Installing updates to your operating system improves its performance, security, and capabilities. But there are situations when it is simply impossible to perform it for the operating system. In this article, we will look at ways to help solve this problem.
Fix it program
The first way is to use the Fix it program. This utility was developed by Microsoft and is designed to troubleshoot the Center windows updates. Download and install the program on your computer. By clicking on the link, you can download the program from the official Microsoft website and familiarize yourself with the basic installation steps. Fix it works in automatic mode, so after installing it, just repeat the installation of updates for Windows.
Enabling automatic mode
The second way is to check if it is enabled for them automatic installation. To do this, go to "Start" - "Control Panel"- "System" .
In the settings window, from the drop-down list, select "Install ... automatically". A little lower you can configure what day of the week, and at what time they will be searched, downloaded and installed. Click OK to save your settings.
Update manually
The third way is to install updates manually. To do this, go to "Start" - "Control Panel"- "System" - "Windows Update". In this window, click "Search ...". Then you need to wait a bit and press the button "Install Now".
Overloaded site
The fourth way is that update errors occur due to overloaded websites. In this case, you need to wait 20 minutes and repeat the search again. Usually the problem goes away.
Various bugs
The fifth way - when installing updates, errors may occur. For information about the causes of the error, follow the link "Get help for this error". If you do not have such a link, you can simply enter the error code into a search engine and find information on the Internet. They are usually caused by an unstable internet connection. Check if the computer or laptop is connected to the Internet and search again. You can also use the Fix it program.
Viruses and Defenders
The sixth way is to check your computer for viruses and disable security programs. Sometimes it is the presence of viruses that will not allow you to install updates on your computer. Check your computer for viruses and remove any problems found. You can also try disabling antivirus protection and Windows Firewall during installation.
Not enough hard disk space
The seventh way is to have free space on the system drive. The fact is that in order to download and install them, there must be at least 3 GB of free space on the system disk. This is also necessary for the normal operation of the Windows operating system.
I hope the problem is solved, and in the future you will update your operating system without any problems.
Watch a video on the topic:
Rate article:
Some users may encounter a situation where their operating system won't load for some reason system updates(both for windows OS itself and for its system components). The indicated problem can have many causes, ranging from failures of the update service to the lack of free space on the system drive. In this article I will tell you why Windows 7 Update does not download updates, what is the essence of the problem and how to fix it.
windows update center
The essence of the problem "Windows Update 7 is not downloading updates"
So why won't windows 7 update download updates? The Update Center functionality may fail for the following reasons:
Having determined the reasons that cause problems with updating windows 7, let's move on to the options for solving them.
How to fix windows 7 update dysfunction
So, what to do in a situation if the Windows 7 Update Center does not download updates? I suggest following a series of tips:
net stop wuauserver
ren %windir%\SoftwareDistribution SoftwareDistribution.OLD
net start wuauserver
After executing the commands, we go to the Update Center and try to update the system on our own, perhaps this will help fix the problem "Windows Update 7 does not download updates."
Execute commands on the command line
What to do if windows 7 updates are not installed
Above, I described the situation in which Windows 7 Update does not download updates, the causes of this problem and how to solve it. In this situation, first of all, you should make sure that the corresponding update service is working, and also delete the update files in the cache. If these tools did not work, you should follow the whole set of tips I have described, usually one of them will effectively fix the problem with the Update Center on your PC.
lifehacki.ru
How to install updates for windows 7 if they do not download
When using a PC, sooner or later updates of various programs and utilities are released that become easy to use and expand the horizons of opportunities. They are very important for the system and mean a lot of elements that can provide full functionality and security to the computer. Very often, a failure occurs in which windows 7 updates are not downloaded to the system through the update center. There are not very many reasons for this, and everything can be disassembled in detail.
First you need to diagnose the problem, and identify the cause. To do this, Microsoft has created a special utility called Microsoft Fix It. Download it from the official site and go through the installation algorithm. After installation, try running the update again. The program does everything automatically in the background, and no intervention is required.
Checking system settings
If, nevertheless, the installation did not help, and the updates are still not downloading, then you need to resort to the next method. Namely, check the settings of the system itself. To do this, you need to open the control panel, divided into categories, and find the system and security on it. Next, follow the sub-item "Windows Update". In the window that appears, namely in its left part, there is a Search for updates, by clicking on which you need to select the “Install now” item.
Update requests
If and this way did not help you cope with the problem, and the updates are still not downloaded, then you need to check the number of update requests. To do this, it is better to close all windows related to system update and just wait a while. It is also possible to configure the execution of this operation on a schedule. This is done in the Options Settings tab. It is necessary to set all the recommended parameters, namely setting the update automatically. Do not forget to confirm all the points before closing the page, because in the worst case, you will have to set it up again.
