Official firmware BladeGF3_V1.0.0B04 -
If a custom or official firmware on ZTE, then create a topic on the forum, in the section, our specialists will promptly and free of charge help, incl. with backup and manuals. Just do not forget to write a review about your smartphone - this is extremely important. This page will also show firmware for ZTE Blade GF3. Please note that this ZTE model requires an individual ROM file, so you should not try firmware files from other devices.
What are custom firmware (firmware)?
- CM - CyanogenMod
- lineageOS
- paranoid android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- flymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and disadvantages of a smartphone from ZTE and how to fix them?
- If the Blade GF3 does not turn on, for example, see White screen, hangs on the screen saver, or the notification indicator only blinks at all (possibly after charging).
- If it freezes when updating / freezes when turned on (requires flashing, 100%)
- Not charging (usually, hardware problems)
- Can't see sim card
- The camera does not work (for the most part, hardware problems)
- Sensor not working (depending on the situation)
Hard Reset for ZTE Blade GF3
Instructions how to do hard reset on ZTE Blade GF3 (factory reset). We recommend that you familiarize yourself with the visual guide, which is called on Android. .
Reset codes (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off the device-> go to Recovery
- "wipe data/factory reset"
- "yes - delete all user data" -> "Reboot System"
How to enter Recovery?
- hold and hold Vol (-) [volume down], or Vol (+) [volume up] and the power button (Power)
- a menu with the Android logo will appear. That's it, you are in Recovery!
Reset settings on ZTE Blade GF3 can be done in a very simple way:
- Settings->Backup & Reset
- Reset settings (at the very bottom)
How to reset pattern
How to reset graphic key if you have forgotten it and now you cannot unlock your ZTE smartphone. On the Blade GF3 model, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
Advantages ZTE phone Blade GF3 are obvious: it is very cheap and at the same time has good technical specifications. Therefore, it is not surprising that this gadget is very popular on the market among connoisseurs of budget mobile devices. The ZTE phone is especially cheap when ordered directly from China. But there is also important nuance: from China, a smartphone usually comes with local firmware, which has English and Chinese and there is not a single Russian word.
The question arises: how to deal with it? The solution is on the surface: the phone needs to be reflashed, then its use will be much more comfortable. Moreover, the new firmware can be installed even independently, without contacting an expensive service center. We will talk about how to update the software on your smartphone in the framework of this article.
preparations
First you need to download the firmware file itself on a PC. You can do it or search for more new version on the official site . Downloading is completely free, and therefore updating your smartphone will not cost a penny. After downloading, you need to unpack the archive.
Also before installation software take care of creating a backup of all data and saving it on another medium. When you change the software, all settings will be automatically cleared and files will be deleted, so it will not be superfluous to make sure that they are safe.
Before the start, you also need to charge your ZTE smartphone by at least 30-50% (or better completely) and check if the computer has a driver to recognize the mobile gadget.
When all the preparations are left behind, proceed to the installation.
FlashTool
The most popular way to install new software is to use the . How to flash a gadget with it? It is enough to connect the smartphone to the computer via USB by performing USB debugging in the settings mobile device, then run the program and specify the path to the archive with the firmware in it. Next click on Download, starting the installation - and the process is started. You need to wait a few minutes for the software change to complete successfully, and then all that remains is to reconfigure your smartphone.
Recovery
You can also reflash the phone through Recovery. In this case, you download the file with the new firmware from your computer to an SD memory card. You need to insert the card into the gadget, start it in recovery mode using the volume down and power buttons, then perform a complete wipe of data and settings and install new software, indicating the path to it on the memory card.
In both cases, the first launch of the smartphone will occur within a few minutes. Do not be alarmed if the process takes longer than usual: this is a normal situation if the system has been updated.
If after turning on the phone it works well and everything suits you - congratulations, you have changed original firmware to a more convenient custom one, spending only a few minutes on it and saving yourself from unnecessary financial costs!
Even their most worthy devices, manufacturers eventually lose support, that is, there always comes a moment when the smartphone stops updating itself over the air. Subsequently, a number of problems arise with normal functioning devices.
The best way out of the situation is to flash the phone, but this process is not very easy to perform without the appropriate experience. Below is a guide for self-implementation of this difficult procedure using the ZTE Blade Gf3 android device as an example.
Short description
Back in 2015, the ZTE company introduced to the world market a powerful for those times device of the Blade model of the GF3 version. Many users and this moment successfully use this smartphone, since in terms of functionality it almost completely meets modern requirements.
Large 4.5" display provides convenient work in any applications, and its resolution of "480 by 854" does not allow the eyes of the owner of the smartphone to get tired quickly. The Spreadtrum SC7731 processor operating at a frequency of 1200 Hz and 1024 MB of RAM is responsible for the stability and reliability of the work. Even some modern games without significant lags are played thanks to the built-in Mali-400 MP video adapter.
Support for two SIM cards adds even more appeal to this device. And the eight-megapixel main camera with a built-in flash allows the smartphone owner not to carry a camera, since the quality of pictures and videos is not inferior to ordinary “soap dishes” at all.
Flashing procedure
For this smartphone, official and custom firmware are freely distributed on the network. If the device is unable to start or very often restarts on its own for no particular reason, and there are also system braking, then the following instructions will help, with some effort, to flash the phone on your own.
