- into a computer if the motherboard does not have a PCI slot? That's it, I bought motherboard, I forgot to clarify when buying whether there is a PCI slot on the motherboard. I have a professional Creative Sound Blaster sound card that plugs into a PCI slot. So what's now? Alexander.
- Hello, please tell me, the built-in sound card on my laptop has failed, the service offers to replace the laptop motherboard. Is there any other solution to my problem. Nastya.
- The problem is this, I installed a discrete sound card in my system unit, I installed the drivers from the supplied CD, but there is no sound. Interestingly, before buying a sound card, they checked me and the sound was. Maybe I installed it incorrectly? My motherboard has one PCI slot and is located directly below the video card, covering half of the video card fan. Does this harm the video card?
By the way, many professional sound cards from Creative are installed in the slot PCI Express x1, which is present on many motherboards and is usually not occupied by anything.
You also need to remember that on some motherboards, after installing a discrete (separately placed) sound card, the built-in sound card must be disabled in BIOS.
However, you can install a discrete sound card for yourself not because your built-in sound card has burned out, maybe you are simply not satisfied with the quality of the built-in audio solution of your motherboard.
For example, let's install a sound card in our computer PCI interface.
With the computer turned off, open the side cover of the system unit and carefully look at our motherboard, it has two PCI slots and two free PCI Express x1 slots, in any of which you can install a PCI Express x1 interface sound card. One PCI slot is not available, the video card cooling system closes it, which means that another one remains.
We have two sound PCI cards, the first simple budget C-Media at a price of 250 rubles, the second professional Sound Blaster. They are equally easy to install.
First, remove the plug on the back of the system unit. On some cases, such plugs are held with fixing screws, unscrew the screw and remove the plug. On cheap cases, such plugs simply break out.
If the video card bothers you, you can remove it, install the sound card and put the video card back. Now install the sound card in the PCI slot and attach it to the case with a fixing screw.
View of the rear wall of the system unit after installing the sound card.
As you can see, in my case the sound sound card Blaster also closes half of the video card fan, but my system unit has been working this way for a long time, the temperature of the video card remains normal, and there are no complaints about the sound card either.
If you install a budget sound card instead of Sound Blaster, the video card cooler will remain almost uncovered.
Do I need to disable the built-in BIOS after installing a discrete sound card?
It depends on the motherboard. For example, on old motherboards, you need to go to the Advanced tab and set the High Definition Audio Driver option to Disabled, then save the changes and exit the BIOS.
In order to be able to record live instruments and voice, as well as output sound signal from computer to good quality, to fully reveal the potential of the monitors used, each studio must have an external sound card. Unlike integrated solutions, a plug-in card gives you a lot more options and excellent signal quality, and in some cases even a performance boost in your DAW. However, if there are usually no big problems with connecting, then correct setting sound card is the subject of long debate and many written articles.
First you need to install drivers - this is a mandatory step, skipping which negates the full potential of the connected card. You can find the driver package either on the disk that came with the kit, or on the official website of the board manufacturer. Installation proceeds according to the usual scenario - double click on the installer, click on the button a couple of times Next” and wait for the procedure to complete. Be sure to restart your computer after installation - despite the fact that this point is often ignored, this step allows the system to start and load correct driver, while avoiding possible errors, which sometimes appear when "on the fly".
The next step in configuring your sound card includes selecting a default playback device. This will require:
- click right click mouse on the volume icon on the taskbar;
- In the drop-down menu, select " Playback devices»;
- In the window that opens, find the name of the connected audio interface and click once on the object to highlight it;
- Click on the activated button Default».
After this simple trick, all sound from the system and its applications will be routed through the sound card, which is definitely good. If sound recording will be made through the board, then you will need to perform the same procedure with the “ Sound recording devices”, which can be accessed in a similar way, through the icon in the notification area on the taskbar.
