Reading time: 36 min

Wi-Fi connection never ceases to amaze with new options for failures. In today's brief excursion, consider the problem "". Most likely you encountered it when you tried to connect a friend's laptop to the network or after the connection to the device was interrupted. There is nothing wrong with this, you just need to correct the network settings and it will start.

Why can't I connect to a Wi-Fi network?

Windows could not connect to the network for various reasons, usually the problem is the failure of the WiFi router, probably automatic settings out of order or a problem in Windows. Most often, the point is to change the password for the network or change the type of encryption, perhaps even without your participation. In any case, there is a fairly effective remedy for this problem, you just need to reconnect to the network, and at the same time, as a new device.

Before "sorting" the system, you need to try restarting the device, which helps in most cases. Sometimes you have to repeat the procedure twice or thrice. Then execute:

1. Click on the tray icon WiFi connections(of course inactive);
2. Expand the full list of settings by clicking on "Network Settings";

1. Click on the link "Manage Wi-Fi network settings" again;

1. Select a network with a problem connection and click on "Forget";

1. Reconnect to the network.

Most often, the problem disappears at this stage, but only if the cause is superficial and not related to the failure of the router settings, otherwise the diagnosis should be continued.

In some cases, a test is launched that reveals the requirements of the network, the password window does not even appear, and the test is endless. You will have to perform a full reboot of the device.

Full driver reset on Wi-Fi

If it still says "Unable to connect to the network", we continue to eliminate the parameters that have been changed and block the connection by reinstalling the drivers. This is how it should be:

1. Click on Start and RMB on "Computer", then "Properties";
2. Select "Device Manager";
3. Expand the list "Network adapters";
4. RMB on the required item and "Delete";

1. Remove the device and restart the PC;
2. The hardware will automatically update and you can start the network.

Quite often, if not always, this method helps to fix computer problems, except for the rare cases described below.

Windows cannot connect to a Wi-Fi network: configuring a router

Often it is not possible to connect to the Windows 10 network for one simple reason - the router accepts inappropriate parameters for distributing the network, so the router can switch to channel 12 or 13, but it is not always available, so it should be changed. Also, the encryption type and key may prevent the connection.

First of all, you should restart the router, or rather several times and check, maybe everything will work on its own.

Otherwise, you should change the channel manually or reset the settings to factory settings. We will not consider resetting the settings, since there is already a fairly complete instruction.

Selecting a channel is not an easy procedure, especially in apartment buildings where the majority live. A decent load is created on the channels, because of this they become clogged and the coverage weakens. You can sort through the channels at random and check for a result, or use special programs - WiFiInfoView or inSSIDer, which provide necessary information. After determining the free channel, it remains only to replace it:

1. Go to 192.168.1.1 in a browser;
2. Next, click on "Wireless";
3. Select "Wireless Settings";
4. Remove the "Auto" value, replacing it with a manual selection;

1. In the drop-down list "Chanel" select the appropriate option.

The instruction is drawn up on TP-link example, but suitable for most models, in extreme cases, the menu is intuitive, you won’t get lost. Usually the first 6 channels are installed, because of this they are quite loaded, it is optimal to install from 8 to 11.

Additional ways to solve the problem

Some users note that even all the above tips did not help fix the problem until the moment they turned off the antivirus. Sometimes this happens due to filtering the Internet connection, but this is an undesirable procedure now.

You should first check if this is the case by clicking on the antivirus and selecting "Pause protection", try to connect again. Sometimes you have to restart your PC. In case this is your problem, you need to either disable connection filtering, or stop it altogether, you can also add the network to the exception.

In addition, it should be noted that updating the configuration helps some users. This button is located in the "Device Manager" and looks like a monitor.

Using one or more of the approaches described, it is possible to completely eliminate the error that Windows or the router provoked. Also, when changing the channel, you can notice a significant increase in the speed and distance of the network coverage.

If you still have questions on the topic "What should I do if I get the error "Cannot connect to this network"?", You can ask them in the comments

The WiFi network is a brilliant achievement in the field of network resources and represents wireless connection to the internet. Thanks to this connection method, people got the opportunity to use the Internet for free in all places that distribute WiFi. Millions of people have already experienced the benefits of this connection.

