Today, Wi-Fi is available in almost every home, office, shopping and entertainment center. Thanks to Wi-Fi networks, people easily connect to the Internet when needed. Free wireless access is, of course, convenient, but at the same time, router owners often worry and ask themselves: “How can I find out who connected to my WIFI?” This problem is quite relevant today, so it is important to understand all the nuances.

Depending on the model, the router may keep a log of work. But find there useful information quite problematic. The easiest way is to look at the current status and determine how many devices are connected. But this method is not entirely reliable, as it displays information in a given period of time.

What should alert the owners of the router?

Users who access the Internet via a Wi-Fi connection should be alert if they encounter situations like this:

• Decreased data transfer rate. There can be many reasons for this phenomenon, but it is more expedient to make sure that low speed not caused by connected foreign devices.
• Active flickering of the indicator. This usually happens while information is being exchanged with the Internet. If all "legal" devices in this moment do not work, but the light is still on, the user should be alert.

Table of connected equipment

Some users use the following method to help answer the question: "How can I find out who is connected to my WIFI?" To quickly check if unscrupulous users have connected to Wi-Fi, you can use the technique table view method. To do this, enter the IP address into the browser line, and then launch the command interpreter. You can do this like this: go to the "Start" menu, then select "Search", type "cmd" and enter "Enter". Then you need to run the "ipconfig" command. The router address will be displayed next to the Default Gateway label.

After entering the login and password in the window that opens, you can see a list of devices that connect to the router. If the IP and MAC addresses are unfamiliar, these users should be blocked. If necessary, you can limit their priority to a certain time.

How to find out who is connected to Wi-Fi using

This method is quite simple. When the owner of the router is overwhelmed with thoughts on how to check if someone has connected to my WIFI, you need to go to the settings and select the appropriate tab. All information will be displayed there.

To enter the settings panel, you need to enter the numbers that are indicated on the back of the router in the address bar of the browser. They may differ depending on the device model, but most often it is 192.168.0.1 or 192.168.1.1. Also, numbers, login and password can be found in the technical documentation.

When all the data is entered, you must press OK and go to First you need to enter the "Basic Settings" section, then the "Wireless Mode" menu and select the "Statistics" item there. wireless mode". On the right side of the window that opens, you can see the number of stations connected to Wi-Fi. In this statistics, you can see the MAC address of devices, total number packets and type of encryption.

Experienced router owners know that you can solve the problem: “Check if someone has connected to my wifi” using a cable. To do this, there is a tab "DHCP", there you need to find the item "List DHCP clients". If there are connected devices, not only their MAC address will be displayed, but also their IP address.

How to block someone else's MAC address?

If, in search of an answer to the question: "Who connected to my WIFI?" the owner has detected other people's connections, the MAC address must be blocked. It is not difficult to do this, it is enough to filter out foreign devices. To do this, go to the "MAC Address Filtering" section and select the "Enable" item. Next, you should set the button on the first parameter. After that, you can add someone else's address and save all changes. This measure will block access to the Internet, and third-party devices will no longer be able to use Wi-Fi.

You need to choose a password with great responsibility so that it is difficult to guess it. A simple and predictable cipher is unlikely to become an obstacle for connecting unscrupulous third-party users.

It is desirable to combine uppercase and lowercase letters, numbers and punctuation marks in the password. It is advisable to make it as long as possible.

Scanning the local network

There is another way, it is to scan local network. You must enter the IP address of the laptop or computer and select the closest range. After checking, two addresses should be displayed: the connected device and the modem. If there are more of them, this indicates that other people's devices are connected to Wi-Fi.

Some users set up WEP encryption, but this method is unreliable. There are programs that allow you to crack the protection and connect to the Internet. WPA is a stronger barrier, but not all older router models support this protocol.

Wireless Network Watcher

It will be useful for users to know that there is a program to check. Who is connected to my WIFI can be determined using the Wireless Network Watcher. It is better to download the utility from the official website in order to avoid various fakes.

You need to run the program from the device that will be connected to the router. Otherwise, there will be no benefit from Wireless Network Watcher. After scanning, you can see not only the number of connected devices, but also their MAC addresses, and even the name of the manufacturer.

But it will not work to disable unscrupulous users through the program. To do this, go to the router settings and block addresses. Professionals use special utility, which allows you to determine the location of the connected device with an accuracy of several meters.

There are quite a few ways to find out who connected to my WIFI, and each user can choose the one that suits him.

Quickly determine the number of connected to WiFi networks devices (two different ways), set up rules for limited and secure access to wireless network, as well as understand programs that facilitate the implementation of the above actions.

Signs of unauthorized connections

First sign quite often you can encounter sharp drops bandwidth connections. Most often, the problem lies in the work of providers of various levels between you and remote server, but it is quite possible that the traffic of your channel is consumed by unauthorized persons. Second sign, which makes you think about controlling access to your Wi-Fi channel - these are suddenly arising access restrictions for your ip-address for any sites. Also, pay attention to the behavior of the indicator wireless connection on the case of the router - when all devices are disconnected from the network, it should not blink, much less burn almost constantly.

How to find out how many devices are connected to my wifi?

How to know who is connected to my wifi? The simplest way do it in the control panel of your router.

