How to update the software?
We provide you different ways software updates, namely: updating with a memory card or updating "over the air".
To update "over the air" you need to connect to a wireless network Wi-Fi or GSM Internet connection and check for updates in the settings.
What should I do if the operating time of the device does not match the operating time declared by the manufacturer?
Smartphone is complicated electronic device, which includes the functions of a pocket computer and cell phone and consumes a lot of power to operate these functions. The main amount of energy is spent on the operation of the display module and the GSM transceiver path. The display brightness is automatically set to maximum when it is very bright. environment(sunny day) or set by the user in manual mode. Maximum brightness consumes maximum power. During GSM operation and with stable and stable reception "at the maximum", the device consumes the minimum amount of energy to maintain communication. In the case of unstable and weak signal network, the machine requires more power to maintain communication. In the case of "Network Search" in the area of the absence of a network, the device consumes the maximum amount of energy that is spent on searching for the nearest base stations. To reduce the energy consumed by the phone, you need:
1. Disable GPS if not required.
2. Disable Mobile Internet if it's not needed.
3. Disable or remove unnecessary unused applications, because. they are active and consume the internal resources of the device.
What should I do if the phone freezes, does not turn on or reboots?
The reason for the reboot or freeze in most cases is third-party software or programs.
1. Initially, we recommend that you restore the factory default settings (after saving the information you need). If the phone turns on, select the "factory reset" function in the device menu. If the machine does not turn on, turn on the machine in " recovery mode" and select "wipe data/factory reset". How to enable "Recovery mode" is described below in "How to enter Recovery mode?".
2. If factory reset does not help, update the software. The ways to update the software are described in "How to update the software?".
3. If the software update does not help, contact your nearest Authorized Service center ZTE.
How to do backup save data, notebook or back up?
There are 3 ways to make a "backup":
1. In the phone settings, in the "Backup and Reset" submenu, check the box for recovery.
2. You can transfer necessary information to a computer using USB cable.
3. You can make a "back up" using a third party program.
What to do if I don't remember my password or graphic key to unlock the screen?
If you have forgotten the pattern or digital password to unlock the screen, you need to perform a factory reset procedure: 1. Turn on the device in "Recovery mode" and select "wipe data / factory reset". 2. If the procedure fails, please contact a ZTE Authorized Service Center.
How to use wireless networks (Wi-Fi, BT)?
1. Turn on Wi-Fi in the device settings. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.
2. The device will automatically search for active WiFi networks in the access zone from 5 to 50 meters to the access point (depending on the power of the access point).
3. Select the network you need and click on it. If a wireless network password protected, enter it.
4. After connecting to desired network Wi-Fi icon will appear on the main screen of the device.
How to enable Internet distribution on the phone (USB modem or wifi router)?
There are two ways to enable Internet sharing on your phone. The first way is to turn on the distribution as a USB modem, the other is to turn on the distribution as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:
1. USB modem - the method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings->Wireless networks->More" Modem mode - check USB modem. "Then the phone will start distributing the Internet to the computer. To stop distributing, uncheck the USB modem or simply disconnect the cable connection.
2. WiFi router - make sure you have a stable internet connection via mobile network or USB. "Settings->Wireless networks->More" Modem mode - check the box "WiFI access point". For guard wireless connection click on the hotspot icon then click on Hotspot WiFi access". AT this menu you can set a username and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop the distribution, uncheck "WiFi router"
How can I quickly see the charging status?
While charging, press the power button. The battery charge status will be shown on the phone's main screen.
Why is the amount of free memory of the device less than stated by the manufacturer?
Unlike the processor, which has its own built-in memory, other devices, such as a video processor, an audio processor, and other devices included in the element base of the device's central board, consume user memory resources. Some memory is pre-reserved for internal needs, but in case of overflow, user memory is used.
What types of machine lock can be used?
There are 3 types of screen lock. Select one of the lock types in Settings -> Security -> Screen lock.
1. Pattern lock
2.PIN lock 3.Password lock
What is the operating temperature of ZTE phones?
The operating temperature is in the range from (-10C) to (+50C).
What does ROOT mean?
ROOT is "administrator rights". ROOT allows you to change system files, modify the system, install test programs and perform other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling ROOT rights may harm your operating system.
How to enter recovery mode?
In the off state, hold down the volume button (increase +) and the power button at the same time.
