Even modern gadgets high level technology development can fail. There are cases when your smartphone simply does not want to turn on. Many people fall into a stupor, while not even suspecting what to do if the phone does not turn on. We will give the most common causes of this breakdown, as well as possible methods solutions.
Why it won't turn on and how to fix it
In most cases, the problem is related to the battery of the gadget. A less common option is problems with the operating system. Before you take your device to a service center and prepare money for repairs, we recommend that you take a few independent steps to identify the problem. The problem may be banal, which you can solve without outside help.
Battery malfunctions
There are several reasons why the phone does not turn on. Perhaps the battery just sat down, and charging does not give any effect. This is the most common problem, but there may be several reasons for this:
- Another reason why Android does not turn on is the power button is broken. If you have new smartphone then it could be a marriage. Then take it back and change to a new copy. Otherwise, you will have to contact the workshop, where you will have to replace the button for money if the problem is really in it.
- The worst option is that the power controller burned out on the phone. It is he who is responsible for the process of charging the gadget. The only way out is to carry the phone to a service center and then replace it.
As you can see, users can solve most problems on their own if the phone does not turn on. To extend battery life, do not frequently discharge the gadget to zero, but use only certified chargers from the manufacturer.
Memory card
The problem may be that you have inserted an SD card into the gadget that the smartphone does not support. This can lead to failures in program code and impossibility of inclusion. How to turn on the gadget? Just pop out the wrong memory card. If it still won't activate, you may need to reflash your smartphone.
Beforehand, always read in the specification which memory cards and to what extent your mobile device supports. You can also get advice from sellers of mobile salons.
Incorrect system update
Some smartphones, after updating to a more recent firmware, turn into, which will no longer be turned on in the usual way. The solution could be a factory reset. You can do this with . To access it, follow these steps:- Hold down the "Volume Up" key.
- Without releasing it, hold down the "Home" key.
- At the same time, press the third "Power" key.
On some smartphones, the transition is carried out by pressing the "+.- volume" and the "Power" button. Using the volume keys, you need to move the slider to the line "Wipe data / factory reset", and then confirm your choice by clicking "Yes - delete all user data".
You can clear cash and data section. But be careful, as all personal data (photos, contacts, videos and apps) will be lost. If there is something important on the phone, contact the service center.
Relevant in the event that the download of the phone freezes on the icon with the image "Android". This also indicates the incorrect operation of the microprogram. Some devices have a special button that can only be pressed with a needle or toothpick.
Viruses
If the phone does not boot, the files may operating system have been damaged by a virus. Here you will need to flash the phone. In some service centers specialists will be able to restore the phone's performance by cleaning it from viruses. To avoid such situations, we recommend downloading applications only from the official Play Market store, as well as installing an antivirus. You can choose ESET or Dr.Web for mobile devices.
Teach! Explay power and Explay power bank - it's two different phones, the first was produced earlier, but is now withdrawn from sale, and the second, on this moment, is produced and delivered to stores. But the settings engineering menu, they are similar, but the entry code is the same.
And, in principle, the basic settings described in this article may be suitable for many Chinese phones.
It took two days and two sleepless nights to write this article and tweak the settings, the phone was flashed twice (plus twice unsuccessfully using the MultiPort program) ...
Using this menu, you can increase or decrease the volume during a conversation, increase or decrease the maximum volume of a call, audio player, key sound, adjust battery life, enable automatic call recording, and much more.
Code to enter the engineering menu: *39*3646#
ATTENTION!
There are known cases of complete failure of Explay Power phones after " playful crooked pens", which " there was something pressed"and after that the phone completely stopped turning on and working, sometimes it even becomes impossible to reflash it and all that remains is to carry it to the service center, and this is nerves + time + money, and no guarantees from the service center.
Do not change unfamiliar settings if you are not sure!
ONLY YOU ARE RESPONSIBLE FOR ALL ACTIONS WITH YOUR PHONE!
The Explay Power phone, although discontinued ( it's a pity! the flashlight conveniently turns on with it, regardless of the battery charge and the inclusion of the phone), but it was not so expensive ( 1950 rubles about a year ago), so you can experiment in principle, if you don’t mind ...
But I didn’t have any special irreparable problems, so see for yourself.
If the phone still does not turn on after these manipulations, or other serious problems arise, then try to reflash it again according to this instruction on the forum.explays.ru forum, this will reset the engineering menu settings, BUT, for this, in the settings FlashTool you have to check the box Format Fat" (third tick), which will lead to RESET IMEI which we don't need.