It is possible that an update is necessary for a work computer and a laptop, but the proxy server does not let it through, since they are prohibited by the administrator. To do this, you need to take the laptop home, and make updates from there. If this desktop computer, then there will be no point in dragging. It is better to approach the administrators and tell them about the problem and the methods you have taken to solve it.
Antivirus blocking
Another reason why windows 7 updates are not downloaded through the update center is the antivirus, which, with its characteristics, simply does not allow the update to pass through the system and communication with Microsoft is simply blocked. Viruses themselves can also cause your problem. To do this, you need to check the entire system, and it is better to remove the problems found immediately.
If a firewall is installed, then the following items must be added to the list of exceptions:
- http://*.update.microsoft.com
- https://*.update.microsoft.com
- http://download.windowsupdate.com
if errors occur during the update, then the same fix is needed as described in the first paragraph. He will fix the problem.
Other Methods
You have tried all the methods, but the problem remains unresolved or goes on forever long loading updates and they are not downloaded, then we turn to banality. You can check if there is free space on "Disk C". For system stability, there should be at least 3-5 GB of free space. Also, users of pirated windows version. If such an OS is installed on your device, then just forget about the updates, nothing will work for you.
Related articles: How to update Bios and Windows 7 does not start, startup recovery does not help.
pro-tablet.com
Windows updates are not downloading, what should I do?
As you use any version of windows, problems inevitably arise, speed vulnerabilities and to have modern protection and optimization is needed during the download of updates.
When windows updates are not downloaded and, accordingly, it is impossible to use their installation, this is a significant problem that needs to be solved without delay. long box. Alas, there may be too many problems at the source of the malfunction, although they can be divided into 4 groups: problems with the update center, system malfunctions, blocking outgoing or incoming traffic through an antivirus or firewall, and Microsoft server load.
Update center issues
If windows 10 updates or older versions are not downloaded, then first of all, the service itself responsible for this should be brought into good condition. You can put things in order in it using several methods, which we will consider.
windows includes a component that automatic order performs troubleshooting. It is logical to use it first of all, since for most users this becomes a decisive step in curing the system.
- Click the "Start" button;
- Next, go to the "Control Panel";
- When choosing to view by category, you need to click on the "System and Security" section;
- In the column "Support Center" you need to select the link "Fix typical problems computer";
- Now at the bottom click on "Troubleshoot with windows update".
The method can have a positive effect on troubleshooting when windows 7 updates or any other version are not downloaded. It’s worth being realistic, because this method is not a panacea and may not help, so also use the special Microsoft Fix It or Easy Fix tool.
You can find the utility on the website. After installing it, it will be possible to solve common problems - why windows updates are not downloaded. Since the tool runs in the background, no action is required from the user, just install it.
How to fix the Ntoskrnl.exe error? There is also a problem that indirectly applies to all groups - downloading broken updates. Most likely the files were not completely downloaded and because of this it is not possible to install them.
Regardless of the type of problem (usually due to a connection to the server), you need to download updates on a new one. And you will probably have to find out where windows updates are downloaded in case you manually delete files or check for their presence.
Where are windows 10 updates downloaded? – Along the path C:\windows\SoftwareDistribution\Download. By the way, it is not necessary to do this manually, you can simply use the program removal tool, which displays installed updates. Otherwise, go to the specified path and delete it yourself, then restart the process.
Do not rush, claiming that windows 7,8,8.1 or 10 updates are not downloading, probably the download display window itself was laid, but the process is going fine. Just wait a bit and the window will restore its work or complete it by installing updates.
System failure
Situations are likely when viruses hit the computer by blocking access to the network or access to the Microsoft server. The solution is to remove viruses and then restore the system using a program such as CCleaner. At the same time, you need to check the registry for errors.
Also check the hosts file in the windows section, as some basement firms or " system administrators» contribute regular expressions to block access to the server.
See also: Functions and purpose hosts file
It should be noted that for pirated copies of the windows system, updates will be downloaded and will not, of course, be installed. Therefore, before figuring out why windows updates are not downloading, make sure that you have licensed copy OS.
Blocked by antivirus or firewall
A common problem is when updates to windows 8 or other versions are not downloaded due to the presence of strict Internet connection filtering rules. For the average user, most often the application that blocks the path becomes an antivirus with Internet protection.
The computer restarts itself: causes, how to fix the problem?
In this case, you can add the https://*.update.microsoft.com rule, which will remove filtering for all subdomains of this site.
Another option is to simply disable protection while downloading and installing updates. Similar actions must be performed for the firewall.
Microsoft Server Issues
The reason is not DDOS attack, but in the excessive workload of the site. The failure occurs especially often when any major, weighty, and expected updates are released, with millions of users trying to download the updates.
Here, it would be most reasonable to simply wait for the hype to subside for a day or two and manually start the update or add the procedure to the scheduled tasks with a delay for the same period of time.
