iPad is tablet computer Apple firm. Since they have nothing to do with operating-led devices Windows systems, then, accordingly, the “hardware” must be looked for compatible. For example, wifi router for ipad - dual band wireless router Apple AirPort extreme.
Contents of delivery
The router is delivered in a white box, on the sides of which there is a photograph of the device, its specifications and, traditionally, a logo in the form of a bitten apple.
In addition to the router, the package includes outdoor unit power supply, a setup guide in Russian and a warranty card. I was surprised that the power supply is external, and not traditionally for the company integrated into the device itself.
The appearance of the router
FROM appearance devices are fine. The router for ipad has a square shape with rounded corners. The case is made of white plastic - this material is necessary for the operation of four internal antennas. On the front panel of the device there is a multifunctional multicolor indicator.
All ports and connectors are located on the back of the router:
- Power supply input;
- USB 2.0 port;
- 3 gigabit LAN ports;
- 1 gigabit WAN port;
- Reset button recessed into the case;
- Kensington Castle. (A small hole for installing a lock against theft).
Setting up a router
In the next chapter, we will look at how to connect an ipad to a router. Setting up AirPort Extreme is only made with special program already included in standard set operating room programs Mac systems OS X. A version for Windows has also been developed, which can be downloaded from the official Apple website - http://www.apple.com/ru/. Let's use the Windows version as an example.
The router can be configured in two modes - mode step by step setup, in which are installed basic settings devices, and mode full access to all functions for more experienced users. In addition to directly setting the parameters, this program allows you to programmatically restart the router, save the changes made, restore the factory configuration, connect and display the list of wireless clients, view the recorded operation logs. After making changes in the settings, you need to update the device configuration by clicking the “Update” button in the window. The update lasts almost a minute, at the end of which the router automatically reboots.
At the top of the settings window there are five icons with links to settings - "AirPort", "Internet", "Printers", "Disks" and "Advanced".
AirPort Menu
When you click on the first of them, we get to the device status page. On it you can see the firmware version, serial number router, MAC addresses of all interfaces, the status of the Wi-Fi module, and others.
The ipad 2 router is equipped with an internal clock that can automatically synchronize the time with an accurate time server when it detects an Internet connection. AirPort will also check for an Internet connection when it detects an Internet connection. new firmware for this device model, and if it is detected, the LED on the front panel of the router will start flashing.
Wireless part of the router
The router is designed as a dual-band access point (2.4 and 5 GHz). It is noteworthy that both frequencies can be available at the same time.
On the page " additional options» we can limit the power wireless transmission or hide the SSID (name wireless network).
Additionally, you can create a guest wireless network with limited rights - with your own network name and other security settings. Clients of this guest network will only have access to the Internet, but they will not be able to connect to Apple settings AirPort Extreme.
Guest wireless network
Internet setup
When setting up to the Internet, the user is given a choice between two options for connecting to the provider - a direct connection (permanent or dynamic IP) or via the PPPoE protocol. It is also possible to configure the operation of the router in bridge mode or the mode of operation of the router without NAT.
The AirPort software has a built-in diagnostic system that checks the availability of the Internet, detects interface configuration conflicts, and other possible network problems. If any are found, the program makes recommendations for correction. (For example, for the "double NAT" mode, the program will offer to switch the device to the "Bridge" mode). DHCP server, built into the router, can assign fixed MAC-IP mappings.
All network users have the same access rights to all volumes. User identification can be set according to any of three rules - device password, disk password, or user list. In the case of a list of users, you will need to create a list of names and passwords in the AirPort program itself, be sure to specify the type of access - read only or read and write. The rights of guests are also configured there (read-only, read-write, no access).
Printers option
There is only one page in the "Printers" item, which displays a list of connected printers. network printers with the ability to change their network names.
External NAS
You can also connect to the device wirelessly external drives. The router supports reading and writing external media, recognizes file systems FAT32 and HFS+. Disks can be divided into multiple partitions.
For more detailed instructions on setting up a router running Mac OS X version 10.5 + Windows, see the Apple website: http://manuals.info.apple.com/ru_RU/Designing_AirPort_Networks_10.5-Windows_RS.pdf
This article will be useful for all tablet owners from Apple– iPad and iPad mini. I would even say for novice users, for those who first met with the iPad tablet. After buying an iPad, joy and other emotions, you need to set up our tablet and be sure to connect it to the Internet. If you didn't connect your iPad to Wi-Fi during the first set up, you can connect it to the internet later and it's not difficult at all. But, if you have not encountered Apple technology before, then you may have questions about this.
I think it's no secret to anyone that without an Internet connection, a tablet is generally a useless thing. The iPad is no exception. And in order to use your tablet to the fullest, you need to connect it to a normal Internet. Can use either Wi-Fi or 3G/4G (if you have a 3G or 4G version). But, everything is fine, you will connect your iPad to Wi-Fi. Since it is either free or not expensive compared to the same 3G. Now let's take a closer look at the connection process iPad tablet mini to a Wi-Fi network.
Connect iPad to Wi-Fi
Open the settings on your tablet.
Let's go to the masonry WiFi and click on the Wi-Fi network you want to connect to.
If the network is secure, a window will appear in which you need to specify a password to connect to Wi-Fi and click the button Connect.
If you entered the password correctly, then your iPad should connect to the wireless network. You can use the Internet, install games and applications with App Store etc.
Delete network on iPad and set static IP and DNS
If you need to delete a network, make sure that the tablet does not automatically connect to it, then simply click on the network to which you are already connected.
Click on the button Forget this network.