And you can restore it only from a previously made backup, but at the same time, the engineering menu settings will be restored again - a vicious circle ...
All SMS in the phone are also deleted and the phone memory is erased ( although there memory is ... 145 kilobytes, but still, I store in it beautiful background desktops, so that if there are problems with the flash drive, the standard background is not installed - I recommend doing the same).
To do this, first remove the SIM cards, and preferably a flash drive. Find this item in the phone settings menu, select " Restore All", enter the phone code ( default 0000), and all settings will be reset, as well as SMS, the contents of the phone memory, contacts in the phone memory - it will all go away again, but IMEI will be saved, which is what we need.
And before any actions with the phone, MAKE A BACKUP using the program FlashTool, the instruction is also on the forum, at the link above!
As for the audio settings. Please note that in the Explay Power engineering menu, some values, for example for the parameters " Volume"and others, you cannot enter it with the numeric keypad, only with the joystick - the " Up" and " Way down".
Accordingly, if you start changing the number from " 0
" the numbers will be even if "scroll down" is the opposite of 255
, then the numbers will be odd - it's not scary.
If you see a value here, for example " 123
", and you can only set 124
or 122
, 120
, or vice versa, then it's okay - choose the closest value.
Or you can pervert - "scroll" to zero or 255 , and then back to the desired value, but it makes no sense to do so. plus minus 1 -2 it won’t play a role here, all the more, I generally came up with these values from the bulldozer, by trial and error, maybe I made a mistake somewhere, but everything suits me in the phone’s work ( Almost all).
Apply settings in the engineering menu: enter a new value (or all values within one item), press " SET", go back a couple of points using the " Back", then the phone will ask: update parameter?- click " Yes", and after that either exit the menu completely, or continue the setup.
Achtung! After some settings, the phone may need to be rebooted ( turn off and on), but in the case of audio settings, in the vast majority of cases this is not necessary.
Just after turning on the phone again, the phone may turn off, it is better to check this by calling it and the audio player.
And further: " Max analog gain" and " step" in " 16 Level Setting" - is always the same for all parameters in the current mode: microphone, radio, speaker, etc., it is enough to change it once in any of the items in each mode. It affects the sixteen-level volume control, and, in fact, the overall volume of all ( or almost all, here it’s a little unclear to me myself) items of each of the three modes.
Do not confuse!
black font, next to the names of the parameters - the new values \u200b\u200bthat I set when setting up the phone are indicated.
[In blue in square brackets] - the standard values of the parameters are indicated, which are set immediately after flashing the Explay Power with the firmware version 1.03 .
Go!
We open the engineering menu in Explay Power, for this we type on the keyboard *39*3646# , and here first let's select the item " Audio" - audio settings:
Set Mode- selects the current mode for tests, you can leave it alone, almost useless thing.
normal mode (normal mode, here you can adjust the volume of the call without a headset and withoutspeakerphone, i.e. via front speaker, key volume, sensitivitymicrophone, etc.):
---
FIR (Explay Power owners on the Internet write that you need to set the value " 2
" or " 3
", this isimproves the audibility of the interlocutor during a conversation and increases the quality of the voice in general - II personally did not notice any obvious changes, but just in case I changed it to " 2
"is worsedefinitely not): 2
(It was : 0
)
---
Speech (the volume of the voice of the interlocutor in the handset):
Volume 0 : 64
Volume 1 : 72
Volume 2 : 100
Volume 3 : 128
Volume 4 : 156
Volume 5 : 208
Volume 6 : 255
16 Level Setting
Max analog gain: 172(change once, and then in normal mode it is the same for all items)
Step : 4 (do not change, it was 4
)
---
key tone (keystroke volume):
Volume 0 : 84
Volume 1: 103
Volume 2 : 123
Volume 3 : 143
Volume 4 : 163
Volume 5 : 183
Volume 6: 203
16 Level Setting
Max analog gain: 172 [112
]
Step : 4
---
Melody (the volume of the call, namely the call, but NOT the PLAYER):
Volume 0 : 4
Volume 1 : 8
Volume 2 : 20
Volume 3 : 48
Volume 4 : 72
Volume 5 : 100
Volume 6 : 128
16 Level Setting
Max analog gain: 172 [112
]
Step : 4
---
FM Radio (the volume of the FM radio, to be honest, I don’t understand in which of the modes - a loudspeaker or a normal one, and I didn’t check (too lazy) where exactly the volume of the radio depends on this point, because 3 modes: ordinary, speaker and headset, but the radio can only play " into speaker" and " into the earpiece", why then the third mode? But just in case, I changed it, and logically, it is this normal mode that should affect playback through the speaker):
Volume 0 : 16
Volume 1 : 48
Volume 2 : 88
Volume 3 : 112
Volume 4 : 152
Volume 5: 204
Volume 6 : 255
16 Level Setting
Max analog gain: 172 [112
]
Step : 4
---
microphone (microphone sensitivity during a normal call, not through the headset and withoutspeakerphone, you can’t do too much, the interlocutor will hear wheezing and you willhear echoes with frequent pauses, I added just a little bit):
Volume 0 : 192
Volume 1 : 192
Volume 2 : 192
Volume 3 : 192 ---| WHY SUCH STRANGE STANDARD VALUES?!