Convenient wireless network for everyone, its advantages

First, connecting to wireless network it is possible in almost all premises, it is especially beneficial for those areas where it is impossible to connect in a common wired way.

Secondly, wireless Internet makes life much easier active users world wide web. Lack of attachment to computer desk and the ability to connect multiple devices at the same time played a role. Thirdly, all existing operating systems support WiFi (Windows 8, 7, XP; Vista, Mac and Android). Accordingly, you can access the network not only from a computer and laptop, but also from smartphones and tablets, most of which have a built-in module for connecting to a wireless network. Another advantage of the network is top speed, it goes up to 300 Mbps. A wireless WiFi network is distributed through a router connected to the provider's network via a wire. Let's deal with the question of how to connect WiFi and what is needed.

Availability of internet from an internet service provider

Despite all the advantages of this network, there are still disadvantages that users of Windows 8, Windows 7 and Windows XP operating systems face. WiFi given the fact of bringing a lot of inconvenience to users of a wireless network. One of the reasons for the lack of network may be due to cable problems. There may also be a server failure. Therefore, before looking for a lost WiFi connection, you should check the availability of the Internet from your Internet service provider. Report the problem to your ISP, have the company administrators check for a line break or other problems. However, if everything is fine with the Internet, but Windows could not connect to WiFi, then you need to check the settings of the router.

The device does not see available connections

Check if all the indicator lights on the router are on, if the computer is connected to the wireless network. If the computer does not show the network, try restarting it.

If Windows failed to connect to WiFi on a laptop - check the work wireless adapter. If the adapter does not connect, you must reinstall the appropriate driver Network Windows 7 and Windows 8 support the network driver update feature. However, to do this, you need to find this driver on your computer.

How to find and update the network driver on your computer?

If you do not know which network driver is on your computer, you will need to go to the "Computer Management" section, to do this, click right click click on the "My Computer" icon, select "Manage" from the list provided. A list of possible functions will appear on the left side of the screen.

You need to select "Device Manager" → "Network adapters". Your attention will be given a list of network drivers. By right-clicking on them, select → "Update driver software". If there are no changes during the update, try downloading a different network driver that is suitable for your operating system, and reinstall it. Remember that downloading any software it is necessary only from trusted or official sites.

Secure storage

For one reason or another, drivers may crash at some point. It is for this reason that it is recommended to store all the programs you need for your computer on a separate removable media. "Any program can be downloaded from the World Wide Web" - you say. But what if exactly the software that is used to connect to the Internet crashes? In such a situation, a disk or flash drive with drivers will help you out.

The problem is caused by a serious system failure

When you finish reinstalling the driver, the connection should show up in the toolbar. If this does not happen, try rebooting the router and the device itself, on which you are trying to catch the wireless network. After that, at correct settings everything should work. Otherwise, you need to figure out what the problem is. You need to try to connect to the network from another device, if it catches the network - then the problem is in your operating system. Since WiFi is not displayed as a result of reinstalling the driver, Windows will most likely have to be reinstalled too. Well, this is the saddest version of events. Everything can be much easier. However, if not a single device sees your available network, the problem lies in the router itself, in its settings.

The system gives a connection error

If available networks are displayed on your device, but when you try to connect, the connection does not occur or the system notifies you of an error, then the reason may be the incorrectly selected mode in the router settings. For the normal operation of the network, it is necessary that the mode be mixed B / G / N. You can check or change it in the router settings. To do this, in the interface of the router in the Wireless section, you need to select the mode of interest to us.

Access zone

One more possible cause absence wireless connection May be WiFi signal range. Dot Windows Access may simply not finish the signal to your computer. To make sure this is the case, pay attention to the wireless network icon. It is located in the lower right corner of the screen on the toolbar. If not all divisions of this indicator are displayed, try moving the router closer to the computer and try to access the Internet again.