Now you need to configure the sound card in the sequencer you are using. This will require you to run your DAW(FL Studio, Cubase or some other) and load some old project. Go to the audio settings menu, and in the list of available drivers, select the previously installed driver from the connected sound card. By clicking on the button " Show ASIO panel” (or another that will open the driver settings) set the number of buffered samples to the average value as starting point. After that, close the settings and go to the most saturated place in the project where largest number tools. Start playback and check for crackles and stutters, and try playing the part on the midi keyboard. If everything plays well - you can try to reduce the buffer size in the settings, thereby reducing the delay time. On the contrary, if there are artifacts and distortions, you should increase the indicator to comfortable values.
It's no secret that sound cards that support the High Definition Audio standard can not only determine which jacks devices are connected to, but also play/record multiple audio signal streams in parallel. It's a sin not to use this functionality. Indeed, in our time it can significantly increase the level of comfort when working with a computer.
Let's say we have speakers connected to the back panel and a headset connected to the front panel of the sound card. And we want the sounds of system events and players to play through the speakers, and the sound from Skype goes through the headset. What benefits will this give us? When making a Skype call, you won't need to hastily plug in your headset or turn off your speakers so that others can't hear the conversation.
Setup in Windows 7
To do this, we need to configure the sound card driver for independent signal processing from the front and rear panels. Do the following:
Click the button Start and select Control Panel :
In the control panel, find your sound card manager. In our case, this Realtek Dispatcher HD :
In the opened window Realtek HD Manager click on the link Additional settings devices :
Select the simultaneous playback mode of two different signals for the playback device. And the split mode of all input jacks for the recorder. Click OK to save settings:
Now we need to configure the sound card so that all sounds default reproduced through speakers. Click right click on the volume control icon next to the system clock and select Playback devices:
The same window can be called up by clicking on the button Start on the Control Panel and clicking on the link Sound.
In the window Sound tab Playback that will already be open, select the item in the list Speakers and press the button Default(namely the button itself, not the arrow to the right of it). With this action you will set Speakers as priority playback device, i.e. all sounds will go through the speakers by default. See picture:
Now select the item in the list Realtek HD Audio 2nd output("secondary output", i.e. front panel output) and press arrow next to the default button. From the drop down menu select Default communication device. Thus, you have indicated that your system should use a headset for communication:
It should look like the picture below:
Now that the default playback device is set, click the button OK to close the window Sound.
In the window Settings choose a section Sound settings. Here, as the microphone to use, we need to select:
- as active microphone: headset microphone connected to the front panel — Mic in front panel (Pink):
- as speakers: a headset connected again to the front panel - select the device in the list 2nd output:
- and as a signal playback device incoming call select speakers.
Note. If you like, in paragraph call You can also choose a headset. But in this case, you may not hear the call if you move away from the computer.
It should turn out like the picture below. Once everything is set up, click Save to apply the settings.
Now all sounds (music, video, system events and sounds from the browser) will be played through the speakers by default, and a Skype conversation always will go through the headset.
Similarly, you can output sound from any application to desired device, no matter which playback device is in this moment selected by default. For example, for a DJ's laptop at a disco, it's more logical to choose the default sound output to the headset, and output only the sound from the AIMP player to the speakers. In this case, vacationers will not hear any sounds through the speakers, except for music.
Setup in Windows XP
Double click on the Realtek icon in the system tray to open the sound card manager (in our case RealtekHD Manager).
On the tab mixer in the settings area playback click icon Settings:
Check the box Enable multi-stream playback.
Click OK to save settings:
After that, you will be able to select the default playback device. Programs that do not have sound settings will output sound through it, as well as all applications that are configured to output sound to Primary sound driver:
In a similar way, recording of several streams is enabled.
Click icon Settings in the area of Recording:
Check box Enable Multiple Stream Recording.
Click OK:
Audio card is a device for processing audio on a PC. They come in two types: integrated (soldered to the motherboard) and discrete (installed separately). The first are the most common and represent two basic elements - a microcircuit and a host controller.
Quite often it happens that the computer does not see the sound card or it does not work correctly. This problem is most often found when communicating on Skype and is inherent in both laptops and laptop computers. Let's look at the causes of this problem and try to find the best solution suitable for all OS versions, including Windows 7, 8 and 10.