Volume 4 : 192 ---|
Volume 5 : 192
Volume 6 : 192
16 Level Setting
Max analog gain: 172 [112
]
Step : 4
---
side tone (this parameter in all modes was equal to zero, it is better not to change it, otherwiseconversation you will hear yourself and not the interlocutor, in general, do not touch): 0
LoudSp Mode (loudspeaker mode, this is the same as normal mode, only changesrelated to phone calls and music playback through the player):
---
Speech (speaker volume)
Volume 0 : 16
Volume 1 : 32
Volume 2 : 60
Volume 3 : 100
Volume 4 : 148
Volume 5 : 200
Volume 6 : 255
16 Level Setting
Max analog gain
(change once for all loudspeaker mode parameters, similar to normal mode): 200
Step : 4 (do not change, it was 4
)
---
key tone (the volume of keystrokes during the speakerphone, at the factory settings it is TOO loud, turn it down to a minimum):
Volume 0 : 4
Volume 1 : 4
Volume 2 : 4
Volume 3 : 4
Volume 4 : 4
Volume 5 : 4
Volume 6 : 4
16 Level Setting
Max analog gain: 200
Step : 4
---
Melody (the volume of music playback in the player, while the sound at full volume wheezes a little, but it is loud, but I strongly do not recommend making the player's volume "full", it drains the battery very quickly, and accordingly reduces its service life faster, but it is loud, a little bit of a couple of tracks is sometimes possible, and on quiet tracks it will be especially useful to turn it up louder):
Volume 0 : 4
Volume 1 : 24
Volume 2 : 44
Volume 3 : 96
Volume 4 : 140
Volume 5 : 200
Volume 6 : 255
16 Level Setting
Max analog gain: 200
Step : 4
---
FM Radio (unclear, as in normal mode, which of the modes controls the volume of radio playback through the speaker, but still we change everywhere, the radio itself is usually quiet here, so we do it to the fullest):
Volume 0 : 20
Volume 1 : 40
Volume 2 : 80
Volume 3 : 120
Volume 4 : 148
Volume 5 : 200
Volume 6 : 255
16 Level Setting
Max analog gain: 200
Step : 4
---
microphone (microphone sensitivity when talking using the speakerphone toodo not overdo it):
Volume 0 : 192
Volume 1 : 192
Volume 2 : 192
Volume 3 : 192
Volume 4 : 196 --- Again, something is not right ...
Volume 5 : 200
Volume 6 : 208
16 Level Setting
Max analog gain: 200
Step : 4
---
side tone (do not change again, zero, as in the previous mode): 0
Headset mode (headset mode, this is the same as the previous modes, only changesrelate to talking on the phone and playing music through the headset and its microphone):
---
Speech (the volume of the voice of the interlocutor when talking through the headset):
Volume 0 : 8
Volume 1 : 16
Volume 2 : 32
Volume 3 : 72
Volume 4 : 140
Volume 5 : 172
Volume 6: 203
16 Level Setting
Max analog gain: 186 (as usual, we change only once in any of the paragraphs)
Step : 4 (do not change)
---
key tone (the volume of the sounds of keystrokes in the headset, so that the head does not hurt - turn down):
Volume 0 : 67
Volume 1 : 67
Volume 2 : 67
Volume 3 : 67
Volume 4 : 67
Volume 5 : 67
Volume 6 : 67
16 Level Setting
Max analog gain: 186
Step : 4
---
Melody (the volume of music playback in the headset - add a little):
Volume 0 : 4
Volume 1 : 24
Volume 2 : 92
Volume 3 : 120
Volume 4 : 160
Volume 5 : 200
Volume 6 : 255
16 Level Setting
Max analog gain: 186
Step : 4
---
FM Radio(G the volume of FM radio music playback through the headset, we add as much as possiblelouder, but it's hard to hear):
Volume 0 : 12
Volume 1 : 28
Volume 2 : 88
Volume 3 : 120
Volume 4 : 160
Volume 5 : 200
Volume 6 : 255
16 Level Setting
Max analog gain: 186
Step : 4
---
microphone (headset microphone sensitivity, slightly increase):
Volume 0 : 212
Volume 1 : 212
Volume 2 : 212
Volume 3 : 212
Volume 4 : 212 --- and again the scatter .. why did the developers do this? ..
