Did you know that the very word "headphones" is synonymous with the term "headphones"? Apparently, this name arose due to the fact that the English headphones (head - head, phone - telephone) were literally translated. And only then did they begin to use the much simpler and more convenient word “headphones”.

Today, almost every one of us has this device - in the old days we used headphones only to listen to music, but today they have turned into a full-fledged headset, with which you can even communicate with a person by phone or in any other way. voice communication e.g. Skype.

The only negative of the headphones is the quality. Yes, even the most expensive device can fail at the most inopportune moment, which many of you have probably experienced more than once. In this case, often the problem lies not in the headphones themselves, but in the device to which they were connected. And I will prove it to you.

Headphones do not work in the phone or in the player

Imagine that you have inserted headphones into the jack on your phone or player? but the following happens:

• Strange sounds appear when playing a file extraneous noise, rustles, crackles.

• In order for the sound to be normal, you have to constantly keep your hand near the connector.

• Only one earphone can work, and the second works intermittently.

If you are experiencing one of the problems described, then with 99% certainty the problem lies precisely in the headphones themselves. To make sure of this, connect them to any other sound source (phone, TV, computer, etc.). If there is no noise in this case, then yes, it's the headphones. What to do? If the headphones are relatively new and have a warranty, go to the store and demand a replacement - you have every right to do so. If there is no guarantee, then the choice is small - either we solder the existing headphones from a specialist (and the problem is probably in the plug or wire), or we buy new ones. It all depends on the cost of repairs, well, attachment to the device itself. By the way, you can solder the wires with the plug yourself, fortunately, there are a lot of schemes for this on the Internet.

If, after connecting the headphones to another device, the sound in them is restored, then the matter is in the phone itself (or the player), namely:

• The headphone jack may have been damaged. This happened, probably due to mechanical damage.

• Contacts inside the case of the device could be oxidized, and a short circuit could also occur.

• Perhaps the problem is related to the device board. You can't do without opening and analyzing.

• Finally, the problem may be related to software gadget, that is, with its firmware.

What to do? To begin with, we try to restart your device and if this does not help, then we reflash it. Also put the device on charge - oddly enough, but it can work. If nothing helps, contact service center to test the device for problems.

Headphones not working on laptop or computer

Well, we figured out mobile devices, now we are moving on to more “large” devices.

I'll start with one very common problem - there is no sound when you connect headphones on the front panel system block. And everything is solved in a simple way:

• The front output is simply not connected at the system level. To do this, you need to open the program for sound settings (in my case, this is realtek dispatcher HD - there is its icon in the tray). In the settings it is possible to connect the output on the front panel - check the box and click OK. After that, the sound will appear.

• If this does not happen, then you can try changing the default device in the sound settings. To do this, go to the control panel and in the "Sound" section, change the default device to another.

• Finally, it is quite possible that the front connector is not corny connected to motherboard. To connect it, you need to disassemble the system unit.

We figured out the front panel. Now let's move on to other possible problems.

• If you made sure that the headphones work on another device, but the computer does not produce any sounds, then it's definitely the PC. In this case, I recommend updating your drivers. Personally, I have often encountered a situation where they simply disappeared or turned off. I don’t know what this is connected with, but the fact is the fact, and this happened both on Windows XP and on Windows 7 (I hope, on version 8 operating system this issue has been resolved). As usual, we download drivers only from the official site.

• What else? We also look at the sound level in the system. Perhaps it is simply reduced and this is the problem. We add sound using the tray icon or through the control panel.

In general, friends, trying to revive the sound is worth a try, because often the headphones are in working order, and the problem is related to the system. There is always a chance.

One of the few breakdowns where the reason why Android does not see the headphones can be equally physical damage and software errors.

Headphones not visible in Android due to software glitches

Most smartphone and tablet owners use third party applications that are downloaded from Google Play. Although recently Google has become more closely monitor the posted content, there are still many low-quality, underdeveloped and simply malicious applications disguised as audio and video players.

Sometimes a crash when Android does not see the headphones happens even due to fully functional programs due to accumulated errors, lack of memory. In order to clean the system yourself, you can perform the following steps.

1. Do full reset (hard reset). Pre-save all valuable data from your phone or tablet, then go to settings, where you can choose to clean up the system by deleting all data in memory. You will receive the gadget “out of the box”.
2. If Android still doesn't recognize the headphones, use one of the malware-cleaning utilities. Good program from Google Play - Multi Cleaner. The utility does a good job of "catching" viruses, trojans, simply low-quality, "buggy" programs, it can clean the system of applications and files that cause errors.
3. The gadget still does not detect the headset? There is an error when working with the microphone, nothing helped? Then you have to do a flashing of the device - complete reinstallation Android systems in the device. If you do not have experience, it is advisable to contact a repair shop, advanced users They can try to reflash the device on their own.