Automatic connection

Check that the key is correct, you may be typing characters with the Caps Lock key turned on. If you enter the wrong WiFi key, Windows 7 will try to connect again after a certain amount of time. This process will continue until you re-select your own from the list of available networks and enter the correct password.

Get rid of unnecessary

In the practice of wireless connection, there is a moment when, it would seem, a person correctly entered the network access key, but the system still displays a message stating that Windows could not connect to WiFi. The fact is that the system remembers any changes in the settings of the router and tries to apply them when starting a new connection. In this case, try deleting previously used networks on your computer, tablet or laptop.

To do this, you need to take some action. By clicking on the wireless connection icon, you need to select the "Network and Control Center" section. public access". Next, click on Manage Wireless Networks. All unclaimed connections must be removed from the list. After completing this procedure, try to connect to WiFi again. If this method did not help, and it does not happen WiFi distribution? Windows means it can't find your IP address. In this case, you need to change the specified wireless connection settings.

Prerequisite for a wireless network

Windows could not connect to WiFi (or no Internet access) are perhaps the most common wireless network problems. To find out the reason, you need to go to the properties of the network you are trying to connect.

To do this, just left-click on the network adapter icon and in the list that appears available connections right click on your network. Next, select the network and the category "Status". If in the column "IPv4 connections" there is an inscription "Without access to the network" or "Without access to the Internet" - you should check the correctness of the addresses involved in the connection. To do this, in the same window, click on the "Properties" button. Select → "Protocol .. for version 4" → "Properties". You must confirm receipt of the IP address and the requested server in automatic mode.

If you have already entered data into manual mode, before switching to automatic receipt of the address, remember the available ones, they may still be useful to you. Keep in mind that if the DNS server is incorrectly specified, there may be a problem with opening pages on the Internet, while Skype programs and ICQ can work normally.

Distribution of WiFi from a laptop. Windows

In order to distribute a wireless network directly from your laptop, you need to download and install special program WiFi connection version v2.4.1, which will allow you to do this. This program suitable for everyone Windows versions. How to connect WiFi with it?

So, first, run the program, after which you need to go to the settings and create a network name (preferably in Latin letters) and a password. The password must be at least eight characters long for security purposes. After filling in all the fields, confirmation is required - by pressing the OK button. Next step: you need to go to and in the properties existing network, in the "Access" section, check the box next to the "Allow other users to use the network" command. In the proposed list, select your created network and click OK. It is also necessary in network connections in the "Change additional options» enable network discovery in all available tabs.

As a troubleshooting option lack of WiFi you can reconfigure the router.

All access points without exception have a reset button - press it and hold it for a few seconds. The router after such a procedure will return to the factory settings. Next, you will need to enter the address of the router (192.168.0.1) in the search bar of your browser, and then go to the device interface. The program will immediately prompt you to change the login password - do this and go to the router interface using your password. Next, select the function "Connect the Internet" → "Add new". The Internet Setup Wizard will prompt you to select the type of connection. After that, the program will ask you to enter your username and password to connect to the Internet. This information is provided by your ISP. After filling in all the data, you must save the information. After that, it is advisable to restart the operating system of your computer.

If none of the above troubleshooting options helped you, use the following advice. Unplug the router for a while from the outlet. After 8-10 minutes, turn it on again, this procedure very often has a positive effect.

WiFi- this is the technology that today is equipped with a very large part of apartments, cafes, restaurants, vehicles and many others social places. And oddly enough, now every second person uses this technology using smartphones, tablets and laptops. I remember before, I had just a simple PC with a huge monitor and the Internet connected via a telephone line, then I even thought that soon there would be such a thing as Wi-Fi, and that all other digital technologies, will also develop at an incredible rate.

I think that you have already guessed that now I will talk about Wi-Fi again. If we delve into more specifics, we will talk about why wi-fi may not work on a laptop, as well as how to properly connect a laptop to Wi-Fi and what to do if an error occurs " Windows was unable to connect to the network».