Volume 5: 212
Volume 6 : 212
16 Level Setting
Max analog gain: 186
Step : 4
---
side tone(as usual - do not change): 0
With the audio settings, everything, go back.
Next, there is a paragraph: Ring tone.
It can be used to listen to the sound standard tunes directly from the engineering menu to understand how much we adjusted the volume ( wheeze don't wheeze), you can try after changing the current mode in the first paragraph Set Mode, but it's best to exit the engineering menu after all the changes, and try to check everything "live" - call the phone, open the player, before that it is advisable to turn off and turn on the phone, because sometimes it starts to fail just after the next reboot - it was I have this once with these settings, everything seems to be fine, but with an incoming call at any volume, the melody wheezes and "like a pipe." Only flashing Power "a helped, now after flashing with the same audio calibrations - everything is in order.
---
Speech enhancement: do not touch, this dregs are still the same, it is not clear how and what, they write on the forums that at this point they change the properties of the DAC (Digital-to-analog converter) of the phone, but we do not need it.
But, however, I risked changing one parameter from there. As the owners of Explay Power write on the forums everywhere and all, you can change one parameter - and the voice of the interlocutor during the conversation becomes cleaner and more legible.
Others say that it increases the high frequencies when talking, which is very good for voice intelligibility. I personally didn’t notice anything like that, but just in case I changed it, maybe it’s really better, but not worse - which is the most important
We open Speech enhancement> select normal mode> select Parameter 6, it should be equal to " 400
", change this value to " 1
"and press OK.
And I changed a lot in the sixth parameter from 400
on the 1
also in Headset and Loudsp mode and everything seems to be fine.
We leave Speech enhancement.
---
Next we see the parameter Max Swing Which is somehow connected with vibration during calls (and SMS or something). And as soon as I did not change it - no difference. So we don’t touch him, he is equal 12800
, let it be.
---
Next item debug info- something related to debugging, you should not go there.
---
And last paragraph in audio options - Auto Record Setting.
There are settings for automatic recording of conversations, this is a useful thing, quietly writes all conversations to the memory card in the folder " Audio". That's just what the hell is this function hidden in the engineering menu, and why is it not in the phone menu Explay power- unclear. Well, okay, the main thing is that there is.
There are two options here:
VM Support
: off [off]- when this option is enabled, the voice recorder has the ability to record conversations in other formats AMR and WAW also in the format VM. It is not clear to me what kind of format this is, the phone easily reproduces such recordings, but how to reproduce this format on a computer *. VM, or convert, it's also not clear to me. Therefore, I did not turn it on, let the recorder write better in WAV in high quality, there is still a lot of space on the flash drive.
And the second parameter Auto Speech Record [off]- enable or disable automatic recording of all conversations.
Everything by audio. After changing all the parameters, do not forget to go back a couple of points so that the settings are saved, and double-check them with the subsequent entry into the engineering menu, suddenly something was not saved, or you forgot to change something - it happens.
This applies not only to audio properties, but also to all changes that you make in the engineering menu.
What else is in the engineering menu Explay power:
network setting- do not touch
GPRS act- tests like, also do not touch
debug info- also it does not interest us
Bluetooth- there are some tests, it's better not to go there
There are two items left: misc." and " device"They are of interest to us.
Let's start simple:
misc.- by selecting this item, 5 parameters appear on the screen:
---
Auto Answer: off [off] (automatic call reception after a few seconds when a headset is connected, turn off, not convenient)
---
RAM Test- when pressed, it tests some memory, you do not need to touch this item
---
memory dump
: off [off]- something is leaking memory), we don’t need it either, we don’t turn it on
---
Internet Application (the item has parameters, they refer to the built-in browser andMMS client, they set the headers that are sent to the opened sites on the Internet,through the built-in browser, for example, this phone can be identified by sites like Nokia N93.
all settings can be changed - but there is no point in this - and even no show-offs):
> User agent
: default
(the title by which the sites will determine the phone model, as I understand it, the sites do not understand the default title, and they do not correctly determine the phone model as Explay Power, but you can install at least N72 - however, I repeat, this makes no sense)
> Accept Header
: WAP 2.0
(the header by which the sites determine in what format to send the site page to the phone)
> MMS Version : MMS 1.0
(MMS version, I don’t know what this parameter affects, let it be 1.0)
---
Auto Test List- a list of tested phone nodes, I don’t know when this test passes (maybe when it is turned on, but it’s unlikely, then it would blink and fart every time it was turned on, but this doesn’t happen), maybe after entering special. code or when connected to certain Chinese equipment for tests - I don’t even know. You don't need to go there and change something!
