In this manual, I want to tell you in detail how through the address my.keenetic.net log in to master settings Keenetic router . Not so long ago, these devices were produced under the Zyxel brand, but recently they have become a separate brand. Since the firmware for all models is the same, respectively, and Personal Area the user is practically the same. That's why, this instruction will be relevant for Keenetic Start WiFi routers, Keenetic Lite, Keenetic City, Keenetic Air, Keenetic Giga KN-1010, Keenetic Ultra KN-1810 and others.
If you turn the device upside down, you will see a sticker on its bottom cover. It will contain the line: Setting - my.keenetic.net. That is, if you want to go to the router settings - enter this address in address bar browser. In the same way as you enter the addresses of sites on the Internet there. In response to this, the web configurator of the router should open for you. It is also often called the web interface or personal account of the Kinetic router. At their core, all three names represent the same thing - a set of device settings, presented in the form of a website. Therefore, beginners call the web configurator "router site".
If you pick up some old Ziksel Kinetic, even from the first models, then IP will be written on the sticker. Why is it now written instead of a symbolic address my.keenetic.net?! I'll tell you a little secret - both options are correct! It’s just that recently, for the convenience of users, manufacturers have begun to everywhere introduce access to the router settings not by IP, but through a symbolic name. It is easier and more understandable for an unprepared person.
Entering the settings of the Kinetic router
In order to enter the Keenetic router setup wizard, you need to connect to it using a LAN cable or via a wireless WiFi network. The latter is very convenient if you want to configure the router from a tablet, phone or laptop. Although, if there are problems with access, you still have to pick up through the cable.
Open any web browser and enter the address in the search bar: my.keenetic.net.
If there are no problems with the settings and operation of the device or computer, then a page with fields for entering a login and password should open.
By the way, if you notice that the address has changed to keenetic.io Don't be surprised, this is normal. Next, you need to enter your login and password for authorization.
How to connect to a Keenetic router
There are two ways to connect to WiFi router Kinetic - via cable and wireless network. Let's consider both options.
Connecting Kinetics via cable
Complete with any WiFi router comes with an ethernet cable. With it, you can connect the device to a computer or laptop via a LAN port. To do this, you need to connect one end of the cable to any of the yellow connectors of Kinetics, signed as "Home network":
Connect the other end of the cable to the LAN port network card computer. As a rule, all modern PCs and laptops have a built-in motherboard network controller, so you should not have any problems!
WiFi connection
You can also access the router settings through my.keenetic.net through a wireless network. To do this, you need to know the name of this network (WiFi SSID) and the password to connect to it. If you have not changed anything in the device configuration before, then you can find out these parameters simply by turning the Kinetic upside down.
There will be a sticker in which in the box " WiFi network" will be the name wireless network, and in the "Wi-Fi Password" field, respectively, the security key.
If you want to login to my.keenetic.net from your tablet or phone (Android or Apple iOS), then you can read the necessary data by scanning the QR code. By the way, you will also need it if you want to use the proprietary application from the developers - My.Keenetic or Keenetic Cloud. In my opinion, configure the Kinetic router from the phone through mobile app much easier and more convenient.
Using WPS on Keenetic
Do not forget about this enough old way connect to Kinetics via WiFi, how to use the WPS function. It will allow you to connect the router and laptop (tablet, phone) with a simple push of a button. First, press the WPS button on the Keenetic router - here it is:
Then, within a minute, we do the same on the gadget from which we want to connect. On tablets and phones, the WPS button is usually software-based and is located in the wireless settings section.
My.keenetic.net personal account does not open
This is a fairly common situation. Often, the web interface of the router, that Kinetics, that any other, may be unavailable for two reasons - either due to incorrect settings on the computer or laptop from which they are trying to enter their personal account, or due to problems with the router itself.