Why did I choose this topic? In fact, everything is logical, look, those who have Wi-Fi at home usually use it with a laptop, and now there are a predominant number of such users. And it so happened that when you try to connect to WI-Fi through a laptop, not everything goes so smoothly, various errors begin to appear or not find the network at all. That is why, I decided to describe those situations why it might not work for laptop wifi and the reasons for the appearance of such an error as: "Windows could not connect to the network."

So right now, together we will analyze every reason that could cause problems when connecting a laptop to everyone's favorite Internet via Wi-Fi. And let's try to find a solution to the most popular problems due to which Wi-Fi may not work on a laptop or an error like "Windows could not connect to the network" will appear.

I want to immediately note that not always the reason for the lack of a Wi-Fi connection is a laptop or computer that was connected via a Wi-FI adapter. Sometimes, the router itself may be the cause due to incorrect settings during its installation, or there may be no direct signal from the provider, and we will foolishly sin on the laptop.

Therefore, in order not to lose valuable time, we will start with diagnosing and determining what is the direct cause of the lack of Wi-Fi when connecting to it using a laptop. I will give all examples on , but since all new system very similar to each other, you can easily find the item or parameter you need and the rest of the OS.

Diagnosis of the reason for the loss of a Wi-Fi signal

In any diagnosis, there is no time to make hasty conclusions, I understood this from my own experience and having checked everything on my own skin. Sometimes, the cause of a malfunction or the appearance of some kind of error may lie in some little thing or in a setting that you would never even think about, as a result, spending huge amount time to look for the wrong reason. The same applies to the Internet, before you take out a Wi-Fi router or laptop and make any changes to their settings, you should find out exactly who is to blame for the router or laptop. And now we are changing the settings so that later we will have to reset them back to the factory state and configure the router again.

The very first option would be to check the Internet using a direct cable connection from the provider to your computer or laptop. If the network connection icon lights up as usual without any warning signs, then everything is OK from the provider's side.

Next, by connecting the cable back to the router, we try to access Wi-Fi using some other device, such as a smartphone, tablet or game console. If, after connecting, the Internet icon will be displayed normally and will open various pages in the browser, then everything is fine with the Wi-Fi configuration.

By doing such not at all complicated manipulations, you can determine that the reasons for a non-working Wi-Fi signal are located directly in the laptop itself

Note: If the Internet is completely absent on all devices, then the problem is clearly in the router itself or in its settings.

Enabling the WI-Fi adapter on a laptop

Of course, first we check whether the wireless signal module itself is physically turned on or not, perhaps Wi-Fi does not work on the laptop precisely because of it. Although it is almost always enabled by default, it’s still worth checking, since you could disable it on purpose or do this inadvertently, or maybe some kind of virus or an incomprehensible program that saves battery on a laptop tried instead of you.

Usually for everyone laptop computer Wi-Fi is displayed as an antenna, and is located mainly in the area of ​​\u200b\u200bthe " F1…...F12". A little lower in the screenshot in which I show an example, it is located on " F3". But there is one point, to turn on the adapter, just pressing F3 is not enough to use secondary commands ( What is the button to activate the WI-Fi module), you should press another auxiliary key on which it says " fn».

That is, for turning on Wi-Fi, hold down the key fn' and after that the button ' F3"(Example ) on which I had the network icon displayed ( Your key may be different, pay attention to this).

Reboot network and laptop

Another problem due to which you cannot connect to WI-Fi from a laptop is network sticking. Yes, yes, very often I met this even in my home network. Everything seems to be there, all devices are connected, but not your laptop.

In such a problem, rebooting the router often helps me by disconnecting the power cable and then restarting the computer. And only after all this, the laptop starts to normally catch a signal from the Wi-Fi router.

But the most interesting thing is that after rebooting only a laptop or a box with Wi-Fi, nothing happens to the Internet, you need to do this with both, and with that, in turn, first the router, then the laptop. Be sure to try this, perhaps, like me, this method will help you.

Check if the WI-Fi adapter driver has crashed

This kind of problem is most common when buying a new laptop or after. There are a lot of such users who do not even know about such a thing as a driver and do not know how it works, in fact, they should not know this, because it is not their concern. But, because of the hacky master who installed Winodws or because of the store that sold the laptop. with a clean Windows, it happens that the correct driver no, and if there is a driver for the network, then only for the LAN adapter, and there is no module on the WI-Fi.