---
AT misc. there is nothing more to configure, let's go back.
And the last item of the Explay Power engineering menu: device- there are a lot of parameters, but you can only touch some where I was tinkering, THE OTHERS DO NOT NEED TO TOUCH, I don’t know why they are needed, I don’t touch, and I don’t advise you!
I will list everything:
---
LCD - fine tuning display - it's better not to touch it, then you won't see anything on the screen!
---
GPIO- categorically do not touch, I do not know why it is
---
PWM- also incomprehensible, do not touch
---
ADC- and here you can see the voltage of the battery, the voltage of the charger, something similar to the level of current consumed, well, general information useful (especially for battery calibration in Set default level, more on that below).
---
Set default level- item has 5
subparagraphs 4
of which it is better not to touch:
it MainLCD Contrast, PWM 1, PWM2 and PWM 3 We don't touch them, we don't need it.
---
AT Set default level fifth point:
Battary- which is responsible for battery levels, it has 10 parameters(levels), which are responsible, if I'm not mistaken, for the displayed battery level, and indicate to the phone when to turn off the power when charging ( P correct me if i'm wrong
), and as a result of reducing the first two parameters, you can slightly increase the battery life of the phone, BUT IT WILL REDUCE THE BATTERY LIFE SO MUCH, SO JUST YOU(and where to find now a new battery for Explay Power is not clear), I experimentally reduced the first two parameters, now the phone does not seem to turn off at the most inopportune moment:
LEV1 : 3250000 [
3450000
]
LEV2 : 3450000 [
3500000
]
LEV3 : 3550000 [
3550000
]
LEV4 : 3600000 [
3600000
]
LEV5 : 3650000 [
3650000
]
LEV6 : 3700000 [
3700000
]
LEV7 : 3850000 [
3850000
]
LEV8 : 4050000 [
4050000
]
LEV 9 : 9999999 [
9999999
]
LEV 10 : 9999999 [
9999999
]
Basically, as I understand again, correct me if I'm wrong
) - these levels are equal to the battery voltage in volts.
That is, for example, 3250000
= 3.25 volts, and the current voltage can be viewed in ADC, I wrote about this above. According to the current settings, it turns out that the phone will not turn off until the battery is discharged to 3.25 volts, not to 3,45
as it was before with factory settings and after flashing, which will slightly extend one charge, and even though the phone will beep, it will ring and should not turn off ( Explay Power does not disable the function of outgoing calls when the battery is critically low, it will ring until the last breath, but the brand new Explay Power Bank has such a DISADVANTAGE - there is still a lot of charge, but you can no longer make calls, only incoming calls. What about the meaning? Therefore, I like the old Explay Power more, and this is not its only plus compared to the "power bank", the "bank" of course has its pluses - but for me they are not important, I am the owner of Explay Power - and as a "dialer" it completely satisfies my requirements
).
And yet, theoretically, in a very emergency situation, when you need to make a call, you can ambulance call, or call somewhere else, if your phone is turned off, you can try to turn it on ( although most likely without recharging for at least half a minute this will not work) and quickly get into the engineering menu until it turns off, turn down the first level LEV 1, for example up to 3150000 , 3100000 , or even immediately before 3000000 , and a couple of three calls, again, theoretically, you will have time to make - but this is a strong extreme case, you should not do this, you can disable the phone.
After all, it is not known how the phone will behave at such a low voltage (it's like plugging a computer into a power outlet without 220
volt and volt 80
Will it turn on at this voltage? Will it fail and lose data on the disk? Here ..), and I turned down quite a bit, and everything seems to be working fine.
---
Set UART- Here is the port setting. This item is responsible for determining the phone by the computer when connected via a USB cable. When fiddling with settings Set UART, there is a chance to cut down the COM port that appears during the firmware, if you turn it off and mess with the engineer, you won’t be able to flash and return your phone to work, so I don’t go there.
---
sleep mode
: enable [
Enable]- do not change
---
DCM Mode
: enable [
Enable]- do not change
---
FM Radio- in this item of the FM radio settings, it makes no sense to change them, for some reason they are not saved ...