When you connect a headset to modern devices, the sound usually turns on automatically. If this did not happen, the cause should be sought not only in the malfunction of the accessory or phone, but also in system failures. Our article will tell you what to do if the headphones do not work on your Android phone.

The first thing that comes to mind in such situations is to check the performance of the headphones. To do this, you can connect the headset to another device, as well as visually assess the integrity of the plug and wires. Mechanical damage it is quite difficult to fix it yourself, it is easier to buy new headphones. If the problem lies in a kink in the wire or dirt on the plug, the gadget's function can be restored with a greater degree of success.

Other possible problems:

1. Use of non-original products. Many manufacturers reserve the ability to dictate their own rules, so the device will not connect to fake headphones, but only to the original sample. Even if your gadget "sees" the device, it will not be able to work with it.
2. Application regular headphones for the talk function. It is more expedient to use a special headset with a microphone, because in ordinary ones, designed for listening to music, there will be no opportunity to answer the call.

Of course, it is not always possible to purchase original products that are perfectly compatible with your device. By the way, now most smartphone manufacturers do not complete their devices with this necessary accessory (previously, headphones were included in the kit even for budget phones). You can fix the situation simple rule: Be sure to test the purchased products directly in the store and with your device. If the headphones "fit", the risk of problems in the future is minimal.

Phone breakdowns

One of the most common factors in the “rejection” of a headset by a smartphone is the loosening of the connection jack. The sound in this case may be of poor quality, interrupted regularly, or absent altogether. Repair such a breakdown can be in the service center, and for a fairly reasonable fee. Usually, models of budget gadgets “sin” with such a disadvantage, but there are exceptions.

By the way, the user can also cause the input jack to malfunction. This may be not too careful operation of the phone, constant jerks when using headphones, or pulling the device out of your pocket or bag by the wires. All this will quickly affect the functionality of the device and can lead to the plug slipping out even in a free state.

You should not completely exclude the possibility of a factory defect of the device. In this case, it is more advisable to immediately contact the service center while the smartphone is under warranty. By the way, some older phones do not support the use of a wired headset with a microphone due to technical features. You can listen to music on such devices, but answer the call only when using a wireless headset. Despite this inconvenience, such gadgets are distinguished by a very successful assembly and are still in demand. An example of such a successful combination is a telephone Samsung models S5300 based on Android 2.3 OS, as well as many devices in the line of this release.

What to do: Android does not see headphones

A popular reason why headphones do not work on Android can be the use third party programs to play music. Typically, standard media players do not have high sound quality, and also have inconvenient menus and other disadvantages of settings. Correcting the situation is quite simple, just download the appropriate application or Google Play. At the same time, this solution increases the chances that your smartphone simply will not see the connected headset or will not be able to work with it. If a similar problem arose exclusively when playing music files on one of the installed players, then you need to check its settings and allow access to the headphones you are using.

What to do if the headphones do not fit the phone

When Android does not see the headphones, the problem should also be looked for in the factory settings, or rather, among possible software failures before installed applications. If the device has stopped detecting previously used headphones, it is worth considering and eliminating the following negative factors.

Why do situations like this happen?

• The virus infection of the phone "touched" this function, among others. The solution to eliminate is the active "treatment" of the smartphone.
• There are many installed applications, the work of which in one way or another interferes with the normal playback of sound in the media library. How can I help you? Eliminate a possible threat by removing or deactivating the software. You can check for possible failures by switching the smartphone to “safe mode”.
• Congestion internal memory may also adversely affect some functions of the device. The solution is to clean the phone regularly, keep apps on external drive, or removing outdated software.
• As a last resort, if such system failures are critical and interfere with the operation of other device functions, you should reset the device to factory settings or flash the device to eliminate the possibility of recurring failures in the future.

If listening to music with headphones on your phone has become a lottery with doubtful chances of success, it's time to take a closer look at this issue. There can be many reasons why Android does not see headphones, and we are talking not only about headset malfunctions, but also system errors. Our article will tell you what to do in such cases and how you can avoid such troubles.

Why does the phone not see the Bluetooth headset? Questions like this come up quite often. The fact is that for many years the wireless headset has been in great demand. After all, it is very convenient, especially for drivers. Moreover, the rules traffic It is forbidden to talk on the mobile while driving. That's what wireless headphones are for. We wrote about how to listen to music through a Bluetooth headset in. But despite this, many users do not know how to use it.