Alas, here you are not able to change anything and you just have to wait, otherwise the download will be long and painful.
The indicated causes and their solutions help for most cases of failures. You can find out more precisely how to fix downloading updates based on the code of your problem. You can find it in a file called windowsupdate.log, enter the code in a search engine.
If you still have questions on the topic “Why are windows updates not downloaded to your computer?”, You can ask them in the comments
Was the material helpful to you? Leave your review or share on social media. networks:
(1 rating, average: 5.00 out of 5) Loading...
tvoykomputer.ru
windows 7 update not downloading updates
Regular software updates system products is the key to their proper functioning, that is, to the correct operation. There are frequent cases when users do not pay due attention to updates, and then wonder why one or another system element stops working for them. However, not everything depends on the user's inattention, the Update Center can also cause failures that need to be eliminated. Well, as you probably already guessed, in this article I will tell you about what to do if Windows 7 Update does not download updates, how to deal with it at all and what methods are best for this.
Utility from Microsoft
The first method aimed at solving the problem with automatically downloading updates is to download special utility from Microsoft. To do this, I suggest that you go to the official website of the same name and download the program for troubleshooting problems in the Update Center from there. After downloading and installing it, an automatic process will start, aimed at identifying problems in the system related to updates. Of course, there are no guarantees that this method will help fix the problem, it’s worth a try, but you don’t need to put a lot of hope on it.
System settings
Scheduled updates
It is quite possible that automatic updates are not configured for you in automatic mode, I suggest doing this right now. To do this, open the Update Center again, and in the left column, find the Settings item.
A page will open on which you need to check the boxes everywhere, and in the field Important updates select "Install updates automatically", then select the frequency and time. For the settings to take effect, be sure to click OK.
I hope one of these methods will help you solve your automatic updates problem!
learnwindows.com
Windows updates not downloading
Search by computer articles
Windows updates are not downloading.
Useful articles → Articles on windows (XP, 7, Server, Vista)Updates for "windows" are designed to add new options, features and fix critical vulnerabilities in the operating system. All updates are needed to improve. However, updates are not always downloaded to the computer. All updates are aimed at improving the performance of the computer. In order to get the update, you must go to the Window Update Center and click the "Start" button, and then select "All Programs" - " windows update". In the panel that opens, select the "windows" command. The most common reason for this is broken licensed program, installed antiviruses, firewalls, changed network configuration In the event that the "windows" update is not downloaded and if next error following commands. regsvr32 wuapi.dll regsvr32 wuaueng.dll regsvr32 wuaueng1.dll regsvr32 wucltui.dll regsvr32 wups2.dll regsvr32 wups.dll regsvr32 wuweb.dll you need to load the following listing: begin SetAVZGuardStatus(True); ClearQuarantine; QuarantineFile("F:\BIRTHDAY\BIRTHDAY\BIRTHDAY\Birthday.exe",""); QuarantineFile("C:\PROGRA~1\COMMON~1\SYMANT~1\SymcData\idsdefs050901.036\symidsco.sys",""); QuarantineFile("C:\DOCUME~1D2~1\LOCALS~1\Temp\RarSFX0\S10VWF\PEDrv.sys",""); QuarantineFile("C:\WINDOWS\system32\drivers\pctplsg.sys",""); Rebootwindows(true); end. You can also open the “windows\System32” folder and find files with the wu*.dll extension. Next, call regsvr32, regsvr32 wuapi.dll for each. After these steps, you should restart your computer and open the control panel - service administration. Then you need to run "automatic update". Also, be sure to check the operating system for an updated reliable antivirus program, such as Kaspersky Anti-Virus.
Problems with updates can definitely arise at inopportune times. Moreover, the reasons here whole line, so we advise you to study the manual better!
Today, this software is a little outdated. However, the popularity of the considered OS is still high. This article will tell you why Windows 7 is not updating through Windows Update and how to fix the problem. Below are a number of methods.
Why are updates needed?
But first you need to understand what these updates are for and what role they play for the user:
- the product ensures the integrity and security of the OS;
- the update provides compatibility with advanced machine parts;
- software optimizes the program code;
- The fix improves the performance and multitasking of the OS.
What are the updates?
All software components are divided into several types:
- important;
- recommended;
- optional;
- other updates.
Important updates pertain to Windows system security. It is recommended to install such packages from the moment they appear in notifications. Recommended components will improve PC performance. The composition of optional components includes various drivers, or updated software from developers. To others, it is worth including those components that were not included in the above.
The OS distribution will not be reconstructed in the future, since Win 8 came out, and then 10. Developers will only support a special range of tools. Fans of the presented version have a lot of time left.
Because of what updates are not installed in the OS?