---
PMU register settings- do not touch, I do not know what kind of registers it is.
---
Some of these parameters may be compatible with the new Explay Power Bank, but this is not a fact, since the processors, characteristics, and in the end the dynamics are different.
That's all the engineering menu, and it's okay if you don't go where you don't need to! The most important thing is the sound and the battery.
I made all the volume settings, albeit "by eye", but they allow you to add a little sound in excess of the possible factory settings, for example, in the player, loud tracks will wheeze, and quiet ones will just play louder, which I wrote about earlier.
If I missed something important or made a mistake somewhere, after all, the article turned out to be relatively large, I could confuse or forget something - write about it in the comments to the article, your options and corrections of my calibrations are also welcome.
Updated: 24.09.2013 - 23:25
Error! JavaScript is disabled in your browser! Social bookmarking, inserting bb-codes and emoticons in comments, site search with highlighting of found results and some other site functions are not available!
Please enable JavaScript in your browser settings!
You may be interested in other articles:
it official instruction for Explay N1 in Russian, which is suitable for Android 4.2. If you have updated your Smartphone Explay to a more "fresh" version or "rolled back" to an earlier one, then you should try others detailed instructions operating instructions, which will be presented below. We also invite you to take a look at quick guide user in question-answer format.
Official Explay website?
You've hit the mark, as it contains all the information from the official website of the Explay company, as well as a lot of other useful content.
Settings-> About phone:: Android version(a few clicks on the item will launch the "Easter Egg") [Out of the box" version of Android OS - 4.2].
We continue to set up the smartphone
How to update drivers on Explay
You need to go to "Settings -> About phone -> Kernel version"
How to enable Russian keyboard layout
Go to the section "Settings-> Language and input-> Select language"
How to connect 4g or switch to 2G, 3G
"Settings-> More-> Mobile network-> Data transfer"
What to do if you turned on the child mode and forgot the password
Go to "Settings-> Language and keyboard-> section (keyboard and input methods)-> check the box next to "Google voice input"
.png)
Settings-> Screen:: Auto-rotate screen (untick)
How to set a melody for an alarm clock?
.png)
Settings-> Display-> Brightness-> right (increase); left (decrease); AUTO (automatic adjustment).
.jpg)
Settings-> Battery-> Energy saving (tick)
Enable battery percentage display
Settings->Battery->Battery charge
How to transfer phone numbers from SIM card to phone memory? Import numbers from SIM card
- Go to the Contacts app
- Click on the "Options" button -> select "Import/Export"
- Choose from where you want to import contacts -> "Import from SIM card"
How to add a contact to the black list or block a phone number?
How to set up the Internet if the Internet does not work (for example, MTS, Beeline, Tele2, Life)
- You can contact the operator
- Or read the instructions for
How to set a ringtone for a subscriber so that each number has its own melody
Go to the "Contacts" application -> Select the desired contact -> click on it -> open the menu (3 vertical dots) -> Set ringtone
How to disable or enable key vibration feedback?
Go to Settings-> Language & Input -> Android Keyboard or google keyboard-> Vibration feedback of keys (remove or tick)
How to set a ringtone for an SMS message or change alert sounds?
Read the instructions for
How to find out what processor is on N1?
You need to look at the characteristics of N1 (the link is above). We know that in this modification of the device the chipset is 1000 MHz.
.png)
Settings->For Developers->USB Debugging
If there is no item "For developers"?
Follow the instructions
.png)
Settings-> Data transfer-> Mobile traffic.
Settings->More->Mobile network->3G/4G services (if the operator does not support, select only 2G)
How to change or add the input language on the keyboard?
Settings-> Language and input-> Android keyboard-> settings icon-> Input languages (checks the ones you need)
Memory status: In this menu item, you can check the memory status of the SIM card or device.
1-line/2-line view: You can set the caller's number to be displayed in one line or two lines.
Chapter 15. Settings.
AT this interface, You can change settings such as time and date, language, call settings, etc.
Profiles
You can install one of the sound profiles.
Standard/Silent/Vibration/Silent ring/Vibration and loud ring.
You can run, customize or rename each profile.
Melodies
For each SIM card, you can set a default or downloaded ringtone and message tone.
Volume
Calls: Adjust the volume for an incoming call.
Messages: You can adjust the volume for the ringtone incoming message.
Signal: You can set the volume of the speaker when talking.
Alarm: You can set the volume of the alarm to suit your needs.
Sound on/off: You can adjust the volume of the device's on/off ringtone.
Call signal
You can choose the type of signal for SIM cards from six suggested options: ring, vibrate, silent, ring after vibration, and vibrate and ring.