In general, the reasons for the loss can be different, so let me show you how to check if everything network drivers installed or not. In principle, everything is as easy as shelling pears, go to " Network and Sharing Center", which you can find in " Control panels", and there we click on" Change adapter settings».

A list of adapters that are installed on the laptop should open, if you do not find one there, such as "Wireless network connection», it means you don’t have a driver and the reason for the non-working state of WI-Fi on a laptop is exactly it, so for full-fledged work you will have to re-install the driver on the Wi-Fi adapter.

Otherwise, if there is such a connection, as shown below, then the driver is installed, and everything should work fine, without any problems.

Restarting the wireless adapter

Without leaving the adapter settings, call context menu by clicking on the wireless network and select " Disable».

Well, then again, calling the same menu, click on " Turn on”, then start the work of the “BS” back.

After doing these manipulations, a yellow star should appear on the WI-Fi icon, indicating that Wi-Fi is not connected, but there are networks available for connection in the list. If you have already been connected to the network before, then most likely the connection will simply be restored and a normal, clean signal level icon will appear, without any signs about the absence of a network, etc...

And finally, let's talk about the error, "". This error is one of those that are very common when working with Wi-Fi and is one of the most annoying, because the reasons for its appearance are not clear and the solution to it every time can be quite unusual.

After what does she appear? By clicking on the icon WI-FI connections, a list of available networks will appear, where, having selected the position you need, you click on the button “ Connect».

Everything seems to be fine, you have requested a router. By pressing " OK", must start connection.

But in a friend, instead of connecting, a window appears with the words that "Windows could not connect to this network." I am sure that at appearance of this problem you again, re-tried to establish a connection to Wi-Fi, but this attempt was also unsuccessful.

Usually, the cause of such an error is themselves wifi settings router, for example, an incorrectly set security type, where there is one on the router, and you are trying to connect differently. Be careful when choosing encryption, I think if you set up the router yourself, you know what you set, the rest most likely have the type “ wpa2-psk", which today is used in almost every WiFi networks. Check to see if security is what caused the "Windows could not connect to this network" error.

Sometimes, again, I repeat, sometimes, rebooting the Wi-Fi router and device helps, I mentioned this a little higher. But this is not a template solution that will definitely help. If you have already encountered such an error, simply and then, using our instructions,.

After such a radical step, the error “Windows could not connect to this network” should no longer bother you.

I will end on this. It seems to have remembered everything that helped me in solving such problems as wifi not working on laptop and the "Windows could not connect to this network" error. Perhaps you managed to overcome these malfunctions in some way, then don’t be greedy, leave it in the comments and I will 100% add it to the article as an addition so that everyone can find something that suits or helps him.

Wifi not working on laptop. Error: Windows could not connect to this network

Wi-Fi has spread everywhere. It is available in almost all public institutions and parks, and some private apartments and households have begun to equip Wi-Fi. In many electronic devices, manufacturers install such a module.

Now not a single computer can do without it, whether it be stationary or in a laptop version, and it’s not worth mentioning phones, TVs and tablets, because even some watches already have a built-in Wi-Fi adapter.

Absolutely, very soon this feature will be present in kettles, door locks, refrigerators, coffee makers, microwave ovens and even air conditioners.

From being used for entertainment, education, and communication purposes, wireless networking has rapidly grown into an absolute necessity for every person. But what to do when connection difficulties arise?

Below is a guide on how to quickly and effectively troubleshoot connection problems for various types electronic gadgets.

Solving Internet connection problems

If the user is unable to connect to Wi-Fi from their electronic device, then first of all you need to check the availability of the Internet at the router itself that broadcasts the wireless signal.

To do this, you need to connect a computer to the router via a wire and see if it will connect to the global network. If not, then the difficulties arose in the incorrect settings of the device or on the side of the communication service provider company.

At a positive result, that is, in the case when Internet access appeared on the PC via a cable connection, then proceed to the wireless network settings.