To date, this may be the following reasons. Before doing anything, you should definitely leave the opportunity Reserve copy data followed by a system restore point. Otherwise, the system may not stand up and the user will lose important data. That's why:
- make a point for rolling back the OS;
- or we will create an image for backup using native tools - the Win 7 archiver;
- or use third-party software and create a similar copy in it.
Incorrect installation
Often incorrect installation lies in the error starting "Update Services". To enter the settings options, just launch the "Start" menu and register - "Services", after which a dialog box with the configuration of the parameters will pop up.
The dialog box will display a list local instruments OS. In the list, we will find "Windows Update". The list is displayed in alphabetical order, which means that the required element will be located at the very bottom. We double-click.
In some cases, the service tool is run offline. It also happens that the problem depends on the launch itself. It is worth checking if the service is running. Most often this is observed on illegal (pirated copy) assemblies of the Win 7 distribution. Softmakers turn off the service on purpose. So let's make sure the local tool is enabled. If not, then turn it on.
The included OS update application should be turned off.
Without leaving the properties dialog box, press the Win + R combination on the keyboard, after which the Run system window will pop up, where we enter: SoftwareDistribution and click OK.
The OS explorer will start with the “SoftwareDistribution” subsystem folder from which you will need to delete all existing folders and files.
Now let's go to the Win 7 local tools configuration window and restart this item again.
After this operation, you will need to restart your PC and go to the "Update Center".
When the working window opens, download the updates and install them. To quickly enter the configuration settings, you will need to call the Start menu and enter the service name you are looking for in the search. In the dialog box, select the "Check for Updates" option.
Install the required update package by clicking on the parameter of the same name.
When you only need to install special updates, then you have to click on the "Important updates" option.
Among the expanded list, we tick off what we need.
Upon completion, we will return to the initial window of the service and enable the installation option.
Errors when downloading updates
Of the most common problems with Win update 7, is a failure during the download to PC. This happens because the files are located and loaded into the OS cache. If the download fails, the installation process will fail. It is worth considering that at the stage of downloading files, the update package will not be able to be overwritten. First you need to uninstall disk space with the contents of the cache, which stores erroneous updates, and only after that download the components.
To clear the cache, open a command prompt. In the Start menu search dialog box, enter the appropriate query - "Command Prompt". Then, let's call context menu and run with administrator rights.
In line Windows commands you need to enter the following combinations:
net stop wuauserver
ren %windir%\SoftwareDistribution SoftwareDistribution.OLD
net start wuauserver
Click "OK". After the cache is cleared, let's start updating the system by restarting the PC.
Errors in the system registry
Most often, errors when installing OS updates occur due to a failure - 80070308. This happens due to the fault of the system registry. To return the system to its original form in the registry, a number of edits should be made. Press Win + R. The Run dialog box will pop up. In the field, enter: regedit and click "OK".
We go to the HKEY_LOCAL_MACHINE section and select the COMPONENTS subfolder in which we delete the PendingRequired. To delete a system file, open the context menu by pressing the right mouse button.
After the operation, restart the PC and perform manual installation updates.
Fix It - automatic solution of problems with the OS
To make it easier for users to troubleshoot such problems, Microsoft has developed a special software called Fix It. It will automatically fix everything. possible mistakes with OS. The utility can be downloaded from the link below.
Let's run the program installation file. The software will build an OS restore point on its own. After the above operations, the detection and elimination of system errors will start. After running the program, close the utility and try to reinstall the updates.
What to do if there is no access to the Internet and the connection to the Microsoft host is blocked by an antivirus or firewall?
If there is no Internet connection, and this is usually a problem with proxy servers or the absence of the Internet itself, the download of updates will not start. If the problem is in the antivirus or firewall, then during the installation, they should be disabled and the appropriate updates should be manually installed.
Unable to update due to lack of memory
The regular inability to install updates for the Windows 7 operating system is due to the lack of free disk space on the hard drive personal computer or laptop. It should be borne in mind that most often the average amount of updates takes up to 5 gigabytes. Before downloading and installing, you will need to free up the occupied disk space on drive C and repeat the whole process again.
Long search for updates
Recently, when installing a clean image of the Win 7 OS, it takes a long time to search for updates. In this case, no errors are observed. The problem is solved in the following way:
- install Microsoft Fix It and reboot;
- restart the PC and install KB3102810 (links are given below!);
- reboot again - everything should be fine.
This may be the reason why Windows 7 is not updated through the OS update center. This completes the troubleshooting step. We will be glad if the information helped you. You can rate the article and write a comment! Share your advice with your friends. Thank you!
The main sensible way to maintain Windows workstations is to timely update anti-virus databases. software, as well as installing all system updates. It is on the latter that I want to focus attention, because these very system updates create significant benefits for user workstations.
Basically, these system updates improve the reliability of the system as a whole, as well as improve the internetwork security. Installing updates as they become available is an important step towards home-like stability. computer networks, and in networks of small business or office.