SignalSMS
You can select the incoming message alert for SIM cards from four options: Ring, Vibrate, Silent, and Ring and Vibrate.
Reminder
You can select the reminder alert type: Ring, Vibrate, Silent and Vibrate and Ring.
Keyboard tone
You can select the keyboard tone type: silent, Melody 1 and Melody 2.
Battery discharge signal
You can turn on or turn off the low battery alarm. After enabling this function, when the battery power drops to almost zero, you will hear sound signal warning about it.
Sound on/off
You can change the melody that plays when the device is turned on/off.
SIM-menu
When entering this menu, You will have access to various services provided by your telecom operator.
These services are provided by the telecom operator and are not, as such, a function this phone. For getting additional information contact your carrier.
ATyzoyou
· SIM settings.
Standby mode.
Home SIM: In this interface, you can set the dialing options from any of the SIM cards or automatically, as well as the options for receiving and viewing SMS messages.
Also in this menu item, you can change the name of any of the SIM cards inserted into the device.
· Network selection: When you enter a roaming area, the network can switch automatically.
Automatic selection: Your phone will automatically search for the most suitable network to connect to.
Manual selection: The phone will scan for available networks and you can select the network you need.
Forwarding: When using the "Forwarding" function, you can transfer incoming call, to any other number.
All calls: All incoming calls will be forwarded to the number you specified.
If busy: If, when you receive an incoming call, you are already communicating with another subscriber, the call will be transferred to the number you specified.
If there is no answer: When there is an incoming call, if the subscriber does not receive an answer, his number will be transferred to any number you specified.
If not available: If your phone is turned off or out of network coverage, the call will be transferred to the number you specified.
Cancel All: You can clear all settings of all forwarding modes.
· Ban.
For ban available:
outgoing
inbox
Incoming roaming
International call
Calling in international roaming
Cancel All: Cancel all call barring.
Change password: Through the operator you use, you can set a password for call barring.
Call Waiting: You can turn this feature on or off. When this feature is enabled, even if you are talking to another party, a new incoming call will be accepted and put on hold.
Number Visibility: This feature must be supported by your carrier.
Line selection: In this menu item, you can select: Line 1 or Line 2. This function is designed to switch the number if two numbers are registered on one SIM card. If you use a SIM card with one registered number, be sure to set the value to Line 1, otherwise you will not receive incoming calls or messages.
Airplane: You can set this feature to be enabled by default (the feature will be activated automatically each time the phone is turned on). When this function is enabled, all network operations such as SMS, MMS, dialing, WAP Internet will be blocked until this function is disabled.
· Other:
Beep after 50 seconds: After enabling this feature, when you make a call and then talk, you will hear a beep every time after 50 seconds of talking.
Connection Alert: When enabled, you will feel a vibration every time the called party receives your call.
Answer/Reject Mode:
Reject, answer by SMS: When you receive an incoming call on your phone, you will have the "reply with SMS" function.
Anykey answer: When enabled given function, you can answer incoming call when you press any key other than the “right functional” and “red” keys.
Auto Redial: You can enable or disable this feature. If this feature is enabled, the number will be redialed automatically when a call fails.
Telephone
· Time and date: You can set the date and time on the phone, as well as the mode of their display on the display.
· Language: You can choose English and Russian.
· Do not use or store your phone in a dusty or dirty environment. This can lead to failure of moving components.
Protect your phone from impact high temperature. Higher temperatures will shorten the service life electronic devices, battery failure, may warp or melt certain plastic parts of the phone.
· Avoid prolonged exposure to low temperatures. When the phone is subsequently heated (up to normal temperature) Moisture may condense inside and cause damage to the electronic circuit phone.
· Do not attempt to open the phone case yourself. If you are not qualified, you may damage its parts and components.
· Avoid dropping, bumping or shaking your phone. Rough handling may damage the internal components of the machine.
· Do not use harsh chemicals, solvents, or strong detergents to clean your phone.
· Do not paint the phone. Paint can bleed between moving parts and make it difficult to correct work device.
All of the above recommendations apply equally to the phone, battery, charger and any other accessories. If any of these devices do not work properly, contact the EXPLAY service center. Our specialists will help you and, if necessary, arrange service
Security questions
Driving safety
Do not use a mobile phone while driving.
Be sure to fix the phone in the holder; do not place the phone on the passenger seat or in a place where it could fall in the event of a collision or sudden stop.
Remember that road safety is a top priority!
Working conditions
Comply with any applicable special laws and
Be sure to turn off your phone in places where it is prohibited to use it or where it may cause interference or danger.
