keys can be released;
- to check if the link is correct, you can press the volume key.
To bind to the Motorola set-top box, at step No. 3, the SETUP and B keys are pressed on the Beeline UPDU. Accordingly, the Tatung TV set-top box is tied by pressing the SETUP and A buttons on the Beeline remote control.
In conclusion, we can say that there is no universal way to bind the UPDU. Each specific case has its own nuances of linking the device to different devices. But sometimes there is a similarity in the ways of connecting the PU, which can be used after reading these recommendations. If your remote does not work and you want to pick up a new model, turn your attention to the universal device. Its higher cost will pay off with significant ease of use.
If you have already placed a bet on interactive television, then they probably appreciated one of the main pleasant features of the control panel - the ability to replace the “lazy person” from the TV. Now the warehouse of remotes on the sofa or coffee table will give way to a single device that will gladly help you enjoy all the delights digital age. Programming the remote control is no more difficult than counting the number of consonants in the word "programming" ...
1. Enter programming mode
You need to enter this mode using the remote control from the set-top box. To do this, press and hold the buttons for two seconds. OK and TV until the light on the button flashes TV. In order to program the remote control, you must enter 4 character code, individual for each brand of TV. Below we provide this list. If the first code does not fit, then try the next one in the list and so on. Confirmation of the correctly entered code will be blinking of the light bulb on the TV button twice.
2. TV codes
1. Acer 1339 2190 1644
2. Aiwa 0701 1916 1908 1955 1505
3.Beko 0714 0486 0715 0037 0370 0556 0606 0808 1652 2200
4 BenQ 1562 1574 2390 2807 1523 2402 2214
5. Blaupunkt 0554 0195 0191 0535 0200 0327 0455 0170 0036
6. Elenberg 2274 1812 2268 2055
7 Fujitsu Siemens 1666 1298 1259 1248 1163 0808
8. Funai 1817 1394 1037 1666 1595 0668 0264 0412 1505 0714 1963
9. Goldstar 0037 0009 0370 0217 0247 0556 0163 0361 0109 0606 0714
10. Hitachi 1576 1772 0481 0578 0719 2207 0225 0349 0744 1585 0356
1037 1484 1481 2127 1687 1667 0634 1045 1854 0473 0343
2214 1163 0576 0499 1149 2005 2074 0797 0480 0443 0072
0037 0556 0109 0548 0178 1137 0105 0036 0163 0047 0361
0877 0217 2279
11.Horizont 1617 3024
12.JVC 0653 1818 0053 2118 0606 0371 0683 0036 0218 0418 0093
0650 1633 2801 2714 2578
13. LG 2182 1423 1840 1663 0178 0037 1305 1842 1768 0714 1637
0606 1319 1721 1265 0556 0715 1681 0001 0698 2057 2731
1859 1860 1232 2362 1149
14. N.E.C. 0170 1270 0036 0455 0009 0374 0217 0037 0556 0011 2144
0245 1704 0499 0653 0053 0661 0882
15 Panasonic 0650 1636 1650 0226 0250 1310 0361 0853 0367 0037 0556
0163 0548 0001 1335 0108 1480 2264
16. Pionier 0370 0486
17.Samsung 2051 0812 0618 0587 1458 1619 0556 1249 1312 2103 2137
1630 0644 2094 1584 2097 1235 0009 0037 1678 0217 0370
0060 0766 0814 0072 0264 1037 0163 1243
18. Sanyo 0208 1208 0292 0036 0011 0370 0339 0072 0217 0045 0009
19 Siemens 0191 0535 0554 0200 0195 0327 0037 0556 0361
20. Sony 1505 1825 1651 2778 1751 1625 0010 0011 0834 1685 0036
21.Supra 0374 0009
22. Toshiba 1508 0508 0035 1567 1289 1656 1667 0714 1243 1935 0070
1582 1265 1704 0217 0109 0195 0191 0618 1916 1908 0009
0698 0037 0832 1556 0650 1156 1343 1037 2732 2598 1163
23 ViewSonic 1755 1542 1588 1511 2101 2111
The full list can be viewed
3. Automatic code selection
If there is no desire to enter the codes listed above, then you can use the automatic enumeration of codes. It is done like this:
1. We repeat the entrance to the programming mode, which is described in paragraph 1.
2. Enter three digits from the remote control digital set-top box: 991
3. Now the button Ch+ on the remote is responsible for sorting out the code for programming.
When I first did this operation, I was quite surprised - on the screen, instead of my favorite car show, where they talked about the skoda car, which crankcase protection is recommended for installation immediately after purchase. It is made of steel and serves as a reliable protector of the engine from unwanted obstacles. It should be noted that the clearance of the car will decrease by about 0.1 m, but this change will go unnoticed for city driving. In addition, the engine compartment will remain clean longer (especially for splashes from under the puddles).
After the TV is turned off - don't forget to click OK to confirm the code (light on the button TV blinks twice as usual)
4. If the console from the set-top box controls both the set-top box and the TV at the same time ...
If such a situation occurs, it is necessary to change the control code of the set-top box itself. Yes, there is one too, and you just have to choose the one you need, by brute force. To enter given code, which, by the way, also contains four digits, you should put the set-top box into programming mode. Just three steps:
1. Hold buttons POWER and OK within two seconds.
2. Enter one of the codes - 3220, 3221, 3222, 3223, 3224
3. Test your remote
5. Full reset settings
1. Again, hold down the buttons for a couple of seconds TV and OK. light bulb on the button TV immediately let us know that we are on the right track, blinking twice.
2. Enter a combination of numbers: 977
3. Bulb on the button POWER should blink 4 times.
The remote control not only sits comfortably in the hand. but still looks pretty stylish - best alternative for overloaded and incomprehensible consoles modern TVs, most of whose features you don't use every day (brightness/contrast is the most banal example). If necessary, always keep a couple of batteries in reserve, so as not to suddenly return to the days of black and white programs, the remote control of which was the youngest in the family ...
remotes remote control are a practical, convenient thing, they allow you to comfortably use the TV. To control IPTV set-top boxes Beeline TV, TV, universal remote controls are used.
They are created by Motorola, they are easy to use, compact. But often users have problems in practice, they may encounter a situation where the remote control is locked.
In this case, the product simply will not work, will not be able to perform the necessary tasks. That is why you need to figure out in advance how to unlock the Beeline TV remote control, how to use cisco.
If you are faced with the task of setting up a remote control from the Beeline TV set-top box, then it is worth noting that the Motorola VIP 1216 model and others are popular. They are considered universal, so there should be no difficulty in setting them up.
There are two main ways to set up, as evidenced by the instructions. They differ significantly from each other, but both have the right to be. If the remote control refuses to work normally, then you should resort to one of them:
- In the first case, you will need to reprogram the product yourself in manual mode.
- It may seem simpler, since you do not have to deal with reprogramming. You can manipulate the standard menu.
May occur various problems with technology, for example, it may happen that the consoles themselves do not obey. In such a situation, it will be quite difficult to control the set-top box or remote control. There are also cases when the problem lies in the digital set-top box.
Do not forget that the TV has a television receiver, it can also cause problems - it can ignore the signals given by the remote control. In any case, you can deal with the problem, we have collected information about the settings instructions for you here:
Select your remote and download the official instructions.
Also, if you have an Ipad, you can control the TV through the "My Beeline" application -