Sound card malfunctions and their elimination:
Drivers
Incredibly often there is a problem with the drivers for the sound card. Based on this, the first step in restoring sound is a thorough check of the availability and relevance of firewood.
To find out their status, you need to go to "". To do this, first go to "Start", then "Control Panel" and open "Hardware and Sound". After that, a window will appear in which you can find the desired item. This is the simplest and fast way.
Next, we need the “Sound and Video Devices” section, and if an audio card is installed on your PC, then it should be displayed here. Based on this, there are several options for further development of the situation:
Also incredibly important is the order in which drivers are installed. It's next:
After operating system will be loaded, proceed to install the previously downloaded software.
No codecs for audio
If there is sound during the startup of the laptop or PC, but there is no sound when you turn on the audio or video, then the problem is most likely in the codecs. In this situation, it is recommended to do 2 things:
Also note that you need to not just put them on, but do it right, that is, a complete set. Choose to download full set and when installing, select the "Lots of Stuff" mode.
These codecs are compatible with all OS versions, including windows 10.
Incorrect BIOS setting
If the built-in sound card does not work, be sure to check the BIOS and its settings. If the sound playback device is disabled - no matter how you want, but you will not be able to make it work in Windows. However, this problem is extremely rare because this device is enabled by default.
Motherboard failure
Another reason why the computer may not see the sound card installed in it. To check this, connect the component to another PC, if the audio card works, then the matter is in the failed motherboard.
Repairing it yourself without special knowledge of radio engineering is quite difficult, so it is recommended to immediately carry it in for repair.
Nothing helps?
If none of the above methods helped you, then try the following:
- If before that there was sound, but now it is not there, then it is likely that you have installed some drivers or programs that cause conflicts. In this case, you should try to perform a system restore.
- If there is a second card, then connect it to the PC and install new drivers on them, be sure to remove the old ones.
- The card may not be properly installed on the motherboard or connected incorrectly. It is recommended to check this just in case.
- If all else fails, take a chance and reinstall Windows. After that put the new software, and if the sound appears, then follow it when installing any program. In this case, you will immediately understand what the matter is and find the culprit.
These are extreme measures, however, and they can be beneficial and solve the problem.
Replacing or repairing a sound card
The last thing you can do, and which is always the right thing to do, is to repair or replace the sound card. If her output just wheezes or she finally broke down, then it is clear that the unit will not work correctly and reproduce a good sound.
In this case, you need to contact a specialized service with experienced craftsmen who will carry out quality repairs and, if necessary, select an audio card that is suitable for your computer. Of course, you can not spend money on restoring it if it breaks down, but just go and buy a new one yourself in the store. This will save you both time and money.
Now you know what to do if the sound card does not work on your computer, and you can fix the problem yourself in as soon as possible without contacting the service.
DIY integrated card repair video
PC owners often need to upgrade or repair the sound subsystem, and they wonder how to connect a sound card. The reasons may be different: the failure of the old one, the goal is to get a better sound by replacing the integrated motherboard card with a modern sound device.
Let's deal with the available equipment before buying a sound card. If you own a PC, there are several connection options. For laptop owners, due to the peculiarities of the platform, it is possible to connect a sound card only via a USB connector. Before purchasing the card, you need to examine the PC motherboard. On older models, you can use the PCI connector to connect. Manufacturers of modern motherboards and sound cards suggest using a PCI Express x1 connector for connection. Newer models may not have a PCI slot. So please read the description carefully. specifications your motherboard by finding out which of the presented connectors are in your model. Disable the built-in or remove the old discrete card. To avoid conflicts and possible malfunctions, you need to enter the BIOS of a PC or laptop by alternately pressing the DEL and F2 keys during boot. Next, you need to go to the tab or item called "Advanced". Here, in the “Integrated Peripherals” integrated device operation parameter, disable the built-in card: Onboard Audio or High Definition Audio Driver, set to Enabled to Disabled.
Thus, after that, you can fully enjoy all the benefits that your new model sound board. Replacing is a fairly simple matter if you approach the process responsibly and prepare, backed up by theoretical knowledge.