Solution

First, make sure that the LED with the “Wi-Fi” icon on the router is active, and also make sure that the Wi-Fi module is turned on in the gadget from which you plan to go online.

If the router indicator is off, you need to open the web-configurator of the device (it can be accessed through a browser, and the address is indicated in the device documentation or on a sticker on the bottom of the device case) and turn on the network.

In the case when there is no communication activity in the PC or in the mobile device, then reboot the device. When using a laptop, the module is already activated in it by default.

However, the device may be turned off by some other user in order to conserve battery power. Then on the keyboard you should find a key with a characteristic image. For example, on "ASUS" it is required, while holding the "FN" button, click on "F2".

On different laptops, switching on is carried out in different ways, for example, Acer and Lenovo have separate switches located on one of the ends of the mobile PC.

Such a toggle switch must simply be set to the “On / On” position and the adapter is activated.

Then, after waiting for the router to load completely, you need to restart the laptop or gadget. You can make an exception only for Vaio laptops from Sony, as they will connect automatically, but even for these machines an extra reboot will not hurt.

Activating Wi-Fi on a computer using the operating system

On a Windows PC, you will need to do the following:

When the execution of the described measures did not lead to success and the computer still does not connect to the Internet, you will have to proceed to the study of the following paragraphs of this guide.

Software problem

The frequent difficulty that causes such a problem is incorrect installed drivers or their absence.

At the same time, the name of the module is not displayed in the "Device Manager", and it can also be marked with the "!" icon.

What should I do when the software for the Wi-Fi module is not installed?

You only need to follow a few steps:

1. It is not easy to write out the exact name of the laptop model, that is, it is not easy, for example, “Samsung”, but to find out its full name from the documentation or from the packaging of the device. In the case of using a stationary PC, then in the same way find out the model of the Wi-Fi adapter itself;
2. Enter the Internet resource of the equipment manufacturer and download software for your device;
3. The software is installed like any other program, you only need to follow the requirements of the installation wizard. After the procedure, be sure to restart the PC. You can also install using the "Device Manager", but first you need to extract the driver distribution package to a separate directory in the PC's memory. Then in the "Driver" column, click "Update" and click "Search on this computer". Next, show the program the location of the directory with the distribution kit and the OS will install the software itself.

If access did not appear, even though the device now sees the network, but cannot connect, then the mode is probably incorrectly set in the router's web configurator.

Checking your router settings

Open the “Wireless” tab in the web configurator and set the Mixed mode. In the D-Link instrument interface, this standard is displayed as follows:

In the settings of devices from Ziksel, you need to install a template, as highlighted in the screenshot below:

In the case when it is still impossible to access the Internet, then most likely at this stage the computer already sees the wireless network perfectly, but does not connect.

To correct the situation, you just need to follow the steps described in the next paragraph of this manual.

Debugging a connection

In such a situation, the "Network and Sharing Center" will display the following picture.

It is necessary to perform the following actions:

1 scenario:

This means that the problem is in the Wi-Fi module, which cannot get the “IP” address or it is simply not specified correctly.

To fix the problem, do the following:

2 scenario:

The following menu appears:

This means that the network parameters are entered incorrectly in the router's web interface or the wrong DNS addresses are specified.

To fix the problem, do this:

If again the login is problematic, then the only option left is to simply remove the restrictions in the router's web configurator.

Difficulties connecting to Wi-Fi on an Android device

Before starting the actions described below, it is recommended to make sure that the broadcast access point is working, and to do this, connect to it from another device, for example, from a laptop. It is possible that the problem is not in Android, but in the settings of the translator.

Often, an Android gadget normally recognizes a wireless network, however, it cannot connect.

This is often the fault of the owner himself. mobile device, since there is a high probability of an error when entering the access key to a secure network. It is necessary to carefully check each symbol of the code and the difficulties will quickly eliminate themselves.

The next most popular reason is that the phone or tablet does not support the type of protection that is specified in the router's web configurator.

We just need to change given type, entering the instrument settings interface, after this adjustment, the connection will be made without problems.