Therefore, if you want to get rid of current problems, as well as prevent future troubles, the first thing to do is to download and install all the necessary updates on your own. Not without reason, many novice users who complain that Windows 7 is not updated simply do not know how to turn it on correctly.
Important tip: remember, the update will only work properly when your Internet connection is stable and has no restrictions on downloaded traffic. Therefore, if you are a happy owner of a GPRS modem with unfavorable traffic rates, then you can forget about updates. If you have an ADSL modem that provides decent throughput download, you can start setting up.
So if it doesn't work Windows Update 7, first of all, click on the "Start" button and enter "Update Center" in the system search line and press the "Enter" key.
To enable automatic update the easiest way is to go to the "Settings" tab in the update center, select "Install updates automatically (recommended)", select the "daily" update mode in the drop-down menu below, and also set the time at which you plan to download system updates.
At the end, it remains to put all the checkboxes and click "OK".
If win 7 still does not update, it means that either your Internet connection is not stable, or your system is not activated correctly, in other words, it is not professionally “cracked”.
Windows 7 Professional x32 Virtual works fine: CPU=1-3% RAM=468MB
http://update7.simplix.info/)
Windows 7 Ultimate x32 Virtual works fine: CPU=1-3% RAM=545MB
(Installed in turn
Windows6.1-KB3020369-x86;
Windows Embedded POSReady 7 x32 Wirth works fine: CPU=1-3% RAM=548MB
(I installed everything at once
Windows6.1-KB3102810-x86 installation, reboot
Windows6.1-KB3135445-x86 installation, reboot
Windows6.1-KB3020369-x86;
Windows6.1-KB3172605-x86 installation, reboot)
Windows Embedded Standard 7 Full x32 works fine: CPU=1-3% RAM=535MB
(Applied UpdatePack7R2 Update Kit http://update7.simplix.info/)
Windows Embedded Standard 7 Thin x32 works fine: CPU=1-3% RAM=297MB
(Applied UpdatePack7R2 Update Kit http://update7.simplix.info/)
Windows Thin PC x32 Virtual works fine: CPU=0-2% RAM=492MB
(Installed in turn
Windows6.1-KB3102810-x86 check-updated, broken
Windows6.1-KB3135445-x86 test - no results
Windows6.1-KB3020369-x86;
Windows6.1-KB3172605-x86 check-updated, working)
Outcome: Seven operating systems were completely fixed, six of them
Windows 7 32-bit freshly installed in May 2016 in Oracle VM VirtualBox on
Windows 7 Ultimate 64-bit, which worked properly until May 2016 from January
2013 and it had to be repaired ... The value of CPU, RAM when the system is idle is 95-98%
Install updates from Microsoft on your OS manual mode or from the package
set up "Windows Update" as described in the article. Actually, if the system
install from a disc from Microsoft then "Windows Update" is configured
by default "Install updates automatically (recommended)" and
earlier (before the appearance of Eights with Tens) when starting a freshly installed system
he (Center ...) immediately updated himself and immediately loaded 120 = 140 updates and all were
happy ... The system worked stably if the user was not naughty ...
(I saw how they disconnected the computer from the network at the time of installing updates, closed
the cover of the Note when it was intensively updated and the system was denied boot
updates so that traffic remains on "tanks with naval battles")
In Windows 10, for example, the user is not allowed to disable updates, you can reboot
only to configure, because it (the System) is periodically powerfully updated globally:
July 2015 - OS Build 10240, September 2015 - OS Build 10586 Version 1511, and recently
rebooted after the next updates: Oops! Anniversary-Build 14393.222 Version 1607
Windows 10 got habits android google linux
(Horses, people mixed up in a bunch ... Lermontov Borodino)
The report was written as promised, it may be useful to someone, this article inspired me
to find solutions, otherwise I first thought about how to deal with Windows 7 with XP.
I wrote the comments because I found the solution in the comments to the articles.
People help each other. Thank you!
- Lana
THANKS! Found updates. After 3 days of struggle. HURRAH!
Awesomely valuable information that can be read in the help. And what to do if everything is configured correctly. Aren't they even looking for updates?
- Timothy
Victor, do you read the comments on the article? Below is the text and this is for you!
Windows 7 is looking for updates indefinitely 12/19/2015
Microsoft solved the problem and released an update that fixes it.
eliminates. December 2015
Windows6.1-KB3102810-x64
https://www.microsoft.com/en-us/download/details.aspx?id=49540
Windows6.1-KB3102810-x86
https://www.microsoft.com/ru-RU/download/details.aspx?id=49542
If it is not installed, you may not have noticed that in
update center settings you have the setting:
"Install updates automatically (recommended)"
Need to change to:
"Do not check for updates (not recommended)",
to restart a computer
the option should be exactly "Do not check for updates
(not recommended)", since only when it is selected, the search for updates
will not be launched in processes automatically when the computer boots,
and you can't undo it.