To enter it, type in the address bar of your web browser the ip-address of your router on the local network (if no one has changed it, it will correspond to the one specified in the instructions and on the router body; usually it is ) and enter the credentials in the request window (according to the default on many routers is admin/admin). Further actions depend on the manufacturer of your router, but there are no fundamental differences, so let's consider the actions using the example of the shell of Asus routers.

In the control panel of your router - you will see the number of all devices connected to the router in the "Clients" section. Mouse click on it opens detailed list devices. For example, in the screenshot below we see two connected devices: a laptop and a phone.

For detailed information, you can refer to the "System Log-Wireless" menu, it does not display the network names of devices, but only the MAC addresses of their network interfaces. Since they (MAC addresses) were also indicated in the list of clients (which we looked at earlier), it will not be difficult to figure out who is who. In our example, we see that the phone has been connected to the network for a long time, while the laptop has just been connected.

If for some reason you do not have access to the router, you can get by with third-party programs. The simplest option- this is a program laid out by the developer for free access. After pressing the F5 button (or selecting the corresponding item in the menu), the program will scan the entire range of addresses on the local network and display a list of detected devices.

How to see who is connected to a wifi router

More precisely, this question should have been formulated not “how to see who is connected to my wifi”, but “how to see which devices are not mine”. With phones and tablets, everything is simple: temporarily disable the radio module on them wireless communication, and they will disappear from the list of connected devices. You can find out the network name and MAC address of the computer by pressing the Win + R keys on the keyboard and typing in the window that appears cmd command to call command console, in which you need to enter the following: ipconfig /all

In our example, the Notebook device found earlier turned out to be our own laptop. Simply put, all devices found in the example earlier belong to us, and there are no extraneous connections.

How to disconnect unknown users from your wifi

Through the control panel of the router, you can disable wireless transmission data for any of the devices on the network. Since they are identified by unique MAC addresses, in fact − serial numbers their network interfaces, turning on the "Reject" filter for the device will indicate the impossibility of its operation in your WiFi networks, no matter how its owner tries to connect.

How to secure your Wi-Fi? We prohibit connection to wi-fi unknown devices.

From the previous example, you can also understand how to protect yourself from connecting unknown devices: turn on the “Accept” MAC address filter and add to the list all gadgets and computers that will be allowed to access the network. Also, don't forget about security settings: use password protection of the network of sufficient length with the WPA2 authentication method (unlike the outdated WEP, which is quite easily broken by a wifi sniffer, this will make an intruder spend quite a lot of time to break into your network).

Programs to control everyone who is connected to wi-fi

As you have already seen, it is most convenient to monitor the status of your network through the control panel of the router - this way you can quickly identify an intruder and close his access to the network. However, the router cannot alert the host when new devices appear on the network. For this purpose, you can use third party programs, for example, already described above: set in its settings the frequency of network scanning and suitable type notifications about a new device, and you will always be aware of new connections in your wireless network.

Another program has similar functionality - . But, unlike previous program, it can automatically start in the system tray along with Windows.

How to find out who is connected to my WiFi router? Every owner of a wireless network wants to know the answer to a question. This may be needed for various purposes, but most often if you want to find and punish the "criminal".

How to find out about an unauthorized connection?

There are only 3 signs that someone is connected to wireless internet:

1. Sharp and frequent fall. This may mean that someone is connected to the network and is stealing traffic. Of course, there is not always an extra user. Often this may be due to the work of the provider itself. Therefore, it will not be superfluous to find out who is connected to Wi-Fi, and how to remove this “guest”.
   
2. “The site is not accessible to my IP!” - this is what you can hear from some PC owners, in WiFi connection who interfered with someone else.
   
3. When disconnecting gadgets and a PC from the router, its indicator light should not blink or stay on.
   

How many people use the WiFi connection?

How to see and check who is connected to my WiFi, determine the number of users? You can do this directly.

Important! To exit the router management menu, enter in address bar browser address of the router. Typically, this is 192.168.1.1.

In the window that opens, enter the data account. For most wireless network devices is admin/admin (password and login respectively).

How to determine who is connected to my WiFi? router The question boils down to the actions mentioned above on any router. The number of connected gadgets will be displayed directly in the control panel under Wireless. In some models, you will have to open the corresponding tab, while in others the number of users will be visible in the right block of the window.

To view detailed information about who is connected to the router, you should go to "wireless statistics" (wi-fi statistics). What you should pay attention to? The names of computers and other devices will not be displayed here, but there are MAC addresses of all gadgets. Here you can also block specific user. Important point: Logging out from a specific MAC address will not be available until the user is removed from the banned list or the router is reset to factory settings.

Router Map Viewer Software

It is most convenient to monitor the "left" users and the connection status in the settings of the router itself. The control panel of the router will allow you not only to see who is connected to my Wi-Fi, but also to block access to both the network itself and the devices in it. The disadvantage of this solution is that the router does not send notifications about the connection of new users.

Because there are programs to see who is connected to WiFi. Among the most popular are:

1. network watcher. You just need to launch the application and press the F5 key - and the application will start searching for all available devices and their addresses on the local network. To configure the program to automatic mode and receive appropriate notifications, you need to set the scan interval.
2. WiFi Guard. Its functionality is similar to the previous software, but unlike Network Watcher, it can be launched in the system tray when the OS starts.

Any of the programs is convenient and fast way solve the problem of how to find out who is using my Wi-Fi.