PC network settings
Let's start with checking network settings on PC. I will consider, for example, the operating Windows system 10. Go to the OS settings and open the "Network and Internet" section, select the adapter used - Wi-Fi or Ethernet. Then on the right you will need to click on the "Configure adapter settings" button. This will open a list network adapters computer:
Click on the required right click mouse and select "Properties". A window will open in which you need to double-click on the line IP version 4 (TCP/IPv4). In the next window, check that the boxes for automatically obtaining IP addresses and DNS are checked. We try to go to my.keenetic.net or 192.168.1.1 .
If suddenly for some reason the computer does not automatically receive an address from the router, then you should try to register the IP manually. To do this, again in the same place, in the parameters of the IP protocol version 4, check the box "Use the following IP address":
IP address: 192.168.1.2
Mask: 255.255.255.0
Gateway: 192.168.1.1
Preferred DNS: 192.168.1.1
Click on the "OK" button and check the entrance to my.keenetic.net.
Attention! Quite often, users enter the address of the router incorrectly and therefore they cannot enter his personal account! Here is an example of an incorrect address entry:
me.keenetic.net
mu.keenetic.net
my.keenetik.net
In this case, the browser will automatically be redirected to the Internet in search of such a site. And since it does not exist, the error "Site not found", etc. will be issued.
Problems with the router itself
In cases where the reason for the inaccessibility of the personal account of the router is the failure of its operation, the only right solution is usually to reset the Kinetics settings using the Reset button - a small round button on the back of the case.
This button is specially hidden so that the user does not accidentally press it. Therefore, in order to press it, you need to use a ballpoint pen, a match or a paper clip.
MY.KEENETIC.NET - this is the address where the entrance to the personal account of the router settings is located Zyxel Keenetic. Also, in order to enter the router through the web interface, its standard IP is suitable - 192.168.1.1. The login is usually "admin" and the password is "admin" or "1234". However, since you got to this page from a search, you clearly had difficulty logging into the router through my.keenetic.net. Let's figure out what exactly the problem is and how to enter Zyxel settings Keenetic Lite, Start, 4G, Omni or Giga from the web configurator.
Zyxel Keenetic Personal Account Not Opening - my.keenetic.net or 192.168.1.1 Not Entering
I will clarify right away that which of the addresses to use to enter the control panel is up to you. There isn't much difference between them
- My.keenetic.net- designed for ease of memorization and perception
- 192.168.1.1 - standard IP address for many models from different manufacturers
While constantly helping readers of this blog with hardware connections, I have noticed a common problem that they cannot enter the settings. Many try to log into the Zyxel Keenetic router at 192.168.0.1 or my.keenetic.net.html, but .
Friends, if you want to use his IP address, then enter your personal cabinet Zyxel Keenetic is only available through 192.168.1.1 or my.keenetic.net. For others, the browser does not enter the settings if the standard configurations have not been changed previous owner.
Therefore, typing http://192.168.0.1 or my.keenetic.net.html in the browser makes no sense - you will just get an error about a non-existent page.
But it also happens that you enter the correct address “my.keenetic.net” or “http://192.168.1.1”, and the browser does not enter your personal account. This may indicate problems with incorrectly set parameters on the PC. They simply could have been preserved since the time when your computer was connected to the Internet directly with a cable from the provider. Now I will tell you what it is about.
Go to Windows Control Panel
in the "Networks and Internet - Network and Sharing Center" section public access»
Here we find "Connection by local network” (“Ethernet”), if you connect your router to your computer via cable, or “Wireless Connection”, if you are going to configure it immediately via WiFi. We click on one or the other with the right mouse button and go to "Properties".
And here in the section "Internet Protocol version 4" we set all the parameters to "automatic" - obtaining an IP address and DNS servers. Nothing should be written manually.
We apply the changes.
Login to my.keenetic.net personal account of Zyxel Keenetic router - login and password
After that, we will be able to enter the personal account of the router both at 192.168.1.1 and my.keenetic.net without any difficulties. But before that you need:
- Hook to the router in the "Internet" port twisted pair, which was extended into the house by the provider
- Connect it to the computer via the LAN port with the patch cord from the kit, or connect to it immediately via WiFi - we take the connection data from the sticker on the case, which indicates the network SSID and login password to enter the router
Then we open the browser on a computer or laptop and enter in the address bar (do not confuse with the search box) "my.keenetic.net" or "192.168.1.1".