What to do if the battery is not 100% charged?
The battery of the device is designed in such a way that it dissipates part of the received charge and can subsequently be charged again. This feature is designed to protect the battery and increase its performance. If the battery does not charge more than 80%, contact a ZTE Authorized Service Center.
How can I add Google account into the machine?
1. When you turn on your smartphone for the first time, you will be prompted to register a new Google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time, you can register a new one or use existing account: Settings->Accounts and "add account".
How to enable USB debugging? How to get access to the "For Developers" menu?
Enter "Settings->About Phone->Press the "Build number" several times. Then you will be able to access the "For Developers" submenu. In this submenu, "USB debugging" and other functions for developers are available
How to connect phone to PC?
To install the driver (automatically), do the following.
1. Connect your phone to your computer.
2. When connecting, select " Virtual Disk" or "Virtual CD" depending on the model.
3. The computer must determine additional disk, run "Autorun.exe" on it and install the driver
4. If the drivers are not installed, go to "Settings->For Developers" and enable the "Disk driver". (10 times click on "Build version"
5. When enabled (USB debugging), the driver will also be automatically installed.
What do the letters E, G, H stand for?
When data transfer is active on the phone, the following symbols appear on the status bar (indication of signal reception, battery capacity, etc.):
- E means active operation of the EDGE protocol
- G means active operation of the GPRS protocol
- H means active operation of the HSDPA protocol, which is part of WCDMA
Don't know how to flash Android? We will tell how to update firmware on ZTE Geek 2 LTE. We have written detailed instructions for you.
Why update the firmware on Android
Everyone's motives are different, but mostly to eradicate some problems with the phone.
- Problem with front or rear camera.
- The problem with the response of the display, more specifically, with the speed of response.
- I want to understand what the new Android is.
- Tired of the old android version, I want to expand the functionality.
- The smartphone does not turn on or is terribly buggy.
- The phone stopped charging.
- First you need to download the firmware by selecting one of the options below. Together with it in the archive, the necessary set of programs (TWRP and others).
- Then extract the file "instruction_rootgadget.txt" from the archive. Using the archiving program
- The firmware zip file in the archive must be downloaded to a memory card or smartphone memory.
- For other information and sequence of actions, see the text instructions.
Firmware ZTE Geek 2 LTE
Choose what you like, but it's best to download the most modern versions, there are more optimized power consumption and other joys of life.
- Android Pie 9.0 - you can say the flagship OS, but still a little unfinished
- 8.0 Oreo is a great option, minimal bugs and rich functionality, but version 9 is certainly better.
- 7.0 Nougat is a stable version in all respects, it works even on low-powered hardware.
- 6.0 Marshmallow - 5 and 6 versions are already a real junk, although they were once the pinnacle of progress. But if you switch to them from version 3 or 4, then of course the difference is very noticeable.
Root rights
If you want to get root access, you can use the universal program Rookthp Pro 2.4, Website address: rootkhp.pro. Instructions for using the program can be found. And also from universal we can advise ZYKUroot version 2.2. You can find information about it at zykuroot.info
About more popular programs and we won’t talk, the same Kingo and Framaroot are always well-known, although they are losing ground a little
ZTE Geek 2 Pro- it's branded chinese smartphone, which received 3 points for performance. Here you can download firmware (for all operators, firmware ROM), learn how to reset settings or get root. There are also instructions on ZTE. This smartphone is quite productive. On board has - MediaTek MT6592M, 1400 MHz
Root on ZTE Geek 2 Pro
How to get a root for ZTE Geek 2 Pro see instructions below.
Initially, try the universal utilities for getting root on MTK for Geek 2 Pro model
- (root in one click)
- (a collection of root utilities in one)
If it didn’t work out and SuperUser didn’t appear, then ask for help in a special topic
Characteristics
- Type: smartphone
- Operating system: Android 4.4
- Case type: classic
- Control: touch buttons
- Number of SIM cards: 2
- Multi-SIM Operation Mode: Alternate
- Weight: 130 g
- Dimensions (WxHxD): 69.8x139.3x7.8mm
- Screen type: color IPS, 16.78 million colors, touch
- Type of touch screen: multi-touch, capacitive
- Diagonal: 5 inches.