To do this, you need to know some features and rules of application. Moreover, you must first pair the devices. In other words, add wireless equipment to the list of connections on your smartphone. At the same time, in order to avoid certain inconveniences, after you have synchronized the devices, the headset will no longer be detected by other mobile phones. If you don't know How to use a Bluetooth wireless headset, please read.

There may be several reasons for this:

• The headset is simply not included.
• The sync function is not enabled.
• Battery low.

As you can see, there are not so many reasons why the phone does not see the Bluetooth headset. And all of them are connected equipment. The fact is that on mobile devices (tablets, smartphones, and so on) there are practically no settings. You can only turn the Bluetooth adapter on or off and enable discovery.

What to do if the phone does not see the Bluetooth headset: Video

How to connect a wireless headset

So, before moving on to the question of why the phone does not find the Bluetooth headset, you should figure out how to sync and connect. As a rule, when you turn on the headphones for the first time, they will automatically activate the detection function. That is, for example, a smartphone or tablet easily finds new equipment available for connection.

But, if earlier the headphones were paired with another smartphone, then the pairing function on them is disabled. In such a case, you need to press and hold the power button for about 10-15 seconds.

There can be no other reasons, since there are no settings. Moreover, all Bluetooth devices operate on the same frequency range, so there is no division by manufacturer brand. If you have a tablet, maybe it will be useful for you.

How to connect Bluetooth headphones to a computer: Video

So, the phone does not see the bluetooth headset. In this case, the brand of the headset or phone is not important. The Bluetooth communication standard is universal and if there are problems with the visibility of devices, there can be only three reasons for the problems.

Bluetooth not enabled on phone/tablet

This is the first thing to check in such a situation. Go to the phone settings and make sure that Bluetooth is activated and the visibility time of the device is set correctly.

Visibility time is set to advanced settings. In some phone models, they are called "Device visibility time", and somewhere "Detection timeout". It is best to check the "Do not use timeout" option. If after changing the settings, the connection of the bluetooth headset did not happen, check two more options.

Headset is not turned on or is out of power

In some headsets, the power button must be held down for at least five seconds to start the working mode. When the device is working, the indicator light will blink. After that, you don't need to do anything. All modern bluetooth headphones connect to the phone automatically.

If you press the button long enough and there is no answer, the headset is either low on power or is defective. Please note that even a new Bluetooth headset may have an empty battery. Batteries lose their charge if they lie idle for a long time. When charging does not help and the new headset does not turn on, you need to change it from the seller.

The headset has already been paired with another device

Sometimes a bluetooth headset, which has already been tested many times with another gadget, does not connect to a new phone. The fact is that the headset is connected to the first device automatically, and then the pairing function is turned off. To activate it again, you need to hold the power button until the indicator lights up. A window will appear on your phone to enter the pairing code. The factory code adopted by manufacturing companies is 0000, four zeros.

These are the main reasons why the phone does not see the Bluetooth headset. Due to the fact that such accessories do not have complex settings, there are no other reasons for malfunctions.

How to connect bluetooth headset to phone

Consider connecting a bluetooth headset using Partner accessories as an example.
The instruction is simple:

1. Press the power button and wait for the light signal.
2. Turn on Bluetooth on your phone and search for "Partner BT" device.
3. Connect and use.

There are quite a few reasons why the phone does not see the headphones. The problem may lie in an incorrectly selected Bluetooth protocol (bluetooth), a technically faulty connector, a phone firmware failure, or even in a different design. Synchronization problems can sometimes be fixed on your own, but first you need to carry out a simple diagnosis and establish what the breakdown is hiding in.

Device Diagnostics

Initially, the user wants to understand what to do next if the phone does not see a headset or headphones. You need to figure out which device to look for the problem in: headphones or phone. This must be done even if you plan to see a specialist later.

Diagnosis at the initial stage can be elementary.

1. Connect potentially faulty headphones to any other device: player, computer, TV. If they function, then the problem is in the phone.
2. Install other headphones in the mobile phone, check. If the accessory works in the normal mode, then the socket and contacts of the phone connector are working.
3. If you have Bluetooth headphones, try pairing them with another Bluetooth device and see if pairing or discovery occurs.

Connecting headphones to the player

Device Compatibility

Among other reasons not related to software, one can single out the problem of incompatibility of the accessory with gadgets. Technically headphone jack is different:

• mono connector with two pins;
• stereo connector with three pins;
• stereo connector with a headset, where there are four pins.

The phone does not see the wrong accessory, but such situations are rare. Usually, modern technology has the maximum potential, that is, it has 4 contacts with the ability to connect a headset.

