InstallAPK is a free and simple solution to make it easy to install applications on devices under Android control, will successfully cope with a large number of installation files.
Allows you to install programs on an Android device with personal computer or a laptop running Windows in just a few clicks.
Key features:
- unpacking APK files on the gadget;
- choice of device connection method;
- select a memory card for unpacking;
- reinstallation with saving important data.
InstallAPK will eliminate the need to install each application individually or have a network connection on your gadget. For installation, it will be enough to synchronize via a USB cable or a Wi-Fi connection.
The InstallAPK interface is made in Russian and is intuitive. Has proven itself in work, has not large system requirements. To get started, the utility must be installed on your computer, run, specify the type of connection and select a gadget.
In addition, the user can access the settings and highlight points of interest at his discretion. Here you can specify the installation method, actions after installing the program, and even set the time until the window closes after completing the assigned task. Then the program can be safely closed, and double click left-clicking on the selected APK file initiates the installation of the application on a smartphone or tablet.
Some features when working with InstallAPK:
- You need to enable USB debugging mode. To do this, go to the device settings and look for the developer mode function. AT different brands and models item name may vary.
- In order to avoid error messages, you must allow the installation of applications from unknown sources. The latter is performed in the settings, where, depending on the brand and model, the name of the item and location may change.
- You may need ADB Driver. Usually they are installed automatically when you connect devices to your computer.
- There is no point in synchronizing the device in certain mode, such as storage. It just needs to be connected via a cord, but not in standby mode, i.e. the screen should be lit.
- If the software is still not installed, you can call the log by pressing the L key and see what caused the failure. To unpack the file, a smartphone or tablet needs at least 2.5 MB of disk space.
To install using the utility via Wi-Fi, you will need to specify the IP and Port of your used gadget. Install InstAllAPK, free program from a Russian developer, available for Windows XP and above.
If InstallAPK does not see android device, you need to install the driver, the access link to the site is below near the main one.
A short description of how to use InstallAPK
Download and install the program as an administrator (right click on the icon).
From the foregoing, we can conclude that the topic of today's publication will sound like this: how install apk file on Android. Many people do not know how to do this, although in fact everything is very simple.
So, friends, let's start with a small introductory part. If you remember, then in, we installed the Navitel navigation system from the official application store, which is called Play market.
That is, we still don’t really know how what happened there: we just connected our mobile device to the Internet, went to the store, chose what you need and clicked the "Install" button. This is all set.
But now we will do something completely different, because we already have a pre-downloaded installation file in the “apk” format and the Play Market itself in this case, we don’t need it at all:
So, for you to better understand, a file with such an extension is the program installer for the Android system. For example, if you installed programs on Windows yourself, you know that such files have the “exe” extension there.
From all of the above, the question follows: how to install the "apk" file, if not through the store? And here's how, read from now on very carefully. Further, we will consider everything using the example of the same Navitel Navigator.
Although there is no difference. For absolutely all applications, this procedure is exactly the same. All visibility in the article will be shown on the version of the Android 4.1.2 operating system.
And for starters, we definitely need to make one very tricky setting. Right now, select the "Settings" section:
And in the "Security" tab, check the box next to "Unknown sources". Screenshot below to help you:
Now we need to download the installation file itself with the "apk" extension. In our case, we find it on the official website of the program in the "Download" section:
Pay attention to the picture above. Quite often, when installing in this way, you will be prompted to select the screen resolution of your device. But if you don't know anything about it, choose the version that suits any display resolution.
After the apk file is downloaded to the computer, it will need to be copied to the memory card of your smartphone or tablet. To do this, connect to the PC using a cable:
As a result of this, a message will appear on your mobile device stating that the connection has been established. Now click on the "Enable USB storage" button at the bottom of the screen:
After that, the Android device will be detected on the computer as regular flash drive, to which you need to copy the installation file:
Then again go to the settings menu by clicking on the icon in the upper right corner:
And in the "Applications" window that opens, select the "File Manager" item:
At this stage, you will see a list of folders, among which there is ours with the name "Download":
And finally, we see our apk file that needs to be installed on the Android system:
Click on it with your finger and the process has begun:
Now we are waiting for the end of copying files and you can run:
In principle, this is where all our science ends. We return to the "Applications" section and see the icon of the newly installed Navitel:
By the way, now in order to save space on the device's flash drive, you can delete the installation apk file of the application itself. To do this, return to the "Download" folder and do the simple combinations shown in the figure below:
That's all the wisdom, my dear friends, now we can say with confidence that you know exactly how to install . Agree that there is really nothing complicated here.
