Program for the simulation of radio circuits, with a visual
demonstration of the work of the constructed circuit
in the form of a 3D finished device and transient graphs.
Program for making radio circuits.
It also includes the possibility of PCB layout.
and programming PIC controllers.
The distribution kit includes a visual presentation.
54Mb

Creation program electronic circuits.
Good handy simulator of electronic circuits.
It is very easy to draw radio circuits in it - interface
organized in the best possible way.
Program for drawing up electronic projects.
Before starting the simulation mode, do not forget in the menu
Simulate->Edit Simulation Cmd in Transient Tab
specify the Stop Time calculation time, for example 25m (25ms).
In simulation mode, a half-screen graph will open.
When we click the cursor on the required wire on the circuit elements,
the graph will display the change in potential at this point
during the given calculation time. To see
graph of the change in current through the element of the device, follows
just click the cursor on the required element of the schemes.
54Mb download LTspiceIV simulator

PCB tracing software
for digital electronics
password: mycad2000
copy crack to the directory with the program
and run 10Mb


Tags: Here is a software for designing simulation of schematic solutions. It's not hard to deal with her. Radio engineering programs are useful for radio amateurs. And this is not surprising. We need this program for simulation and modeling of radio engineering structures. These books contain the most interesting ideas useful devices, gives every radio amateur the opportunity to choose what he needs from a great variety of solutions and designs on the a3144 hall sensor, tried and tested in practice.

Suggested Solution

Exercises are given at the end of each section. They provide schematics and results obtained during the simulation when to run the circuit. Students are asked to solve these problems in order to compare their answers with those given in the book. The purpose of these exercises is not to study electrical circuits, but to be able to practice working with the program. It is also software for building circuit simulation.

Intuitive user interface

  • Multi-level hierarchy and support for multi-sheet boards allows you to quickly and efficiently develop complex schematic drawings.
  • positioning
  • The Organizing, List Positioning, and Automatic Component Arrangement functions help you quickly and easily optimize component placement and board dimensions.
  • Efficient tracing capabilities
  • A modern meshless autorouter is capable of high-quality and fast routing of both complex multilayer boards with different types components, as well as simple two-layer projects.
  • Comprehensive project review
  • Extensive project verification options at various stages of creation allow you to identify errors before sending files to the manufacturer.
  • The verification includes the following steps: automated verification of new components in libraries, which reveals possible signs of errors and minimizes the "human factor"; Schematic Connection Validity Check (ERC); checking gaps, dimensions and various signs of errors on the board (DRC); checking the integrity of connections on the board; comparison with the original project.

    Error Correction Method

    Errors are displayed in the form of a list and displayed in the project, it is possible to correct them "on the fly" with the restart of the check. They simplify their work. Here you can download radio engineering programs for free. Ours has a special focus. Download radio programs for free directly from this page - just click on the link. In addition to electrical parameters, data on cases, pinout and marking are given. When knowledge and practice are added to this framework, curiosity turns into curiosity, and amateur radio becomes a wonderful activity that can not only entertain you in your leisure hours, but enrich you with experience that will help you in your work, whatever profession you choose for yourself. At any professional activity there are many similarities in approaches and ways of finding solutions. To master this is to master the profession. Many of the principle electrical devices of the program can be developed on the fly with a minimum of menus.

Application Electronics is an indispensable assistant for electricians. It was created specifically for mobile devices on the android platform. The program was made by Russian programmers who are well versed in electronics and physics. The development turned out to be quite high quality.

Here it is clearly told about various subjects in the field of physics and electronics. From the application, you can learn physical and other laws. Also here you can find information about the use of microcontrollers in everyday life. And about how to program them so that they become useful.

From the program you can find out exactly how it works touch screen, which is very informative. There are lessons on how to make a smart fan, color music and other interesting things. Here you can find numerous articles about the basics of various creatures, which will allow the user to understand the essence of the ongoing interactions of objects.

Application Electronics done very well. There is a nice design that pleases the eye. And everything is done clearly and conveniently, which cannot but rejoice. The program will bring the user a lot of necessary knowledge.

Application features:

  • useful information from the field of physics and electronics;
  • instrument making lessons;
  • user-friendly interface.