The router login page will open. In the very first modifications of Keenetic (I don’t know if anyone else has them), in order to enter the settings, you had to enter your login and password. The default values are "admin" and the key is "1234". In new versions, the control panel is not protected, but
There are two ways to enter the settings of Keenetic routers (Lite, Giga, Ultra, Extra, Viva, Air) from Zyxel. The first - common to all devices of this class - is through the IP address 192.168.1.1 . It must be entered into the address bar of the browser and press the "Enter" key.
After that, an authorization form should appear, where you need to enter your login admin and password 1234 , which comes on the device by default from the factory. But besides the digital address 192.168.1.1, Keenetic has another one - a symbolic address or Domain name - my.keenetic.net.
By the way, it is the domain name "my.kinetic.net" that is indicated on the case of Ziksel modems and routers in the last couple of years:
A user who first took up setting up a router may be rather puzzled - what address should be used to enter - 192.168.1.1
or my.keenetic.net???
Actually, it doesn't matter! Both addresses are relevant - they are two sides of the same coin. They just work at different levels.
The fact is that IP is a digital address. network device working on network layer OSI model, and the domain name is at the application layer. When trying to log in to the Zyxel router settings Keenetic III, Air, 4G, Lite, Giga, Ultra, Extra, Viva or another model using a hostname, it is automatically converted to an IP address using DNS technology.
Why does not go to my.keenetic.net - the site does not open?!
What to do if the router is available at the IP address, and when you try to login to my.keenetic.net- the personal account of the Zyxel router does not open and the browser does not enter the web configurator.
This is usually caused by incorrect DNS setting on the computer or laptop from which you are trying to access the device.
In order for the Ziksel router to be accessible at the symbolic address my.keenetic.net, it is necessary that the "Obtain DNS server address automatically" checkbox be checked in the IP version 4 (TCP / IPv4) protocol settings.
Or, as an option, you can manually enter the address of the Keenetic router - 192.168.1.1 as the main preferred DNS server. Like this:
If you do not have anything written in these fields, then access through the domain will not work!!! This is not how it should be:
You will also not be able to access the Ziksel Kinetic router through my.keenetic.net if you use public Google servers(8.8.8.8 and 8.8.4.4), Yandex (77.88.8.8) or your provider's servers:
The fact is that this domain name is registered on the Keentic router itself and redirects to . External servers do not know about the existence of a local network host with this name and try to search for a host on the Internet. And since there is no such thing there, then as an answer we get "Page not found" or "Node not available".
This article will discuss in detail the configuration of Zyxel family routers. Most ISPs have auto-configuration technologies in keenetic.net, but sometimes there are situations where the ability to work manually comes in handy. Often there are nuances in creating a wireless connection through a router, and here you can’t do without the user’s personal participation in setting the necessary parameters for the correct operation of the device.
All operations in changing the parameters of the device can be performed either through a wired connection from a computer or laptop or via a wifi connection even through a connected Android tablet. Therefore, you can use any of the proposed options, there is no fundamental difference, but in the old fashioned way, many people prefer to perform all the necessary operations through the connected cable, which is why the article focuses on this type of connection.
So, if you still decide to use the wire, then the provider's main cable must be connected to a special connector on the device under the inscription "Internet". Now you need to connect the computer itself to the router, for which the small wire that came in the box set, one of its ends is connected to the router in the LAN connector, and the other in network port computer, which is located on the back of the system unit.
When everything is connected, plug the router into a power outlet and start the device by pressing the "Power" button. In case you are not friends with old technologies and for this reason decided to use wireless connection, then after turning on the router, you need to connect to its wireless network using special code access listed on the back of the machine.
Some users after changing settings wireless device start the Internet through high speed connection. It is strongly not recommended to do this, because after all the settings, the router itself will connect to the Internet, otherwise the Internet will work only on one of the computers.