Use the phone only in its normal operating positions.
The phone contains magnetic components. The phone can attract metal objects and hearing aid wearers do not need to hold the phone close to their ear. Be sure to secure the phone in the holder, as metal objects can be attracted to the phone, especially the speaker. Keep credit cards and other magnetic media away from your phone as this may result in data loss.
Electronic devices
Modern electronic equipment is shielded from radio signals. However, some electronic devices may not be shielded from mobile phone radio signals.
Electronic pacemakers
Manufacturers of electronic pacemakers recommend that you keep your mobile phone at least 20 cm away from the pacemaker to avoid possible influence of the phone's radio emission on the pacemaker. These recommendations do not contradict the results of independent studies and the recommendations of Wireless Technology Research.
People who use an electronic pacemaker:
· Always keep the phone on at a distance of more than 20 cm from the pacemaker.
· Never carry your phone in your breast pocket.
· When speaking, hold the phone against the ear farthest from the pacemaker to minimize radio interference.
· If you have any reason to suspect that there is interference, turn off your phone immediately.
Hearing Aids
Some mobile phones can be used with hearing aids. If interference occurs in this case, contact your service center for assistance.
Other medical equipment
Interference from radio transmitting equipment, including mobile phones, can interfere with the operation of improperly protected medical equipment. Consult with physicians or manufacturers of medical equipment regarding the correct shielding of devices from external radio radiation. Switch off your phone when entering health care facilities where there are signs not to use mobile phones. Clinics and health centers may operate equipment that is sensitive to external radio emission.
Vehicles
Radio signals can adversely affect the performance of improperly installed or improperly shielded automotive electronic systems(e.g. electronic fuel injection systems, electronic anti-lock braking systems, electronic speed control systems, airbag control systems). Consult the manufacturer or its representatives regarding your vehicle. It is also necessary to obtain information from the manufacturer of any equipment installed on your vehicle.
Establishments where mobile phone use is prohibited
Turn off your phone in any institution where it is required by specially installed posters.
Potentially explosive atmosphere
Turn off your phone in areas where there is a potentially explosive atmosphere. Follow all signs and instructions. The appearance of a spark in such a place can cause an explosion or spontaneous combustion and cause personal injury in the flesh to a fatal outcome.
It is recommended to turn off the phone at petrol stations (service stations). It should be reminded of the need to comply with the restriction of the use of radio-electronic equipment in fuel depots (in the area of storage and distribution of fuel), in chemical plants or in places where blasting is carried out.
Areas with a potentially explosive atmosphere are often, but not always, marked with warning signs. Among them, it is necessary to note the holds of ships; plants associated with the processing and storage of chemical products; vehicles running on liquefied gas (such as propane or butane); areas where the air contains chemicals or particles such as fibers, dust or metal powder; as well as other places
Where there is usually a warning to turn off the car engine.
Vehicles
Mobile phones should only be serviced and installed in vehicles by qualified personnel. Wrong installation and maintenance may be hazardous and may void the warranty of this machine.
Regularly check the correct installation and operation of the telephone equipment installed in the vehicle.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts and accessories.
When using a vehicle equipped with an airbag, remember that the airbag inflates with great force. Do not place any items, including installed or portable equipment mobile communications above the airbag or in the airbag deployment area. Wrong installation
Vehicle mobile communications equipment can cause serious injury if an air bag deploys.
The use of mobile phones on board the aircraft is prohibited. Turn off your phone before boarding the plane. The use of a mobile phone in an aircraft can adversely affect various systems aircraft, disrupt work
Intercom networks in an aircraft and moreover may be illegal.
Violation of the above instructions may result in legal action and/or blocking or denial of telephone service to the violator by the operator. cellular communication.
Emergency calls
Important:
This phone, like any other mobile phone, uses a radio signal for communication, which does not guarantee a 100% signal strength in any place. Therefore, you should not rely solely on your mobile phone for emergency communications (for example, when calling an ambulance).
Emergency calls may not be possible on some cellular networks or when using certain network services and/or phone features. For execution emergency call you may need to enable these features first. Study carefully this manual and check with your mobile service provider.
Warranty and service
· The guarantee is provided in accordance with the current legislation of the Russian Federation.
· The warranty is valid for 12 months from the date of sale indicated in the warranty card.
· Repairs during the warranty period are carried out in authorized service centers indicated in the warranty card.
· The warranty is void in the event of damage caused by misuse or negligence. Please keep your warranty card and, if possible, the original packaging. This does not affect your statutory rights.