And to change the IP address, DNS, and Subnet mask, go to the tab Static in the properties of the desired Wi-Fi network. And set the required parameters.
These are so simple wifi settings. Basically, like all operating system iOS. If your iPad won't connect to Wi-Fi, then the problem is most likely in the settings of the wireless network itself on the router. Check if other devices are connected. And if the tablet connects to the network, but the Internet does not work, then check the provider settings on the router, and again, whether the Internet works on other devices.
Try to delete the network on the tablet, and reconnect. Make sure you are entering the correct password.
Support for this mode appeared in iPhone 3 models. Thanks to him, the iPhone (iPhone) or iPad (iPad) connects to mobile network transmissions when there is no access to WiFi networks. There is "Modem mode" in the settings menu. If it was not there, you can activate the mode like this:
- Open the "Settings" menu and select " cellular". The figure below shows how the item should look in the presence of a mode. (Fig. 1)
- Move the slider for Cellular Data to on.
- In the Cellular Data section that opens, enter your APN, username, and password. The values for these fields are indicated on the official website of your operator. (Fig. 2)
This completes the activation of the mode. A significant difference in the features of its inclusion on different models iPhone is not.
How to share internet from iPhone
If you have an unlimited tariff, you can distribute the Internet from an iPhone in one of 3 ways: via Wi-Fi (Wi-Fi), Bluetooth, or using a USB cable. Each option has its own characteristics.
Through Wi-Fi
This option is convenient and relatively simple. To share Wi-Fi from an iPhone, follow these steps:
- Find the "Settings" section in the phone menu. Select the "Cellular" tab there. In the window that opens, enable 3G/4G network support to increase the data transfer rate to the maximum. (Fig. 3)
- After turning on cellular data, the Modem Mode tab is activated. Open it to enter the password for the Wi-Fi network. It must be at least 8 characters long. (Fig. 4)
- Click "Turn on Wi-Fi and Bluetooth" and try to connect to the created modem from another smartphone. To do this, use the password entered when activating the modem mode. (Fig. 5)
Via Bluetooth
Alternative option creating an access point on an iPhone for distributing Wi-Fi is using Bluetooth mode. To connect it, follow the instructions:
- To activate the "Modem Mode", follow all the steps described in the previous instructions. After that, turn on Bluetooth by moving the slider to the right. (Fig. 6)
- Pair your iPhone with another device (iOS or Android). To do this, click "Create a pair" and enter the password that will be displayed on another gadget.
- When the connection between devices is established, go to "Settings". (Fig. 7)
- In the window that opens, check the box "Internet access". After that, the distribution of Wi-Fi will begin. (Fig. 8)
Via USB cable
An iPhone can also be used as a USB modem connected to a computer or laptop. To distribute Wi-Fi to others mobile devices this way, do the following:
- Connect smartphone to PC ( personal computer) running under Windows by selecting "USB only". (Fig. 9)
- The system should automatically recognize the iPhone and place it in " Network adapters". If it doesn't, restart your PC.
Important: in order for the system to detect the iPhone and install the drivers correctly, the computer must have latest version iTunes.
The iPad is a great travel gadget. It is lighter, more compact and more autonomous than most ultrabooks, not to mention full-fledged machines for work, and the display size is enough for comfortable watching movies and other multimedia and even office tasks. In this article, we have collected several useful tips, thanks to which the journey with the iPad will be as cloudless as possible.
In contact with
We deliberately focused on the iPad without a cellular module (iPad + Wi-Fi), because it is the most affordable model, and roaming is not cheap.
Download music and movies before you travel
"Prepare the sleigh from the summer" - folk wisdom.
In order not to get bored on the road to warmer climes, you need to take care of your leisure time in advance. In most cases, you can’t even dream of any free Wi-Fi on an airplane, train or bus, which is why it’s best to download a TV series or a good movie.
As a player for playback, we recommend using the free VLC. It supports almost all popular formats, so you don’t have to suffer with iTunes (files can be transferred via FTP over the air, fortunately, this feature is available and the channel is configured in a couple of clicks) and you don’t have to convert movies.
Although, if the size of the drive built into the iPad is small, then it will not be superfluous. You see, only one resolution without loss of quality can save the lion's share of space.
Download offline maps
High-quality navigation is no less, if not more, important item on this list. Kilometers of apps will want to help you not get lost, but most of them may not have offline access, so we recommend downloading maps in advance.
The simplest example of acceptable software can be . To download the map, you need to find and click on the name of the settlement you are interested in and press the button " Download».
If necessary, it is possible to increase or decrease the area of the downloaded map.
We also recommend using the cool MAPS.ME application, in which you can download maps of entire countries at once for free with all the sights, shops, establishments and other places.
Turn off Wi-Fi
Be sure to turn off the Wi-Fi module if you are not using it. This is not energy efficient Bluetooth, which literally spares the battery of your iPad. Everyone can do this, and if not, then swipe up from the bottom to open the Control Center, where the Wi-Fi on / off button is located or go to Settings → Wi-Fi.
Safety first
Be sure to activate the “ ” function, which will take care of the safety of data in case the iPad is stolen. Thanks to it, you can easily send a message to your iPad asking you to return the gadget to its rightful owner, you can remotely delete personal data and block the device, and you will also see its location on the map, of course, if it is not turned off and connected to the Internet.
To enable this feature, go to Settings → iCloud → Find iPad and activate the switch opposite the corresponding item.
Also, don't forget to set a lock screen password (don't be lazy and do this even if you don't have a Touch ID fingerprint sensor). To do this, go to Settings → Touch ID and password, and then enter the unlock code.