To avoid possible errors, you need to perform a few simple steps as shown in the pictures below. In the Start menu, you must run the Run system utility and enter the ncpa.cl command. After that, a list of available connections will open where you need to select the connection through which the actions related to changing the settings of the wireless device will be performed. After selecting the network, you need to open the properties by right-clicking on the icon.
In the properties, select "Internet Protocol 4" and open "Properties" again. In the new window, you need to check the boxes exactly as shown in the picture, but by default everything should be correct, so all that remains is to check the necessary parameters.
Now you can start working in the browser. In the address bar, enter the address 192.168.1.1 or enter http://my.keenetic.net and press "Enter". After loading the page, the home page of the router's web interface should open.
On the home page A login form will appear with username and password fields. The login information is standard - admin, both for the "username" field and for the password. If the access data was entered correctly, then after authorizing the system and logging in, you will be taken to the keenetic.net settings page.
Setting up Keenetic via NetFriend
After authorization in the http://my.keenetic.net system, a page will appear where it will be possible to select one of the two possible modes of operation in the settings. In our case, this Quick Setup netfriend. Now you need to select the state, city and current Internet service provider.
As you can see auto tuning router, using the keenetic.net wizard, is very simple, so the last step the user only needs to enter is the personal account and password that was issued by the provider to access Internet resources. In this example, Beeline's personal account, but for other providers, the steps are similar. When the access data is entered, you need to press the button to continue, and at the same time, the NetFriend system will automatically establish a connection. If the access key is valid, then the router will connect to the global network and check for updates for its equipment and, if available, offer to update the firmware version. It is highly recommended to do this, and for this you just need to follow the prompts of the keenetic.net system, and the device will do the rest on its own in automatic mode.
In the next window, you will be given the opportunity to select the port of the router for connecting a TV cable. You just need to choose one of the four and in the future, if necessary, connect a special cable to the specified connector.
Then, my.keenetic.net will offer to activate Yandex DNS. Why this is needed is not completely clear, but most likely this is an extra option.
Finally, the installation of network parameters is completed, and in the last keenetic.net window that opens, information about a successfully established connection will appear. No additional actions need to be taken anymore and you can immediately start using all the available services of the provider. But since Internet access is carried out through a router, and specifically, through a wifi connection, it is necessary to set a password so that unauthorized people are not able to use free internet and even more so to take most of the speed. To change the settings for accessing the wireless network, you need to log in to the Web configurator.
Setting up wifi on Zyxel
If it becomes necessary to change the access password wifi connection or other information, you can do it in the configurator. First you need to log in to the device at http://my.keenetic.net, and in the window below click on the wireless network icon.
The page that opens contains all the parameters that can be changed, including the password for access. The network name is the name of the device, which can be changed to any one you like, and the network key is the access password, through which it is possible to connect any portable device to home network the Internet. All parameter fields are clear even for novice users, so there should not be any difficulties. After all the changes, you need to click on the "Change" button and reconnect to the wireless network using the new parameters to access.
Manual setting
Quite rare, but still sometimes it becomes necessary to make a change manually. In order to create a new connection manually, you need to enter the web configurator and click on the planet icon at the bottom of the window. In the "Connections" tab you will see all currently available connections. If you need to create your own or make changes to an existing one, you can do this in the PPPoE/VPN section.
By clicking on the connection of interest, a page will open with the ability to make changes to each of the parameters. Using the "Add" button, you can configure a new connection yourself.
Thus, we considered the possibility of working with the wizard for creating and changing connection arguments in my.keenetic.net. After reading this article, every happy owner of Zyxel equipment will be able to independently establish any connection, after logging in to the setup wizard. So, there are two ways to work with the system: manual and automatic. Nevertheless, for the average user, it is recommended to use the least problematic method. Automatic work with the system allows you to reduce time and get rid of unnecessary digging and studying unnecessary information regarding the intricacies of the Internet connection.
The manual configuration method has the right to exist and comes in handy in cases where providers suddenly change access addresses, so that the system cannot get all the information automatically, much less install them. In such cases, manual work skills come in handy, but in any case, if such a problem arises, then specialists from the service provider's call center will help eliminate all problems, controlling each step of the action through the phone.