There are designs where the contacts are “rearranged”, which will also lead to the fact that the phone does not see the headphones. It's simple here: many companies develop things like headphones, microphones or headsets exclusively for their products. This is cost-effective, because the user will buy more products of the same brand, although forced.

iPhone 7 and Lightning headphones

Average companies, due to competition, do not take such measures, it is rather a privilege of leading manufacturers in their industry.

Second moment - products poor/unstable quality, as a rule, these are cheap Chinese (sometimes Taiwanese) headphones without a specific brand. If the company does not follow the production, uses foreign technologies, then as a result the user receives products with unpredictable technical characteristics. And in this, and in the previous case, the accessory will be serviceable.

Technical problems with headphones

One of the most common problems is wire break to one of the headphones. You can tell what works here. protective function, and the phone stops seeing the headphones or playing sound. You can troubleshoot after visual inspection, but a hidden fracture can only be determined using devices that work on the principle of a multimeter.

Damaged headphone wire

Before breakdowns of this kind, one of the headphones may not work correctly:

• extraneous noises, wheezing;
• intermittent loss of sound.

If you move the wires along the entire length, it is possible that a sound will appear, which will indicate the location of the fracture. Repair in this case will be simple: open the insulation, restore the wiring, fix it with electrical tape or heat shrink.

The second most common problem is plug contamination. It must be inspected and cleaned, then reconnect the headphones to the phone.

A headset or headphones, like any small appliance, can fail. In this case, the accessory will not function in any other devices. Naturally, connecting them to the phone several times is pointless, it will not recognize them.

Technical problems with the phone

If the diagnostics found that the headphones are working, but they cannot connect to the gadget, we are looking for a malfunction in the phone. Here is the weakest point jack socket. Over time, it can become dirty, a broken wire will become a more difficult breakdown. If excess debris and dust is easy to remove, then to restore contact, you need to open the phone.

It's important to know! Warranty service will be void if the device has been opened unauthorized or by a third party workshop. The best option is to take the phone to an authorized service.

In order to check the wires, you need to turn off the phone, remove the SIM cards, battery and all memory cards. Next, all the screws are unscrewed, a plastic cover is pry off with a flat screwdriver. If the socket is broken, it must be replaced. It is worth noting that an inexperienced master can easily damage other components of fragile electronics, as a result, repairs will rise several times over. It is not recommended to resort to self-repair if it is possible to contact a specialist who will take responsibility.

Other problems include oxidation of the connector wires or a short circuit. In the most difficult situations, the breakdown of the phone board becomes the cause.

Problems with wireless headphones

Modern and popular wireless accessories are convenient, but they are the most difficult for many users. They connect using built-in Bluetooth modules.

First of all, you need to check again if the module is activated, as well as the time of its activity. Some imp wired headphones or headsets after pairing with one device may not connect to others. You can start the operating mode by holding the power button for 5-10 seconds, after which the device will give a light signal. Further synchronization should take place in automatic mode, but it may need to be done manually. Sometimes, after holding the power button, Bluetooth headphones may request synchronization code, the factory default password is 0000.

It's important to know! Be sure to check the battery level. When discharged, the headset will not turn on, therefore, the phone will not be able to recognize them.

The second "software" problem, why the phone does not see the headphones, is outdated firmware version. This can happen regardless of the operating system, be it Android or IOS. You can update it in the workshop or yourself. If you do not have experience, it is better to trust a specialist.

A Bluetooth headset is an indispensable thing for people who spend a lot of time talking on an Android phone. It allows you to leave your hands free while on a call, and is especially useful for motorists who are constantly on the move or just to make communication more comfortable.

Headset allows users to always stay connected

Many of us, when buying a hands-free accessory, do not know how to connect a bluetooth headset to the phone. It's actually quite easy to do, so let's find out how to establish a connection quickly and independently.

Headset connection

How to set up a bluetooth headset on Android or devices of other brands? Before connecting it, make sure that your smartphone has a Bluetooth function - in principle, it is in any modern gadget. It is also desirable that both devices are charged so that the bluetooth connection process is not interrupted if the phone or headset runs out of power.

So, pairing an Android phone or any other system and a Bluetooth headset is as follows:

• Turn on the hands-free accessory, activate the Bluetooth function on the phone - you will find it in the Settings, regardless of the manufacturer or system on the gadget;
• Now on the bluetooth headset you should find the function key, which will put it into pairing mode. In most cases, you need to hold down the main key and hold it for a few seconds. If the LED began to flash in different colors after turning on and pressing the button, it means that it has switched to pairing mode;

Note! Often, if you just bought a bluetooth headset, and it has not been used to connect before, you can not put it in the pairing state, but simply turn it on - the first time it is automatically configured in this mode. However, if you were unable to pair it with your Android phone in this way, use the above recommendation.