- Image size: 800x1280
- Automatic screen rotation: yes
- Type of ringtones: polyphonic, MP3 ringtones
- Vibrating alert: yes
- Camera: 13 million pixels, LED flash
- Camera Features: Autofocus
- Video recording: yes
- Max. video resolution: 1920x1080
- Max. video frame rate: 30fps
- Front camera: yes, 5 million pixels.
- Audio: MP3, FM radio
- Dictaphone: yes
- Headphone Jack: 3.5mm
- Standard: GSM 900/1800/1900, 3G
- Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, HSPA+
- Interfaces: Wi-Fi 802.11n, Bluetooth 4.0, USB
- USB host: yes
- Satellite navigation: GPS
- Protocol support: POP/SMTP, IMAP4, HTML
- Processor: MediaTek MT6592M, 1400 MHz
- Number of processor cores: 8
- Built-in memory: 8 GB
- Volume random access memory: 1 GB
- Memory card support: microSD (TransFlash)
- Additional SMS features: text entry with dictionary
- MMS: yes
- Battery capacity: 2300 mAh
- Sensors: light, proximity
- Book search: yes
- Exchange between SIM card and internal memory: there is
- Organizer: alarm clock, calculator, task planner
Review ZTE Geek 2 Pro
The phone, in principle, is not bad if you look at the branch of budget phones. Cool design, good cameras, generally clear pictures on the street, little memory for applications, but I think everyone Chinese phones such a disaster. Communication catches on 3+ too many junk applications that cannot be deleted without root. And so everything is fine, he took his wife she liked it.
»Firmware for ZTE Geek 2 Pro
√ Official firmware for TWRP-
√ Stock firmware for SP Flashtool -
√ Firmware Geek_2_ProV1.0.0B06 -
√ Custom firmware MIUI v8 7.2.23 -
Firmware for ZTE Geek 2 Pro you can find in the branch In addition, first download the necessary software for flashing
What information do you need to know for flashing?- Brand/Model [Preferred] - ZTE/Geek 2 Pro
- Processor - MediaTek MT6592M, 1400 MHz
- LCD Driver (Version)
- Kernel (version) [preferred]
Before flashing and in the process of selecting firmware, check the base TX ( specifications) through the program
What are custom firmware (firmware)?
- CM - CyanogenMod
- lineageOS
- paranoid android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- flymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and disadvantages of a smartphone from ZTE and how to fix them?
- If the Geek 2 Pro does not turn on, for example, see White screen, hangs on the screen saver, or the notification indicator only blinks at all (possibly after charging).
- If it freezes when updating / freezes when turned on (requires flashing, 100%)
- Not charging (usually, hardware problems)
- Can't see sim card
- The camera does not work (for the most part, hardware problems)
- Sensor not working (depending on the situation)
Hard Reset for ZTE Geek 2 Pro
- Settings->Backup & Reset
- Reset settings (at the very bottom)
How to reset pattern
How to reset the unlock pattern if you forgot it and now you can't unlock your smartphone. On Geek 2 Pro key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
How to update the software?
We provide you with different ways to update the software, namely: update using a memory card or update "over the air".
To update "over the air" you need to connect to a wireless network Wi-Fi or GSM Internet connection and check for updates in the settings.
What should I do if the operating time of the device does not match the operating time declared by the manufacturer?
A smartphone is a complex electronic device that includes the functions of a pocket computer and a cell phone and consumes a large amount of power to operate these functions. The main amount of energy is spent on the operation of the display module and the GSM transceiver path. Display brightness is automatically set to maximum in very bright environments (sunny day) or set manually by the user. Maximum brightness consumes maximum power. During GSM operation and with stable and stable reception "at the maximum", the device consumes the minimum amount of energy to maintain communication. If the network signal is unstable and weak, the machine needs more power to maintain communication. In the case of "Network Search" in the network absence area, the device consumes the maximum amount of energy that is spent on searching for the nearest base stations. To reduce the energy consumed by the phone, you need:
1. Disable GPS if not required.
2. Disable mobile internet if not needed.
3. Disable or remove unnecessary unused applications, because. they are active and consume the internal resources of the device.
What should I do if the phone freezes, does not turn on or reboots?
The reason for the reboot or freeze in most cases is third-party software or programs.
1. Initially, we recommend that you restore the factory default settings (after saving the information you need). If the phone turns on, select the "factory reset" function in the device menu. If the device does not turn on, turn on the device in "Recovery mode" and select "wipe data / factory reset". The method of switching to "Recovery mode" is described below in the paragraph "How to enter Recovery mode?".