The offline installer will search for updates on the PC, "search" will
infinite and will not give any results. Who doesn't
it turns out to install, then the problem may be precisely in this.
After rebooting the system, start the installation of the update
Windows6.1-KB3102810 is very important to download this update
in English. (When downloading, I turned on the Russian read and
uploaded. As a result, it was not installed, uploaded in English
installed immediately and asked for a reboot).
After the reboot, I only turned on the search for updates in the Center
Windows updates immediately showed 251 important and 43 optional
updates available for download.
I turned on the download and the process went 249 updates 835.7 MB.
These are the minor mistakes I made initially, when installing
Windows6.1-KB3102810 updatesWindows 7 is looking for updates for a long time 02 February 2016
Microsoft solved the problem and released an update in December 2015
which removes it.
Windows6.1-KB3102810 solves the problem. December 2015
February 2016
Windows6.1-KB3102810 absorbed 02/02/2016 Windows6.1-KB3135445.
https://www.microsoft.com/ru-RU/download/details.aspx?id=50797
https://www.microsoft.com/ru-RU/download/details.aspx?id=50793
User action algorithm:
1. Download Windows6.1-KB3135445 for your system without changing
English language Microsoft site.
a computer.
4. Install update Windows6.1-KB3135445. Reboot.Windows 7 is looking for updates indefinitely 07/21/2016
Many on the Internet write:
Windows6.1-KB3102810-x64 updates
Windows6.1-KB3102810-x86
for December 2015, unfortunately, they did not help me.
Updates for Windows 7 for x64-based Systems (KB3135445)
Update for Windows 7 for x32-based Systems (KB3135445)
for February 2016, unfortunately, they did not help me.
The problem is solved by installing the following updates:
Windows6.1-KB3172605-x64
https://www.microsoft.com/ru-RU/download/details.aspx?id=53332
Windows6.1-KB3172605-x86
https://www.microsoft.com/ru-RU/download/details.aspx?id=53335
Windows6.1-KB3020369-x64
https://www.microsoft.com/ru-RU/download/details.aspx?id=46817
Windows6.1-KB3020369-x86
https://www.microsoft.com/en-us/download/details.aspx?id=46827
July 2016
The algorithm of actions is stably the same:
1. Download Windows6.1-KB3020369 and Windows6.1-KB3172605 for your
system without changing the English language of the Microsoft site.
2. Stop the protracted search for updates.
3. In the Update Center enable the option:
"Do not check for updates (not recommended)" restart
a computer.
4. Install the update
Windows6.1-KB3020369 and Windows6.1-KB3172605. Reboot.
5. Start searching for updates manually.
After installing them and restarting the computer "Update Center"
I was able to find all the missing updates in 10 minutes.On one of the systems, I put all the updates in order, by
chronology of their release and then launched a search for updates. So less
time spent on repairs in general.December 2015
Windows6.1-KB3102810-x64
https://www.microsoft.com/en-us/download/details.aspx?id=49540
Windows6.1-KB3102810-x86
https://www.microsoft.com/ru-RU/download/details.aspx?id=49542February 2016
Update for Windows 7 for x64-based Systems (KB3135445)
https://www.microsoft.com/ru-RU/download/details.aspx?id=50797
Update for Windows 7 for x32-based Systems (KB3135445)
https://www.microsoft.com/ru-RU/download/details.aspx?id=50793It's best to work with this
UpdatePack7R2 for Windows 7 SP1Install this package http://update7.simplix.info/
Before installation, go to services and disable the center service
updates
(this is not necessary, just the process will go faster)
The package is designed to integrate updates into distributions
Windows 7 SP1 x86-x64 and Server 2008 R2 SP1 x64 and their
installations on working system. The installer works with
any edition of these operating systems, any bit depth and on
any language.
The system must have at least 10 GB of free space on
hard drive and preferably at least 1 GB of free RAM
memory.
The priority of this package is that it not only fixes the functions
Windows Update 7, but also installs into the system
all the necessary updates. At the same time, there is no traffic consumption,
You can partially update without the Internet.
In my system, which worked normally until May, 32
updates and after configuring the Update Center loaded and
installed for the period from 23 to 29 September 202 updates for
Windows and other software from Microsoft.
On a freshly installed system, the installer installs 219
updates in batches: 80 reboot, 80 reboot, 59
reboot and after starting the Update Center instantly finds
30-40 updates for Windows 7 and other software from Microsoft.
The screen went black while the update installer was running.
only the program window showing the update installation process
You should not be afraid of this.The main thing after the work done is the problem of the svchost process and
CPU load (PC processor) is solved up to 1-3%
The operating system runs quietly and effortlessly without
tear -:))
I still have 50-70 screenshots of Operating systems, but I think the Admin will punish me ...
