home Safety Tricolor tv receiver firmware for free viewing. Tricolor tv receiver firmware for free viewing Updating the tricolor gs 8302 receiver

Tricolor tv receiver firmware for free viewing. Tricolor tv receiver firmware for free viewing Updating the tricolor gs 8302 receiver

What has been added in the latest version?

The receiver is more stable.
The TV Mail service works better.
The work of the "Cinema Hall" has been improved.
The "Status" menu has been improved - now you can use a short or expanded display of information.
Channels are grouped by subject.
The "How to pay" menu shows payment options for using the service.
Added "Frequently Asked Questions" item.
Improved EPG performance.

How to update the GS-8302 software?

You will need a flash drive of at least 2 GB formatted in FAT32. It must work in accordance with USB standard 2.0.
Extract the files from the archive. Copy files update.info and GS8302_hw0442_full_USB_0_23_164_20130924.dre to a flash drive.
Make sure there is only one version on the flash drive software.
It is important that the drive session on the computer is correctly terminated. Be sure to remove the device correctly.
The receiver power should not be turned off until the firmware is fully installed.
Insert the flash drive into the included receiver. A message should appear on the screen stating that new version firmware.
Press "Yes" using the remote.
Service messages accompanying the software update process will begin to appear on the screen of the successor. When the indication of the form “b - YY” appears on the screen, where YY is the percentage of software installation completed, remove the USB flash drive from the receiver after installation is completed.
After the end of the process, the receiver will turn off, when you turn it on again, the device will work with new firmware. To access new add-ons, you must reset the settings to factory settings. After resetting the settings, you need to set the system language, antenna and select a transponder.
Select the region in which you are located, and if it is not in the list, then "Main". will start automatic search channels that are stored in the device's memory.

To make sure that the firmware on the GS-8302 has successfully installed, go to the status of the receiver and check the number current version software.

Why update software?

The new GS-8302 firmware provides more user-friendly interface. It will be easier for the user to use the “Kinozala” service. In addition, the receiver will work more stable. The fewer failures, the more accessible and enjoyable leisure time in front of the TV.

It is difficult to imagine a person who voluntarily refuses the opportunity to save money. Trying to avoid paying, users constantly come up with new loopholes and solutions. And one of the most popular savings methods is firmware for free viewing Tricolor for gs 7300 and other receiver models.

Usually, the firmware of the equipment means the installation of the update required by the provider. It allows customers to use additional features and greatly enhances user experience. Moreover, sometimes an outdated version of the equipment is the cause of problems, since high-quality broadcasting requires an appropriate level of technology.

But when it comes to firmware for free TV viewing, it's pointless to talk about updates. In this case, it is about complete replacement console software. Therefore, when making decisions about making changes, it is worth remembering the irreversibility of such actions.

Free firmware Tricolor TV for viewing

the user must first download the file;
then you need to prepare the equipment;
and install the program.

Nothing extra needs to be done. But it is worth considering the possible consequences of the described actions:

breakage of the console in case of an error;
suspension of service by the provider if it detects a breach of contract;
the impossibility of obtaining warranty service, since the introduction of changes to the software unplanned by the satellite company makes the contract invalid.

It is important to emphasize that most often subscribers encounter the first trouble, since any mistake they make (even the smallest one) will lead to irreversible consequences.

Firmware GS 8300n (GS 8***) for free viewing Tricolor

First of all, to flash the Tricolor TV gs 8306 from a USB flash drive, you will need to download the appropriate file. If it is already ready, it will remain:

write the downloaded program to a memory card;
insert a USB flash drive into the USB port of the receiver;
turn off the receiver;
restart the equipment;
wait for the automatic launch of the download of the prepared software;
just wait until the installation of fresh files is over;
after the completion of the process, set the starting parameters for the operation of the equipment (time zone, city and other similar settings);
save the changes made;
restart plugin.

It is important to emphasize that during the installation of programs, in no case should you turn off the equipment. No attempt to influence what is happening is allowed, because if the process is interrupted, the receiver will be damaged, and its recovery will be possible only in service center. However, it will certainly be paid for the reasons already mentioned above.

Preparing for a Firmware Update

As such, preparation for self installation No software required. The only nuance that you need to pay attention to is the flash drive.

To write the resulting file to it, you will need:

format the memory card;
set as used file system FAT32;
use a special recording program to download the software in order to get bootable flash drive, not a set of files.

It is worth adding that in this case it is also important to wait for the process to complete completely so as not to encounter difficulties later.

How to flash a Tricolor TV card for free viewing of channels

People who are thinking about making changes to the map should immediately abandon such an undertaking. Only update of gs 8307 receiver is available, latest firmware which will improve the quality of broadcasts or improve other set-top boxes. And it is impossible to change or update the card in 2020. Moreover, any scratch, not to mention more serious damage, will bring it into disrepair, and therefore you should not even try to make changes to it. Moreover, not a single way to succeed in this senseless business has been invented.

Where can I download free firmware Tricolor TV

There is no single, permanent place where you can find and download a program to watch channels for free. This is due to the actions of the provider, which is trying to track vulnerabilities and deal with unauthorized access to your own broadcast. Therefore, it is much more reasonable not to look for workarounds, but simply pay for one of the packages and watch your favorite shows in peace. But, if you cannot do without installing additional software, you should visit specialized forums to download it, where advanced users share experiences and secrets.

On April 12, 2017, new software (software) for GS 8302 receivers was released, aimed at improving and improving the operation of this equipment.

Before starting the update, go to the “Status” menu item and write down the values indicated in the lines “Receiver software version” and “Module software version”.

After the update, the receiver software version should change to 1.25.322, and the module software version to 07.00.00.

ATTENTION! Do not turn off the power of the receiver until the update procedure is completed! Otherwise, the receiver may be damaged!

To update the software of the receiver and the module, do the following:

1. Unplug the receiver's power cord from the outlet, and then plug the receiver back into the mains.

2. Switch the receiver to channel number 333 in the general list.

3. After a few seconds, a message will appear on the screen asking you to update the receiver software in the following way:

When this message appears, select "Yes" and press the "OK" button on the remote control.

4. After agreeing to update the receiver software, service messages about the process of updating the receiver software will start to appear on the screen. Updating the receiver software takes about five minutes.

5. Upon completion of the software update, the receiver will reboot and enter the channel viewing mode.

6. To continue the update, you must turn on the receiver again to channel number 333. Within one minute, a message will appear on the screen asking you to update the module software of the following form:

7. When this message appears, press the OK button on the remote control. The module software update takes about a minute. The type of service messages is shown below.

Attention! Do not turn off the power of the receiver while updating the module software! Otherwise, the receiver may be damaged!

8. After the software update is completed, go to the “Status” menu and make sure that the receiver software version has changed to 1.25.322, . and the software version of the module is at 07.00.00.

9. This completes the receiver software update, and the receiver is ready for further work.