2. If factory reset does not help, update the software. The ways to update the software are described in "How to update the software?".
3. If the software update fails, contact your nearest ZTE Authorized Service Center.
How to backup data, notebook or "Back up"?
There are 3 ways to make a "backup":
1. In the phone settings, in the "Backup and Reset" submenu, check the box for recovery.
2. You can transfer the necessary information to your computer using a USB cable.
3. You can make a "back up" using a third party program.
What should I do if I do not remember the password or pattern to unlock the screen?
If you have forgotten the pattern or digital password to unlock the screen, you need to perform a factory reset procedure: 1. Turn on the device in "Recovery mode" and select "wipe data / factory reset". 2. If the procedure fails, please contact a ZTE Authorized Service Center.
How to use wireless networks (Wi-Fi, BT)?
1. Turn on Wi-Fi in the device settings. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.
2. The device will automatically start searching for active Wi-Fi networks in the access area from 5 to 50 meters to the access point (depending on the power of the access point).
3. Select the network you need and click on it. If the wireless network is password protected, enter it.
4. After connecting to the desired network, the Wi-Fi icon will appear on the main screen of the device.
How to enable Internet distribution on the phone (USB modem or WiFi router)?
There are two ways to enable Internet sharing on your phone. The first way is to turn on the distribution as a USB modem, the other is to turn on the distribution as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:
1. USB modem - the method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings->Wireless networks->More" Modem mode - check USB modem. "Then the phone will start distributing the Internet to the computer. To stop distributing, uncheck the USB modem or simply disconnect the cable connection.
2. WiFi router - make sure you have a stable internet connection via mobile network or USB. "Settings->Wireless networks->More" Modem mode - check the box "WiFI access point". To secure your wireless connection, click on the hotspot icon, then click "WiFi Hotspot". In this menu, you can set a name and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop the distribution, uncheck "WiFi router"
How can I quickly see the charging status?
While charging, press the power button. The battery charge status will be shown on the phone's main screen.
Why is the amount of free memory of the device less than stated by the manufacturer?
Unlike the processor, which has its own built-in memory, other devices, such as a video processor, an audio processor, and other devices included in the element base of the device's central board, consume user memory resources. Some memory is pre-reserved for internal needs, but in case of overflow, user memory is used.
What types of machine lock can be used?
There are 3 types of screen lock. Select one of the lock types in Settings -> Security -> Screen lock.
1. Pattern lock
2.PIN lock 3.Password lock
What is the operating temperature of ZTE phones?
The operating temperature is in the range from (-10C) to (+50C).
What does ROOT mean?
ROOT is "administrator rights". ROOT allows you to change system files, change the system, install test programs and perform other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling of ROOT rights can harm your operating system.
How to enter recovery mode?
In the off state, hold down the volume button (increase +) and the power button at the same time.
What to do if the battery is not 100% charged?
The battery of the device is designed in such a way that it dissipates part of the received charge and can subsequently be charged again. This feature is designed to protect the battery and increase its performance. If the battery does not charge more than 80%, contact a ZTE Authorized Service Center.
How can I add a Google account to the machine?
1. When you turn on your smartphone for the first time, you will be prompted to register a new Google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time, you can register a new or use an existing account: Settings->Accounts and "add account".
How to enable USB debugging? How to get access to the "For Developers" menu?
Enter "Settings->About Phone->Press the "Build number" several times. Then you will be able to access the "For Developers" submenu. In this submenu, "USB debugging" and other functions for developers are available
How to connect phone to PC?
To install the driver (automatically), do the following.
1. Connect your phone to your computer.
2. When connecting, select "Virtual Disk" or "Virtual CD" depending on the model.
3. The computer should detect an additional disk, run "Autorun.exe" on it and install the driver
4. If the drivers are not installed, go to "Settings->For Developers" and enable the "Disk driver". (10 times click on "Build version"
5. When enabled (USB debugging), the driver will also be automatically installed.
What do the letters E, G, H stand for?