All the best and good luck!!!- Basil
Thank you!
Helped Windows6.1-KB3102810-x64
previously installed the Russian version - it did not help!
Respect and respect to you.
- Basil
Good day to all who suffer! I want to add to the post above. After installing this UpdatePack7R2-16.9.17 package, I took here _http://update7.simplix.info/ downloaded and installed from fifty updates for the system and
other software from Microsoft, only there are “misunderstandings”: it somehow hurts to install updates are coming through the stump into the deck!
PC freezes during installation. The first time I downloaded 24 updates - 22 were installed and froze, then I downloaded 26 - again the computer froze on the 22nd, the third time I downloaded seven and hung on the first update ... I had to press Reset every time and the system started up
like after a crash. For the third time, I even cleaned myself for about 20 minutes. Now everything seems to be normal, but somehow I don’t feel reliable ... I thought that everything would go smoothly on my real 64bit seven and in the virtual machine I would check this package for 32bit (I have six systems installed: Professional, Maximum, POSReady7, Standard7-full, Standard7-thin, Windows Thin PC) I'm not a maniac, I just looked for a system on Acer netbook Aspire One when XP was sentenced, but then I installed a seven 32bit on it and put a dozen 32bit next to it Pro-everything has been working without problems since last fall. I like the Eight more than the tenth, but it is not put on matchboxes of 9 inches, and in 2008, during the crisis, everyone riveted the underbooks ... Danila expands on the topic of the eight and ten, so there are stokers (Windows Modules Installer Worker) they load the system by 50 % install and install some modules, index something, tear the computer for two days, then quiet down and occasionally start up again .... It's cool: as soon as you leave the computer somewhere in the eight and ten, the service starts and these stokers drove the computer into shutdown from overheating in the heat (My AMD did not have time to turn on the temperature already 50) There will be news, unsubscribe, the topic of the Host process in Windows 7 global scale))
Many thanks to the authors of this article, they are great, this site is like a reference book for me. Thank you for providing a platform for communication!
All the best! For Vadim Nikolaevich and all Windows users 7. Who has problems with the update center, go to the site: _http://kakpedia.org/%D1%80%D0%B5%D1%88%D0%B5%D0%BD%D0%BE-windows-7-% D0%B1%D0%B5%D1%81%D0%BA%D0%BE%D0%BD%D0%B5%D1%87%D0%BD%D0%BE-%D0%B4%D0%BE%D0 %BB%D0%B3%D0%BE-%D0%B8%D1%89%D0%B5%D1%82-%D0%BE%D0%B1%D0%BD%D0%BE%D0%B2/ and especially pay attention to the comments to the article. There's a link
_http://update7.simplix.info/
This is an update package for the Seven, I downloaded and installed, after a reboot, Windows Update was restored and after 10 minutes it suggested downloading 24 important and 15 non-important updates ... In a word, the Update Center was restored.
I'll fix the 32-bit ones in VirtualBox and write back about the results. All the best and success!
I agree with Timofeym everything looks like it
For Vadim Nikolayevich: This is not a hint, but a direction for reflection ... Microsoft crushed the toad that more than a billion devices work on the apple system on the ball and they went to the Stakhanov record: By any means, stick Windows 10 to everyone and get their billion, but so far squeezed out somewhere 300 million. The main thing is that somewhere in 2005 new people and new approaches came to Microsoft ... And the mess did not start for children with Vista, this is a long conversation and will take more than one page, let's go back to the seven.
Introducing Windows 10 to the masses, Microsoft silently updated the Update Center and downloaded from 3 to 5 gigs on all PCs new system and then it was proposed to upgrade to the top ten. For many, everything broke down (The system was not installed on old hardware) The consumer restored the seventh, but there were problems, there are two of them: NOT UPDATED and the PROCESSOR loaded from 30% to 80% without visible reasons. The processor is loaded by the host process on which the update service is tied. The system is trying to find a connection with Microsoft and update, but everything is broken there and redone for an updated update center. The operating system is freaking out, nervous, wants to upgrade, sees like an input on the server and a connection of figs! I think they changed the very principle of vparivanie dozens three times. I am not a programmer, but a mechanic at a disability group, and these are just versions ...