And now a few words about the program itself, on the example of which we considered the principle of installing applications in this way. If you are a motorist, you should appreciate the capabilities of Navitel Navigator.
Moreover, now you can easily install it on your mobile device and carry a full-fledged navigation system in your trouser pocket. You just have to download from the official site (link at the beginning of the article) desired cards and drop them into the appropriate folders:
By the way, it is worth saying that the folder structure of Navitel on Android is completely identical. So study and use it to your health so as not to get lost. 😉
And on this note, let me take my leave, if you have any questions, you are welcome in the comments to the article. And now it's time for complete relaxation and the author slowly but surely plunges into a trance.
Today a friend called and asked if it was possible to install APK files from a computer to a smartphone or tablet in automatic mode(i.e. so that you do not need to transfer APK files, then manually install them through file manager). I found the answer to this question and it is positive. At the same time, to install applications directly from a PC to a tablet, you do not even need Root rights. And now I will share with you in detail the instructions on how to do this.
1. We go to Settings -> Applications -> Development -> USB debugging (tick this item)."USB debugging mode" is simply necessary for the program that installs apk files to work. Also, do not forget to enable the installation of files from unknown sources: Settings -> Security -> Unknown sources (tick).
2. We connect the smarfton (tablet) to the computer via a cable and check if the drivers are installed on your smarfton. If all the drivers are installed automatically, then it’s good, but just in case, check for availability installed drivers and do it in paragraph 3 these are instructions.
3. Checking for installed adb drivers. Download the file and unpack it into a separate folder. In the unpacked folder we find the file Run.bat and run it. In the black window that appears, write (or copy) the command adb devices and click on Enter.
If after that the inscription just appeared List of devices attached and that's it, then the PC does not see your smart (or tablet), i.e. Drivers are not installed and need to be installed.
If you see something similar to the picture below, i.e. under the inscription List of devices attached there is another line that says something like " 4df169037ee55f59 device“, then the ADB drivers are installed, the computer sees the connected device and the item 4 You can skip.
4. If in step 4 you found out that the ADB driver is not installed, then you need to install it. In order to install the ADB driver, it is recommended to download and install the program (or download it from the official website). The main purpose of this program is to start the Internet from the device to the PC, but it can be used to install ADB drivers. Suitable for most devices. Just download and install this program. Below are a couple of screenshots of my setup.
5. Download (3.5 MB), unpack the archive and run the program installation InstAllapk. After installation, you can run the program (if the shortcut is not formed on the desktop, then by default it is placed at c:\Program Files (x86)\installAPK\). The main window of the program looks like this:
If in the window with a green circle it says that there are no devices found, then you need to click the refresh button and the device should appear. You can go into the settings and set something as you wish, although everything is configured there by default. You can check the box Install on SD card“, if it is available and to save space on the device.
After you have finished with the settings, you can close the program with a cross.
6. Download the required APK file from the site and click on it 2 times on the PC, after that it will start automatic installation to your device (naturally, the device must be connected with a cable).
Some nuances
1) No need to connect the phone in mode USB storage! The phone should just be connected, "in charging mode". However, before installing the program, you need to “wake it up” so that the screen lights up.
2) Each file apk needs to be run twice. The first time you click - the program starts up, thinks something there, but nothing happens. Close it and run the file again. From the second time everything goes as it should.
3) If the program / game is not installed, click on the button L and look at the program log. At the bottom of the log is written, because of what the failure occurred. Type INSTALL_FAILED_DEXOPT - this can happen, for example, if the phone does not have enough memory to unpack the program. It needs to be at least 2.5 MB free space!
You also need to check if the permission to install is disabled. third party applications. Otherwise, this may also cause the installation to fail. To do this, go to "Settings", then select the item "Applications" and put a tick on the item " unknown sources«.
Well, or, say, if the log gives an error INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES - this is the incompatibility of the signatures of the installed and installed versions of the program. You need to uninstall the previous version.
Some smartphone owners are not even aware that games and applications can be downloaded not only from Google Play . Like Windows, operating android system allows you to download and install the application as a separate file. But if computer programs have the .exe extension, the installation file with the mobile utility has the .apk extension.