Qucs, also known as the Quite Universal Circuit Simulator, was developed as an open source, open source, open source electronic circuit and circuit simulator. The program supports all kinds of circuit simulation, such as DC, AC, S-parameters, harmonic balance analysis, noise analysis and so on. Simulation results can be viewed on the presentation page or the program window.

Qucsator, the server side of the program, is a simulator command line, which manages the list of networks of a particular Qucs I/O format. By default, it was created to work with the Qucs project, but can be used with other applications as well. The program has support for exporting symbol images with Verilog-A files to C++ code, support for direct connection to Verilog-HDL symbols and VHDL subchains. Latest Versions Qucs have a GNU/Octave interface.

Key features and functions

  • support for Verilog-HDL and Verilog-A syntax in text documents;
  • support for exporting C++ code;
  • support for equations for Verilog-HDL and VHDL subcircuits;
  • precompiled VHDL modules and libraries;
  • support for all modern components;
  • open source makes it possible to develop extensions;
  • customizable and extensible interface;
  • built-in file converter;
  • the ability to download additional interface languages.

User-friendly simulator for designing and calculating electronic circuits and circuits.

Quite Universal Circuit Simulator software is an editor with GUI with complex technical capabilities for designing circuits. To manage complex circuits, the ability to expand subcircuits and form blocks is included. The software includes a built-in text editor, applications for calculating filters and matched circuits, line calculators and attenuator synthesis. The drawing can be framed with a frame and a standard stamp.

Qucs Circuit Builder includes a wide database of modern components divided into categories: discrete (resistors, capacitors, etc.), non-linear (transistors and diodes), digital (basic digital devices and logic gates) and others (sources, meters). Of particular interest are the figures and diagrams.

Qucs can be configured in many languages, including Russian.

The program runs on Mac OS, Linux and Windows XP, Vista, 7 and 8.

Is free.

Simulator - designer of electronic circuits "Beginnings of electronics"

There is a very interesting program, which is a simple simulator to demonstrate the work electrical circuits and work measuring instruments. Its convenience is not only in visibility, but also in the fact that the interface is in Russian. It allows you to model very simple circuit diagrams. The program is called "Beginnings of Electronics". Link to it at the bottom of the page, video channel of Mikhail Mayorov.

The program works from Windows 98 to Windows 7. The interface looks like this.

Below is the drawing printed circuit board, but for us the socket with the breadboard is of the greatest interest. Top control buttons: load circuit from file, save circuit, clear breadboard, get multimeter, get oscilloscope, show part parameters, part status, reference, (summary of electrical concepts), small list laboratory work for their independent implementation, instructions for using the simulator, information about the authors, exit from the program.

Watch the video on how the circuit simulator works.

What can be assembled on a circuit simulator?

On this simple simulator, you can collect quite a lot of interesting things. First, let's model a regular flashlight. To do this, we need a light bulb, two batteries and, of course, all this will need to be connected with jumpers. Well, what is a flashlight without a switch and a light bulb?

Double click to bring up the battery parameters window. On the tab that appears, we see voltage, internal resistance, showing its power, minipolarity. In this case, the battery is eternal.

When the circuit is assembled, we press the switch twice and for some reason the light bulb burns out. Why? The total voltage of the batteries connected in series is 3 volts. The default light bulb was 2.5 volts, so it burned out. We put a 3-volt light bulb and turn it on again. The light bulb glows well.

Now take a voltmeter. Here his “palms” light up. These are measuring sticks. Let's move the probes to the light bulb and set the measurement of DC voltage with a limit of 20 volts. The monitor shows 2.97 volts. Now let's try to measure the current strength. To do this, take the second multimeter. The device connected to the circuit showed almost 50 milliamps.

Almost like a real multimeter, you can measure many parameters. There is also an oscilloscope in the simulator, which even has an adjustable beam brightness. In addition, there is a rheostat, you can move the engine. There is variable capacitor, shunts, heating stove, resistors, fuses and more. Unfortunately, there are no transistors in this simulator.

Conclusions on the program "Beginnings of Electronics"

Multisim - electrical circuit designer

Multisim is one of the advanced programs for professionals and just people who are fond of radio engineering. The program can design a huge set of types of electrical circuits. If you want to simulate your electronic ideas and check their performance, then download the Multisim program. On the Internet there are options in Russian.