There was a lot about CPU usage in networks, such as looking for viruses. I dug the computer almost through, in VirtualBox I installed SIX different sevens (Embedded, standard, thin client) and everyone has the same symptoms, and as a result, you stupidly switch the update center to a non-recommended mode (Do not search ...) and the load on the processor drops to 1% -3% You just say “Don’t worry, well, Microsoft doesn’t want money from traffic , for the money saved, I'll insert a high-speed USB flash drive for ReadyBoost, or rearrange it on an SSD. You turn off updates and it calms down, coolers quiet down, three browsers, Skype, XP in the virtual machine everything flies on 8 Gigabytes of RAM
My conclusions on the seven: Mikey broke it by accident or by a specialist so that everyone switched to the top ten (Nothing personal, just business)
My opinion: The most unique operating system from Microsoft is Windows Embedded POSReady 2009. This is XP professional, only beautiful as Vista, and the RAM takes less than XP, it works somewhere on 220MB of RAM, I installed it on a PC with 8GB of RAM - this space!!! It came out after Vista and a little later than Seven, and support until 2019. It??? How to understand, looking at the vinaigrette in the form of the Tenth. What is Ten? This is a tablet Eight crossed with Vista, which was upgraded to the seven, at the request of insiders from all over the world ... But the main feature of the top ten is to eat traffic recklessly. It's just that it's easier and easier to shovel on traffic than to create something. A dozen, even with a black screen at startup, manage to run to the creators of the site to update and gobble up traffic ... I think that after XP, it was not operating systems that went, but gaming software systems with huge amount dopsoft. And the seventh is rushing to renew itself - they don’t give it, something doesn’t grow together, it beats and doesn’t come out a f ..
Sorry I think so...
Popular operating room Windows system the seventh modification, when installing updates, sometimes refuses to load completely. Users quite often complain that after installing updates, Windows 7 does not start. But they seem to be designed to improve the performance of the system. What is the reason for this phenomenon and what measures can be taken to restore the computer's performance, read on.
Why won't Windows 7 start after updating?
It is worth starting with the root causes of such behavior of the system. It's no secret that today there are a lot of various pirated copies, repacks or stripped-down versions of this OS. Sometimes an official update simply cannot be integrated into the system for purely technical reasons (it lacks necessary components to install them).
On the other hand, it also happens that after updating Windows 7, the system does not start even if there is an official copy. Why? It is difficult to answer this question unambiguously. The fact is that the updates themselves, developed by Microsoft specialists, do not always look finalized, and if you also take into account conflicts with hardware, you yourself understand that there is no need to talk about any performance.
However, in most cases, when Windows 7 does not start after updating, this is purely due to its own components. To fix the problem, you can offer several solutions that usually fix the situation. And it's worth starting with the simplest.
After updating Windows 7, the computer does not start: what to do?
Surely, each user knows that the system provides a function automatic recovery. First, try to force restart your computer a few times. Maybe this tool will work.
If this does not happen, use the F8 key at startup, and select the last known good configuration from the menu. If the recovery works, in the "Update Center" you will need to set a manual search for updates and exclude the last ones found from the list. But this is not an option either.
Sometimes a system restore from removable media can help. There is no complete certainty, but it is worth trying to perform such actions.
Uninstall updates via command line
When Windows 7 does not start after updating, start menu you can select the troubleshooting option and enter the recovery environment where you use command console. The best option would be the same choice, but with the condition of booting from removable media.
To get started in the console, you need to use the select commands system partition, in which updates were installed, as shown in the figure above. The disk digit usually does not change.
Next, you need to enter the command to view recently installed updates (dism /image:D: /get-packages) , after which, via RMB, you need to copy the package identity, highlighted in red in the image above (there may be several updates).
The actual operation of uninstalling packages is to use the uninstall command with an identity number inserted after it (figure above). After completing the procedure, the system must be rebooted. If the start is again impossible, you will have to remove all the latest updates one by one, based on the date of their installation.
Removing patches using Microsoft tools
Also, in a situation where Windows 7 does not start after updating, you can use specialized advanced tools like ERD Commander to create bootable media. The recovery and diagnostics menu will remain the same, but the Diagnostics & Recovery Toolset item will appear at the bottom. And it needs to be used.
After entering the main menu, use the uninstall patches line, after which the corresponding "Wizard" will start. A list of all installed updates will appear in a new window. To be sure, they will have to be removed one at a time, rebooting the system each time and checking its performance. Eventually, when a failed update is found, the system will boot normally.
Note: it is advisable to write down the numbers of all packages, in the "Update Center" set a manual search and exclude updates from the list that have been removed earlier.
Additional measures
In principle, one can also use safe mode if it works. In this case, use command line not required. Failed packages can be uninstalled through the "Update Center" or the section of programs and components, in which the corresponding menu for viewing installed updates is selected. But, again, you still have to uninstall the packages one by one, and not the whole list.
Finally
As you can already understand, the problem is fixed quite simply. As for using the system toolkit, no matter what anyone says, it is best to use bootable media, and not the built-in system toolkit, which, by the way, may not be available. But in general, the main solution comes down solely to removing recently installed updates. Damage to the bootloader was not considered, although, to be sure, you can use commands based on the Bootrec.exe tool with alternately setting additional attributes through the right slash (fixboot, fixmbr, rebuildbcd).