Consequences of installation
By default, almost any smartphone does not allow you to install programs and games from other sources. What is it connected with?
- Firstly, Google receives a certain percentage of the sale of each application. It is simply unprofitable for her to give users the opportunity to search for games and programs anywhere else.
- Secondly, the Google Play online store makes it much easier to find any application, and also publishes reviews on it. In this regard, the company is doing its best to teach users to download software only from Google Play.
- Thirdly, a virus may well be hiding on third-party resources under the guise of a very useful utility.
Attention: some sites do hide viruses under the guise of applications. Usually their action is to send SMS to expensive short numbers. This problem is partly solved in Android 6.0, where you can prevent any program from doing anything you don't like.
It should be remembered that if you decide to install the APK file on Android, then you should not rely on its subsequent update. The fact is that only those applications that have been installed through the aforementioned Google Play can be updated on a smartphone.
Installing the APK file
You can download a file with the .apk extension either using a computer or directly to a smartphone using an Internet browser. If you decide to use a computer, then you need to transfer the file to your mobile device. The easiest way to do this is by connecting it with a USB cable. Then all that remains is to throw the APK file into the folder Download or any other.
If, when connected to a computer, the machine does not want to give you access to file system then go to " Settings"and go to the section" For developers».
Here you should check the box next to the item " USB Debugging».
Now you can definitely transfer the file to your smartphone. But that's not all! Now you need to run it in order to start the installation process. To do this, use any file manager. This could be ES Explorer or a utility with the simplest name file manager(“Explorer” in the Russian version of the online store). With the help of such a program, you need to go to the folder Download(if the APK file is downloaded there). The next step is to click on the file.
The last step is to confirm the installation of the application. Along the way, the device will tell you exactly what permissions the program requires. On Android 6.0, permissions are already issued while using the application, as it accesses certain parts of the operating system.
If, when you click on the APK file, a window pops up stating that it is impossible to install, then you should use the following instructions:
1. Exit the smartphone menu and go to " Settings».
2. Go to the section " Safety».
3. Activate the checkbox next to " unknown sources».
4. Now return to the file manager to try installing the application again.
That's all. This completes the installation. See label new program you can in the menu - you will have to drag it to the desktop manually, it will not automatically appear there.
- 3.7 out of 5 based on 69 votes
Unlike iOS and other closed systems, android developers provided the ability to install a variety of applications on their own, without the participation of the Google Play Store and other content stores. With the .apk file on hand, you can install it yourself paid app without paying a dime for it.
"Why resort to self installation by using. apk files? "- you ask, and then that not all applications are presented in the Google Play Store, and besides, most of them are paid and cost money. All Android applications have .apk extensions - in fact, this is a kind of archive, the contents of which can be viewed by anyone archiver.
Where to begin?
The first action that you need to perform is to allow the installation of applications from unknown sources, go to Settings/Settings -> Applications/Application Settings and check the box next to Unknown Sources and click OK.
1. Install applications using the file manager
After this simple step, you can copy the .apk file to your phone's SD card. Further, to install the application, you can use any file manager that recognizes and understands apk files. For these purposes, ASTRO File Manager or ES File Explorer are suitable.
Launch the file manager, find the apk file, tap on it and install the application using the standard Android installer.
2. Install apps using the app manager
In addition, to simplify the installation of Android applications, there are special programs- application managers. One such program is SlideME Mobentoo App Installer.
This popular app manager for Android will automatically scan your smartphone's SD card for apk files and help you quickly install the required application in one click. Isn't it convenient?
3. Install applications using computer and USB
However, the most convenient way to install Android apps is by connecting your smartphone to your computer via USB cable. To do this, you will need the InstallAPK program and USB drivers. Install it on your computer, do not forget about the drivers, connect your smartphone via USB cable and double click on the apk file.
InstallAPK will independently identify the apk file and start installing the application on your Android phone. You will only need to agree with the installation of the application and click the "Install" button.
4. Other ways to install Android apps
In case you don't want to install any additional programs, then you can install the application from apk files in the old, old-fashioned way. Run the standard android browser and enter in address bar browser the following link and the installation will start automatically:
content://com.android.htmlfileprovider/sdcard/Filename.apk
This method is not very convenient, and is suitable for those who rarely install Android programs.
Conclusion
In this article, we tried to describe all the ways we know how to install an Android application from apk files. If you know other ways to install programs - write to us about them in the comments and we will definitely include these methods in this article. Stay with us.