Use of third party applications

In the "Play Market" from Google, many utilities are available for free use, designed to solve all the difficulties that arise with connecting Android devices to Wi-Fi.

The application shows the connection status and all available points within the range. According to the developers, the utility is able to increase the signal reception power if it is weak or if the translator is too far away.

And vice versa, reduce the power of Wi-Fi with an excessively powerful signal, this is especially true when the device is in close proximity to the router.

To take advantage of the utility, you only need to install it, and then after launching it, it will automatically fix all problems and then work in the background, so, as a rule, users no longer have connection difficulties.

When is the cause of the problem in the firmware?

Sometimes after installation in a gadget new version from a third-party developer there are connection problems. In this case, the best option would be to reset the device parameters to the factory state.

Analysis of the characteristics of the wireless signal translator

If the filter by "MAC" addresses is activated in the web configurator, then the gadget can simply be in the list of unwanted clients. In this case, simply disabling this filter will help, or you will need to exclude the device from the black list. For this purpose, the MAC address of the device can be found by entering the settings of the smartphone or tablet.

Apple gadget won't connect to Wi-Fi

Often, iOS devices, when trying to connect to the module, start to write: "Failed to connect to the network." Why Apple did not develop instructions on how to act in such situations is still not clear. Below is a home-made technique for eliminating this error.

You only need to take a few steps:

This technique does an excellent job of eliminating the difficulties that arise when connecting, however, it is not very convenient for users due to the removal of stored network access codes. Therefore, at first, you can try the methods described below, although they are not as effective.

Restart iPhone

In order to force restart the device, you need to hold down the "Home" key and press the device's shutdown button.

Reconnection

In the case when the gadget detects Wi-Fi, but is not able to connect to it, then several actions should be performed:

1. Open the Wi-Fi settings menu;
2. Specify the access point planned for the connection, click "Forget this network";
3. Search for connections;
4. Reconnect to the desired Wi-Fi.

If the above methods did not lead to the desired result, then the problem is probably a malfunction of the Wi-Fi adapter or in the router.

In the first case, you will need to take the iPhone for diagnostics to service center, and in the second you can independently perform several manipulations with the router, and for this you can do:

1. Open the web-configurator of the router;
2. Change the security type to "WEP";
3. In the settings, set the area of ​​residence of the user - "USA".

A very common problem when you connect to WiFi networks in Windows 10/8.1 and you get an error can't connect to this network. With this problem, windows system does not show us the reasons or the code of the error itself, which complicates the task and we can only guess on the coffee grounds. Let's take a look at what can be done and how to fix the error with connecting to a WiFi network or local network in Windows 10/8.1.

Possible solutions to the problem when connecting to a network in Windows 10

If you're having problems connecting to your network, the first thing you should do is try to fix any problems you may have with your network devices. To do this, first of all, you need to disable and enable all network devices, such as a router, access point, modems, everything that is connected to the computer and connected to the Internet, network.

• Click Win+R and type devmgmt.msc to launch Device Manager.

• Expand "Network adapters" and right click on network devices and update them. If you do not know where the local or WiFi map is, then navigate by the word Wireless, this is WiFi. controller is a network local card for connecting by wire.

• You may also want to consider reinstalling them and rebooting your system. If the above methods don't work, try downloading and installing the drivers from the manufacturer's website.

2. Run Network, Hardware, and Device Troubleshooter

• Go to All Settings > Update & Security > Troubleshoot. In the list on the left, select diagnostics in order Equipment and devices, Network adapters, Incoming connections.
• I collected on the site special utilities from Microsoft to ; download the utility that suits you.

3. Network reset

If nothing worked, maybe it will help.

• open" Options" > "Network and Internet" > "State"and on the right find Network reset. This will reset all network adapters default.

If a problem with WiFi connection, then I advise you to delete the existing wireless connection.

• open" Options" > "Network and Internet" > "WiFi" > on the right click on the word " Known Network Management". Next, select from the list the network to which you cannot connect and click Forget. If your list is huge and you don't need them, then I advise you to delete the extra connections.