But if the user is not completely confident in his capabilities, and there is a possibility of making mistakes during the upgrade process, then as a result you can get a “brick”, that is, a completely inoperable device.
There are many methods for carrying out this procedure, for example, use a special "firmware" called "FlashTool". Usually the program is already built into the firmware of the device, and you just need to run it.
One of the most popular modifications for the device in question is the "ZTE Blade GF3 (T320)". It is recommended to download the software from the website of the gadget manufacturer.
Training
First, charge your smartphone battery. Then, if the user is not afraid to risk the device and is confident in his experience, then get root access, and many utilities have already been developed for this:
- Kingo Android Root;
- vRoot;
- Framaroot.
Do a few steps:
- Download and run the installation file, for example, Kingo;
- Then wait for the installation to complete;
- Click "Try";
- After the end of the analysis, press "TRY TO ROOT";
- All. Now proceed to the firmware.
Next, find out the current modification of the OS running in the flashed "GF3". To do this, open the “About phone” tab in the settings, from where write out the name of the system, kernel version and assembly. Then, guided by these indicators, download the appropriate software.
Lacks functionality on purchased Android smartphone ZTE Blade GF3? Do you want to receive root rights on the this smartphone? Website and article receipt Root ZTE Blade GF3 will help you!
What is root?
For those who have just become a beginner or are not an expert in a huge Android world and not particularly familiar with the concept of how - root android, and also why it is needed, what can be done after obtaining Root rights or how to get rid of them later if they are no longer needed, all this can be found in the detailed article -!
Primarily!
There are no "left" links or unnecessary actions in this article! If you really need Root Rights, then read carefully and follow step by step, this is a guarantee that you will do everything right! This article on obtaining Root rights is divided into two parts: The first part is Required Components and conditions, the second part is Instruction how to get root rights using the received files and programs. If in the process getting root android rights constantly rebooting or in progress eternal loading(it happens extremely rarely, but still), it’s worth it. Now let's start getting Root rights!
Android manufacturers sometimes release new firmware on which it is not possible to get Root using one of the suggested methods, if there is more in the article alternative ways, try them. Doesn't work anyway? Specify android version and the firmware version in the comments (do not write malicious shitty comments, you will not put this on yourself or others). Android freezes (does not load), read and re-read from the very FIRST PARAGRAPH, all the necessary links are present in the article!
Do you have any questions?
Still have questions or can't get root access to your Android? Leave comments about what worked for you, what didn't work, or what you did differently.Necessary tools and conditions
How to get Root ZTE Blade GF3
1. Application kingroot reset to device and install. If a similar window appears, allow and continue; 
2. Run just now installed application kingroot; 
3. Press the blue Root button (Start root / Try to root);
4. And wait a couple of minutes while the operation of obtaining root access is performed; 
How to flash ZTE?
The telephone plays an almost integral role in our life. Few people can imagine themselves without a potential source of connection. Thanks to the phone, even being at a distance, we somehow became closer to each other. And as soon as something happens to our phone, we immediately feel like "no hands". In the article we will talk about how to flash a ZTE phone.
Device firmware
You can flash ZTE in several ways, consider the example of the CWM application (you can download it on the website androidp1.ru) for ZTE Blade.
- To get a high-quality result of the work done, it is advisable to use a Gen 2 phone device. If you have a Gen 1 device, you need to download the Swedish Spring RLS4b or CyanogenMod firmware, then with the phone turned off, hold down the "-" and "on" keys, wait for the appearance FTM inscriptions and connect the phone to the computer. Run download_nochecksGen2.exe. and waiting for the complete installation. After that, your phone will receive the Gen 2 version.
- Then we download the necessary new firmware from the Internet, connect the phone cable to the PC and enter Recovery using the "-" and "on" keys.
- If there is no a2sd in the downloaded firmware, then the actions must be started from the point described below, otherwise it is necessary to format the flash by selecting the following actions “advanced” - “partition sd - ext = 512, swap = 0, fat”. If the flash card budget option, then some problems may arise, then try to format it again or replace it.
- Then we go to the action "wipe data / factory reset", "wipe cache partition" or do "wipe battery".
- Next, copy to the flash firmware, but without opening it. In order for the PC to be able to see the smartphone in the CWM program in the main menu "mounts and storage", click on "mount USB storage" and copy everything you need, then click on "unmount".
- Then we go to Recovery "install zip from sdcard" and deal directly with the installation of the firmware.
- After installation, click on "reboot system now" and the phone can be rebooted.
- After rebooting, your phone will display new firmware. This method is only suitable for ZTE Blade, and as for new updates, they can always be obtained through the phone settings.
- If you have done all the steps, and the new firmware was not installed on your phone or was installed incorrectly, then you need to repeat the entire procedure again.
ZTE breakdowns
ZTE phone breakdowns occur in the following cases
- Mechanical violations that can only be eliminated by replacing components or repairing them. This repair is almost impossible to perform at home and requires only the intervention of a service center.
- Firmware replacement.
Why flash your phone?
The phone should be flashed for the following four reasons
- The phone stopped turning on.
- It constantly reboots itself.
- The phone needs to be restored from an unsuccessful firmware.
- There is a desire to install a newer version of the firmware.
More specific information about the brand of phones you are interested in can be found in the section.