Program functions


Introduction to Multisim

Currently, there is not much open-source CAD. Nevertheless, among the CAD for electronics (EDA) there are very worthy products. This post will be dedicated to open source electronic circuit simulator. source code. Qucs is written in C++ using the Qt4 framework. Qucs is cross-platform and released for Linux, Windows and MacOS.

The development of this CAD system was started in 2004 by the Germans Michael Margraf and Stefan Jahn (currently not active). Now Qucs is being developed by an international team, which includes me. The project leaders are Frans Schreuder and Guilherme Torri. Under the cut, we will talk about the key features of our circuit simulator, its advantages and disadvantages compared to analogues.

The main window of the program is shown in the screenshot. There, a resonant amplifier is modeled on field effect transistor and obtained oscillograms of the voltage at the input and output, as well as the frequency response.

As you can see, the interface is intuitive. The central part of the window is occupied by the circuit being modeled. Components are placed on the schematic by drag and drop from the left side of the window. Modeling views and equations are also special components. More details on the principles of editing schemes are described in the documentation for the program.

The Qucs schema file format is XML-based and comes with documentation. Therefore, the Qucs circuit can be easily generated third party programs. This allows you to create circuit synthesis software, which is an extension of Qucs. Proprietary software typically uses binary formats.

We list the main components available in Qucs:

  1. Passive RCL Components
  2. Diodes
  3. Bipolar transistors
  4. Field effect transistors (JFET, MOSFET, MESFET and microwave transistors)
  5. Ideal op amps
  6. Coaxial and microstrip lines
  7. Library Components: Transistors, Diodes, and ICs
  8. File components: subcircuits, spice-subcircuits, Verilog components

The Component Library uses its own XML-based format. But it is possible to import existing component libraries based on Spice (provided in datasheets for electronic components).

The following simulation types are supported:

  1. DC operating point simulation
  2. Modeling in the frequency domain on alternating current
  3. Simulation of the transient process in the time domain
  4. S-parameter modeling
  5. Parametric analysis

Simulation results can be exported to Octave/Matlab and post-processed there.

Qucs is based on a newly developed circuit simulation engine. A distinctive feature of this engine is the built-in ability to simulate S-parameters and SWR, which is important for the analysis of RF circuits. Qucs can convert S-parameters to Y- and Z-parameters.

The screenshots show an example of modeling the S-parameters of a broadband high-frequency amplifier.

So, distinctive feature Qucs is the ability to analyze complex frequency characteristics(CCH), plotting on the complex plane and Smith charts, analysis of complex resistances and S-parameters. These features are not available in proprietary MicroCAP and MultiSim systems, and here Qucs even outperforms commercial software and allows you to get results unattainable for electronic circuit simulators based on Spice.

The disadvantage of Qucs is the small number of library components. But this disadvantage is not an obstacle to use, since Qucs is compatible with the Spice format in which models are given. electronic components in datasheets. Also, the simulator is slower than similar Spice-compatible simulators (eg MicroCAP (proprietary) or Ngspice (open-source)).

We are currently working on the ability to provide the user with a choice of engine for circuit simulation. It will be possible to use the built-in Qucs engine, Ngspice (spice-compatible console simulator similar to PSpice) or Xyce (simulator with support for parallel computing via OpenMPI)

Now let's look at the list of innovations in the recent release of Qucs 0.0.18 promising areas in the development of Qucs:

  1. Improved compatibility with Verilog
  2. Porting of the interface to Qt4 continues
  3. Implemented list of recent open documents in the main menu.
  4. Implemented export of graphs, diagrams to raster and vector formats: PNG, JPEG, PDF, EPS, SVG, PDF+LaTeX. This feature is useful when preparing articles and reports containing simulation results.
  5. Ability to open a schematic document from a future version of the program.
  6. Fixed bugs related to the hang of the modeler under certain conditions.
  7. A system for synthesizing active filters for Qucs is being developed (expected in version 0.0.19)
  8. The development of interfacing with other open-source engines for modeling electronic circuits is underway (