When data transfer is active on the phone, the following symbols appear on the status bar (indication of signal reception, battery capacity, etc.):
- E means active operation of the EDGE protocol
- G means active operation of the GPRS protocol
- H means active operation of the HSDPA protocol, which is part of WCDMA
ZTE Geek 2 LTE- This is a branded Chinese smartphone that received 5 points in performance. Here you can download firmware (for all operators, firmware ROM), learn how to reset settings or get root. There are also instructions on ZTE. This smartphone is high performance. On board has - Qualcomm Snapdragon 400 MSM8926, 1200 MHz
Root on ZTE Geek 2 LTE
How to get a root for ZTE Geek 2 LTE see instructions below.
Below are universal programs to get root rights for devices on Qualcomm Snapdragon
- (needs a PC)
- (Root using PC)
- (popular)
- (root in one click)
If the rights of the superuser (root) could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.
Characteristics
- Type: smartphone
- Operating system: Android 4.4
- Case type: classic
- Body material: polycarbonate
- Control: on-screen buttons
- SIM card type: micro SIM
- Number of SIM cards: 1
- Weight: 130 g
- Dimensions (WxHxD): 70x140x7.7 mm
- Screen type: color TFT, touch
- Touch screen type: multi-touch, capacitive
- Diagonal: 5 inches.
- Image size: 720x1280
- Number of pixels per inch (PPI): 294
- Automatic screen rotation: yes
- Type of ringtones: polyphonic, MP3 ringtones
- Vibrating alert: yes
- Camera: 8 megapixels, LED flash
- Camera Features: Autofocus
- Video recording: yes
- Geo Tagging: yes
- Front camera: yes, 1 million pixels.
- Audio: MP3, FM radio
- Dictaphone: yes
- Headphone Jack: 3.5mm
- Standard: GSM 900/1800/1900, 3G, LTE
- Support for LTE bands: bands 3, 7, 20
- Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, HSPA+
- Interfaces: Wi-Fi 802.11n, Bluetooth 3.0, USB
- Satellite navigation: GPS/GLONASS
- Protocol support: POP/SMTP, IMAP4, HTML
- DLNA support: yes
- Processor: Qualcomm Snapdragon 400 MSM8926, 1200 MHz
- Number of processor cores: 4
- Video processor: Adreno 305
- Built-in memory: 16 GB
- RAM: 1 GB
- Memory card slot: no
- Additional SMS features: text entry with dictionary
- MMS: yes
- Battery capacity: 2300 mAh
- Sensors: light, proximity, compass
- Book search: yes
- Exchange between SIM-card and internal memory: yes
- Organizer: alarm clock, calculator, task planner
»
Firmwares for ZTE Geek 2 LTE
Official android firmware 4.4 [stock ROM file] -
Custom ZTE firmware -
ZTE Geek 2 LTE firmware can be implemented in several ways. If the firmware file has not been uploaded here yet, then create a topic on the forum, in the section, experts will help you and add firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. The official ZTE website, unfortunately, will not help to solve this problem, and we will solve it for free. This ZTE model has a Qualcomm Snapdragon 400 MSM8926, 1200 MHz on board, respectively, there are such flashing methods:
- Recovery - flashing directly on the device
- A special utility from the manufacturer, or
What are custom firmware (firmware)?
- CM - CyanogenMod
- lineageOS
- paranoid android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- flymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and disadvantages of a smartphone from ZTE and how to fix them?
- If Geek 2 LTE does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification light only blinks at all (perhaps after charging).
- If it freezes when updating / freezes when turned on (requires flashing, 100%)
- Not charging (usually, hardware problems)
- Can't see sim card
- The camera does not work (for the most part, hardware problems)
- Sensor not working (depending on the situation)
Hard Reset for ZTE Geek 2 LTE
Instructions how to do hard reset on ZTE Geek 2 LTE (factory reset). We recommend that you familiarize yourself with the visual guide, which is called on Android. . 
Reset codes (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off the device-> go to Recovery
- "wipe data/factory reset"
- "yes - delete all user data" -> "Reboot System"
How to enter Recovery?
- hold and hold Vol (-) [volume down], or Vol (+) [volume up] and the power button (Power)
- a menu with the Android logo will appear. That's it, you are in Recovery!
Reset settings on ZTE Geek 2 LTE can be done in a very simple way:
- Settings->Backup & Reset
- Reset settings (at the very bottom)
How to reset pattern
How to reset pattern if you forgot it and now you can't unlock your ZTE smartphone. On the Geek 2 LTE model, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -