TP-Link routers are one of the most common devices on the domestic market. The popularity of products from a Chinese manufacturer is due to the optimal ratio of price, quality and uptime. And TP-Link's WR740n, thanks to its support for both current and past standards network connections, providing data transfer rates up to 150 Mbps and reliable protection against possible attacks from the outside, has become an excellent solution when building home network.

TP-Link's WR740n router is a high-speed router based on 802.11n technology and compatible with all devices that support IEEE 802.11b/g standards. Its distinguishing feature from models based on these standards is more high speed data transmission and increased by several times the radius of coverage of the wireless network. This allows you to view streaming video, use IP-telephony and play online games without any problems. Thus, TP-Link WR740n combines the capabilities of a modern high-speed router with a budget price with its characteristics.

Appearance

The design of the WR740n model is implemented in accordance with the classic standards of TP-Link devices. The device is enclosed in a stylish plastic case with rounded edges. Elegance is given by the tapered front and the harmonious combination of the black stripe of the indicator panel with the matt white color of the rest of the body.

The TP-Link WR740n indicator panel does not have signatures, but this does not make it difficult to determine their purpose. All indicator windows are made in the form of icons that are intuitive even for a novice user. From left to right on the panel are:

• power indicator;
• built-in self-test indicator. Should flash during normal operation;
• Wi-Fi module;
• LAN ports (four indicators);
• wireless device connection indicator;
• QSS function indicator.

The ports on the back of the device are for local network(LAN) in the amount of four pieces, and one WAN port - for connecting the provider's cable. To avoid confusion between LAN and WAN connectors, the WAN port is color coded. On the sides of the ports there is a connector for connecting the power supply, its on / off button and a non-removable Wi-Fi antenna, and on the other side - the WPS / RESET button.

On the bottom of the case are a cooling grill and holes that allow you to mount the device to the wall. There are no more ventilation devices on the case, therefore, when installing it, care must be taken that there is a gap between the bottom and the surface adjacent to it.

In the center of the bottom of the router there is an information sticker with the main parameters of the device.

Connection and preparation for work

Before proceeding with the settings of the TP-Link WR740n, you must select a location for its location. It would be optimal to place the router in the center of the room so that the distance to it from the most distant corners is approximately the same. It should also be borne in mind that walls, doors and ceilings containing metal elements interfere with signal propagation. The same applies to household electrical appliances: they are not recommended to be located near the router.

After choosing a location for the location of the router, you must do the following:

1. Connect the cable from the provider to the WAN port on the back of the device. If Internet access is via a DSL connection, one of the router's LAN ports must be connected to the modem's LAN port.
2. Connect TP-Link WR740n to the computer with a cable through one of the LAN ports.
3. Power up the device.

On this connection router TP-Link TL model WR740n and its preparation for operation are completed.

Settings

Like other devices of the same purpose, the WR740n is configured through a web interface. To enter it, it is necessary that the computer and the router are in the same address space. In the vast majority of cases, nothing special needs to be done for this, since in TP-Link devices, by default, the DHCP server mode is activated, which automatically assigns an IP address to all connected devices. It remains only to check that in the settings network connection The computer has been set to automatically acquire an IP.

In order to enter the settings of the TP-Link router, you must:

1. AT address bar browser, type 192.168.0.1.
2. In the window that appears, in the "login" line, enter admin and then specify the password in the "password" line. The default username and password in TP-Link routers are identical.

The WR740n router from TP-Link has been around for a long time and has undergone a number of changes. Currently, there are six modifications of this model. Therefore, in older devices, the default address is 192.168.1.1. You can find out for sure from the sticker on the bottom of the router case.

Automatic setting

For users who are uncertain about using a computer, or who do not want to delve into the intricacies of its functioning, the manufacturer provides the ability to configure tp-link tl wr740n routers in automatic mode. Created for this special program supplied with the router on CD.

To use it, you need to take the following steps:

1. Insert the CD into the drive and wait until the setup wizard starts automatically.
2. Select TP-Link WR740n from the list of suggested models and go to the quick installation assistant in the drop-down list.
3. Do not make any changes to the next two steps, click the "Next" button.
4. At the “Router Configuration” step, enter the authorization data received from the provider.
5. Reboot the router for the settings to take effect.

Automatic configuration of the router is also possible using the Easy Setup Assistant universal utility, developed specifically for TP-Link devices. Having launched it, it is enough to click on the "Next" button for the program to automatically guide the user through all the steps of setting up the router. The whole process is accompanied by a demonstration of detailed instructions for connecting and configuring the router.

Connecting to the Internet manually

To connect to the Internet in manual mode, you need to go to the "Network" section in the WR740n web interface and select the "WAN" subsection there. If a dynamic IP is used to connect to the network, just select it in the "WAN connection type" line and save the settings. The Internet must work. In other cases, settings may vary between providers.

Dom.ru and Rostelecom

Setting up an Internet connection for TP-Link routers for these popular providers is carried out in the same way. It can be done in a few simple steps:

1. From the main WR740n settings menu, go to the WAN subsection as described above.
2. Set type PPPoE connections.
3. In the following lines, enter the username and password provided by the ISP.
4. Check the box "Disable" in the line "Secondary connection".
5. Check the box next to "Connect automatically" in the next line.

After completing the settings, you must click on the "Save" button at the bottom of the window. After a few seconds, refresh the page and make sure that the Internet connection is established.

"Beeline"

The Beeline operator, when providing Internet services, uses a VPN connection, therefore TP link setup WR740n in this case has its own characteristics. It is carried out like this:

1. Enter the WAN settings section in the same way as in the previous case.
2. Set the connection type to L2TP.
3. Enter the username and password in the following lines.
4. Check the "Dynamic IP" radio button.
5. In the next line, enter the address of the Beeline VPN server: tp.internet.beeline.ru.
6. Save the settings made by clicking on the appropriate button at the bottom of the page.
7. After a short pause, click on the "Connect" button located immediately below the login and password lines.

If all settings have been made correctly, the Internet connection will be established.

NetByNet

A feature of the NetByNet provider is that when you connect to the Internet, you bind by MAC address. Therefore, the TP-Link router is configured as follows:

1. In the main menu of the TP-Link WR740n settings, in the "Network" section, go to the "MAC address cloning" subsection.
2. In the window that opens, in the "WAN MAC address" line, specify the address registered with the provider, or clone it from your computer.
3. Go to the "WAN" subsection.
4. Set the connection type to PPPoE.
5. Enter username and password.
6. In the "Secondary connection" line, check the "Dynamic IP" radio button.
7. Install automatic connection in the next setting.
8. Save settings and restart your TP-Link.

This completes the configuration of the WR740n model from TP-Link for NetByNet.

Irrespective of the provider, after completing the TP-Link TL WR740n settings, you can no longer start a high-speed connection in Windows. Access to the global network is now fully regulated by the router. Therefore, it is also recommended to clear the routing table in your operating system.

Backup connection via 3G, 4G

Currently, many users as a backup Internet connection use access through mobile operator. But to set up such a connection for your home network, you need a router equipped with a USB port. The WR740n is not suitable for this purpose, as it does not have such a connector.

Wireless network

In order to set up wireless network in the WR740n, you need to go to the "Wireless" tab in the web interface of your TP (« Wireless mode”) and select the “Wireless Settings” item there. Then you need to configure the following settings:

1. In the "Network Name" field, enter the desired name for your wifi connection or leave what is there by default. However, it is recommended that you come up with your own name to make it easier to find your network among other available wireless connections.
2. In the "Region" line, select your country from the drop-down list.
3. Save changes by clicking on the appropriate button.

Now you can proceed to the next step of setting up Wi-Fi. To do this, you need to move to the "Wireless Security" subsection, then do the following:

1. Uncheck the "Disable protection" radio button, if it is checked. Leaving this setting enabled gives free access to the network to anyone within range of a Wi-Fi signal.
2. Mark as active partition WPA-Personal /WPA2-Personal.
3. In the PSK Password field, enter the desired password to connect to Wi-Fi. It must consist of at least eight Latin characters.

This completes the configuration of the wireless network on the WR740n from TP-Link.

Setting up as a repeater (repeater), amplifier, adapter or access point

In cases where the existing wireless network coverage is not enough for the needs of users, it becomes necessary to expand it in some way. To do this, to the main device distributing Wi-Fi,). Many Wi-Fi routers are used in this capacity, including TP-Link.

For this you need:

1. On the main device, in the wireless network configuration, assign a static channel number (the default is “Auto”).
2. Change the IP address to a WR740n designed for use as a client. This is necessary to avoid conflict with the main device. However, they must remain in the same address space.
3. In the "Wireless Settings" section, set the name of the second network and assign a static channel number. It must match the channel number on the main router.
4. Check the box next to "Enable WDS".
5. In the new lines that open, in the SSID item, enter the name of the network to which you plan to connect.
6. By clicking on the "Search" button, select from the list of available wireless networks the one with which you plan to establish a connection and click on the "Connect" link.
7. Set up network security by entering the encryption type and password in the same way as described in the previous section.
8. Reboot WR740n.

Alternatively, flash the TP-Link WR740n using an alternative DD-WRT firmware, which has the "repeater" mode. However, experienced users do not recommend using TP-Link products for this purpose.

IPTV

Currently, most providers, along with the Internet, also provide the service digital television IPTV. WR740n firmware implements its support. To set up this feature, you need to:

1. In the "Network" section, go to the "IPTV" subsection.
2. In the mode line, select "Bridge" from the drop-down list.
3. In the additional field that appears, select the LAN port to which the set-top box will be connected.
4. Save changes.

That's it, the IPTV function on TP-Link is configured.

Individual user connection settings

This functionality is not available in the TP-Link WR740n model.

Dynamic DNS

Users hosting their website or FTP server outside the router may need "Dynamic DNS". With it, it is possible to assign permanent name node and Domain name dynamic IP address. With the TP-Link WR740n at your disposal, it is very easy to do this, since this function is implemented there.

To get dynamic DNS, you need to:

1. In the WR740n main menu, go to the section with the same name.
2. Select a DDNS service provider from the drop-down list.
3. Enter the username and password provided by the provider and specify the domain name.
4. Check the box "Enable DDNS".
5. Save changes.

In the future, enter and exit the DDNS mode using the "Enter" and "Exit" buttons.

Security Settings

To prevent possible attacks on the network from the outside, tp-link routers provide a fairly flexible protection system in the form of a built-in firewall. To configure it in the WR740n, you need to open the "Security" section in the main settings menu. In it, carry out basic or advanced configuration of the firewall:

• enable or disable the firewall (it is enabled by default);
• configure permissions for VPN tunnels;
• configure ALG gateway settings.

In advanced security settings, it is possible to configure Extra options security, in particular, protection against DoS attacks and other settings.

Parental control

For those who need to control the presence of the child at the computer and his activity on the network, the WR740n provides a parental control function.

To change its parameters, you need to enter the section of the same name from the main menu and do the following:

• enable / disable the parental control function;
• add/remove rules for selected resources and set up a schedule for their action.

All bindings for rules are made by the MAC address of the child's computer.

Change button function

This feature is not available on the WR740n.

Setting up DLNA on the router

This feature requires a USB port on the router, which the WR740n does not have.

Setting up a VPN server

The WR740n works with VPN connections only as a client.

Setting up a torrent client on a router

Many users would like to have such an opportunity, but this is unrealistic on the stock WR740n firmware. Attention should be paid to alternative firmware available in sufficient quantity on the Internet. But their use is allowed only at your own peril and risk, without any guarantees for the correct operation of the device.

Printer setup

The WR740n model from TP-Link does not have the ability to configure the printer in its functionality. But if printing is used network printer, which has its own IP address, the router will provide access to it on a par with other devices on the network. It is carried out using a cable connection, and if the printer has Wi-Fi support, then through a wireless network.

Possible malfunctions and ways to eliminate them

Although the WR740n is a reliable device that can function smoothly for many years, problems can also occur in their operation. They are mainly related to errors made during the configuration of the router.

The most common problems in the operation of the device that users complain about are:

1. Unstable operation of the wireless network and low speed downloading through it. In this case, the wired network works fine. Changing the Wi-Fi channel can help solve this problem.
2. Unable to connect to the WR740n web interface at 192.168.0.1. Most likely, the reason for this situation is the change of the IP address of the router to work in a different address space. If it is not possible to install it, a factory reset will help.
3. Devices on the network do not see Wi-Fi. The reason for this may be that the wireless network is disabled on the router. Therefore, you need to connect to it via a wired network and turn on Wi-Fi in the web interface. If everything is active there, check the network connection settings on remote devices, in particular, the correct installation of the wireless network adapter drivers.
4. There is a frequent loss of Internet connection. A firmware update for the WR740n can help resolve this issue.

If none of the methods listed above solve the problem, the cause may be physical damage to the device. In this case, it is better to contact the service center.

Firmware update

Firmware support up to date is important point in ensuring the reliable operation of the TP-Link WR740n. It is recommended to update it immediately after purchasing the device before initial configuration. For this you need to download latest version firmware from the official website of TP-Link. Install new firmware possible in two ways.

Via web interface

This is the easiest way to update the firmware, which requires:

1. In the main menu, go to the " System tools” and select “Firmware update” there.
2. In the window that appears, open Explorer using the "Browse" button and specify the path to the previously downloaded firmware file.
3. Click on the "Update" button.

After the actions taken, the firmware will be updated, after which the router will automatically reboot.

Via mobile app

If you do not have a computer or laptop at hand, and it is extremely necessary to set up the WR740n, you can do this using a tablet or smartphone. For this, TP-Link has developed a special mobile app called TP-Link Tether. It is supported by devices under Android control or IOS and available for download at Google Play and the App Store.

The TP-Link Tether program has user-friendly interface and many features. With its help, the same actions are carried out as in the usual way through the web interface. However, there is no function for updating the firmware in it yet. But the development of the utility continues and it is likely that such an opportunity will appear in future versions.

Via USB device

This function is not available due to the lack of a corresponding connector on the router.

Reset router settings to factory settings

There are situations when the WR740n starts to work with errors that cannot be corrected in standard ways, or you have lost your device password. In this case, resetting the router to the factory settings helps, this is done in two steps:

1. Power on the device.
2. Press and hold the WPS/RESET button on the back of the router for at least 10 seconds.

An indication that the operation was successful is the lighting of all indicators on the front panel of the WR740n. Then release the WPS/RESET button.

If access to the web interface of the router is not lost, reset to factory settings is carried out by going to the system tools section to the corresponding item and clicking on the "Restore" button.

Conclusion

Obviously, the TL WR740n router from TP-Link is recommended for building a home wireless network or a small office network.

pros

The advantages of the device include:

• affordable price;
• ease of setup;
• multifunctionality;
• uninterrupted work.

Creating any wireless network will not do without a router. For everything to work stably, you will have to change the parameters. This article will discuss setting up TP-Link TL wr740n - one of the fairly popular models for home use.

The device will work without problems as the "heart" of a small home or office network, providing a decent connection speed both via cable and wirelessly. The actual number of stably served connections is small. Specifications router will allow you to work normally with no more than ten moderately active users(preferably 5-6). With more of them or a high load of torrents, online games and watching videos, the network will “fall”, which is solved by rebooting.

Video review of the TP-Link TL wr740n router:

Yes, there is not enough USB sweat, a separate Wi-Fi on / off button, the antenna cannot be replaced with a more powerful one (it cannot be removed at all). But those modems that have the above advantages are much more expensive, and not everyone needs to use such functionality.

Appearance and equipment

Externally, the device looks quite decent for its price category. The case is made in a minimalistic black and white style, matte plastic is used as the material. Grooves on top cover have nothing to do with cooling - they are purely for beauty and dust collection.

Heat dissipation is implemented using holes on the bottom panel of the router.

Also on the bottom panel is the mass useful information, which will be needed during the network configuration process.

Front panel

The front panel is quite informative, the state of each of the indicators displays the activity of certain processes. Let's take a closer look at the purpose of each of them, starting from the far left:

1. The indicator of connection to the mains, lights up when plugged into the outlet and pressing the corresponding button on the rear panel;
2. Displays the status of the self test function. In the normal state, flashes 1 time per second, in case of detection system error burns constantly. Flashes rapidly during a factory reset.
3. The Wi-Fi function is active. If blinking, data is being transmitted over the wireless channel.
4. Status of four LAN ports. Steady on when a device is connected. Blinks when transmitting information.
5. When it is solid, it means that there is an active connection on the WAN port (blue on the rear panel). If an ISP cable is included in the port, this means that there is an Internet connection.
6. Fast blinking indicates that the passwordless WPS connection is active. For TP-Link models, this feature is called QSS.

Back panel

In order, what is it for:

1. QSS mode activation button;
2. The hole in which the reset button is located;
3. WAN port to which the provider's cable is connected;
4. LAN ports for interfacing with client equipment;
5. Power button;
6. Connector for connecting the power supply;
7. Antenna.

Equipment

A set of accessories is standard for most of these devices: a power supply, a 1-meter patch cord, a disk with a quick installation utility, and a user manual.

Configuring the router using the utility

This option is simpler and will help novice tuners set the basic equipment parameters.

After the disk is inserted into the drive (with autorun configured), it will start Easy program setup assistant.

The application is designed for many models, in order to enter the settings of the corresponding one, you need to select it from the options offered.

The whole process is intuitive and somewhat reminiscent of working with the installation wizard for conventional software for Windows systems.

A quick way, but its use does not allow you to configure the network in the way that you can do it manually - through the control panel.

Configuring the router through the Web interface

This method is for more experienced users and allows you to fine-tune all the necessary parameters.

First you need to turn on the router to the network and connect it to the computer using the Ethernet wire that comes with the kit (you can use any LAN cable).

First you need the information on the label below, which was already mentioned at the beginning of the article. You need an address and data for authorization (login / password).

Enter the address in the address bar of the browser. The image shows the text version, which is relevant for older models. The most commonly used IP address is: 192.168.0.1

If the address or data for authorization does not fit, you need to reset the settings to the factory settings. To do this, with a thin object, you need to press a secret button on the back panel. During a configuration reset, the star icon on the front panel will flash. Information for entering the management interface can also be found in the instructions of the router.

Main menu

Another fast way configure the network, select "Quick Setup" from the menu on the left.

By following the prompts of the wizard and entering the necessary values ​​provided by the provider, you can make a quick initial setup networks.

Wired Network Settings

The cable connection in the TP-Link TL wr740n router is configured on the Network -> WAN page. Depending on the configuration of the provider's servers, you need to select the type of connection. If on the side of the communication service provider it works DHCP server, then it is enough to select "Dynamic IP address" and confirm the choice by pressing the corresponding button below.

But often providers provide a dedicated IP. In this case, in the settings you need to select "static IP address" and enter the information provided by the operator in the fields.

Another option that can be found, for example, at Rostelecom is PPOE. In this case, you need to enter the login / password, which is also provided by the provider.

WiFi configuration

After dealing with wired internet and got it stable operation, you need to configure the security of your wireless network. To do this, go to the wireless security page, where we select the parameters in accordance with the image.

The WPA-PSK / WPA2-PSK security standard is the most reliable option, and unlike some others, it does not affect the connection speed. After specifying all the necessary data, click the "Save" button and reboot the device.

Subsequent connection via Wi-FI will be possible only with a new password.

Update and Reset

To reset to the factory state, you can use the corresponding item in the control interface.

You can also update the firmware or install other firmware here, such as the previously saved state of the access point. To update, you must first download the file from the TP-Link official website, then select it using the button on the page and click "Update".

Changing the password of the admin panel

Leaving the default admin panel authorization data is not safe, especially if you do not change the password. To replace them, go to the menu item "System Tools" -\u003e "Password". Where you first need to specify the current login / password, then new ones.

In order not to reset the settings to default once again, it is better to write down new data for authorization on paper, for example, in a notepad, in addition, it will not hurt to create text file on PC.

Useful video on setting up a router:

Configure TP-Link TL wr740n using this manual, you can not only from a computer, but also from any mobile device- the main thing is that it has a browser or any other program for opening web pages.

In this manual, we will configure the TP-Link TL-WR740N router. This is a very popular router that is in high demand due to its low price and quality. Many of my friends have the TP-Link TL-WR740N installed, which does its job perfectly. And it was created exclusively for home use. And then, if you have a lot of devices at home, and the house itself is large, then the TL-WR740N may not be able to do its job. This is normal, because this is a budget router.

But, despite its low price, it looks just fine. Beautiful design, matte case, it is possible to hang the router on the wall, all these are undoubtedly pluses. Of course, I would also like to see a power on / off button, and a separate button for turn off Wi-Fi but unfortunately they are not. The only problem is when, when connecting a large number of devices, in online games, when downloading torrents, the Internet may disappear. And the router will often have to reboot. Wrote about it. But this is quite normal for a budget model.

This model has been produced for a very long time, there are already 6 hardware versions, which means that it has already been finalized six times and updated something (in terms of hardware). This router has received many awards and won many competitions. A truly popular model.

Now I will show you how to set up TP-Link TL-WR740N. This will complete instructions on setting up the Internet, Wi-Fi network, and setting a password for a wireless network. Well, consider the process of connecting the router. It doesn’t matter if you have a new router just from the store, or have already used it, the instructions will work for you. However, this instruction is also suitable for Tp-Link TL-WR741ND.

If you have already tried to configure the router, then it would be nice reset TP-Link TL-WR740N. To do this, turn on the power, and hold down the button for 10 seconds. WPS/RESET located on the back of the router.

You can look at the indicators, they should all light up. After that, you can release the button.

We connect the TP-Link TL-WR740N router

We take the power adapter, and connect it to the router. We connect it to the mains. Further, in WAN connector (it is blue) on the router we connect the Internet. Network cable from an internet provider. And if you have Internet through an ADSL modem, then we connect the TP-Link TL-WR740N with the modem. On the router, the cable is in the WAN connector, and on the modem in the LAN.

Now you need to decide from which device you will configure the router. If from a computer or laptop, then I advise you to connect to the router via the cable that comes with the kit. Connect the cable to LAN connector (yellow), and on the computer into the network card connector.

And if you want to configure your TL-WR740N over Wi-Fi, just connect to its Wi-Fi network. If the router is new, then it will have a standard name. For example, I have this: "TP-LINK_9C00". And to connect, use the standard password, which is indicated on the bottom of the router on the sticker.

Just connect to a wireless network. If there is a status "without access to the Internet", then this is normal. This means that you just need to set up a connection to the provider. What are we going to do now.

TL-WR740N: Internet connection (WAN) setup

If you want, you can update the firmware of the router before setting it up. We have a separate instruction for this model:

1. If to connect to the Internet it was necessary to run high speed connection, now it is not needed. It can be removed. This connection will be established by the router, after configuration.

2. If the Internet is already working on your computer through a router, without starting different connections, then most likely your provider uses Dynamic IP connection technology, and you do not need to set up an Internet connection. You can go directly to Wi-Fi setup networks (see below).

We need to go to the control panel.

Entering the settings of the TP-Link TL-WR740N router

If you are already connected to the router, then just open any browser, enter the address in the address bar 192.168.0.1 (on older versions it might be 192.168.1.1), or http://tplinkwifi.net, and navigate through it. Enter your username and password. If you haven't changed them, then admin and admin. Well, if you changed and forgot, then we will reset the settings.

You may still need more detailed, and advice on solving the problem when.

My settings are in Russian. I think you do too. If you have everything in English, and there is no Russian firmware on the Tp-Link website, then write in the comments, I will add the names of the menu sections in English.

Setting up PPPoE, L2TP, PPTP

You must know what type of connection your ISP uses. And all the necessary data to connect: username, password, IP (if needed). This information can be clarified with the provider itself, or in the documents that you received when connecting.

Go to settings tab Net – WAN. On the menu WAN connection type we need to select the type of connection.

If you have a Dynamic IP, then select it and immediately click on the button Save. There are no more parameters to set. Unless, if your ISP does (but this rarely happens). After that, the Internet through the router should work.

And if you have PPPoE, PPTP, or L2TP, then you will need to set the necessary connection parameters that the provider issued.

If you were unable to set up the Internet in this way, then go to the tab Quick Setup, and try setting everything up with step by step instructions. There you can simply select the country, provider, etc. Perhaps this will be easier for you.

Go to the Wi-Fi setup only when the Internet through the router is already working.

Setting up Wi-Fi and password on TP-Link TL-WR740N

Let's move on to setting up a wireless network and setting a password for Wi-Fi. In the control panel, open the tab Wireless mode.

Here we need to change the name of the Wi-Fi network, select our region, and click on the button Save.

To set a password, go directly to the tab Wireless mode – Wireless security.

Here you need to highlight the point WPA/WPA2 - Personal (recommended), set the rest of the parameters as in my screenshot below, and in the field Wireless network password come up with and write down a password that will protect your Wi-Fi. The password must be at least 8 characters long. Click on the button Save and you can immediately click on the link "Press here" to reboot the router.

After the reboot, you will need to reconnect the devices that you connected via Wi-Fi. Already with a new password, and to the network with a new name, if you changed it.

Changing the admin password to enter the settings

I also advise you to go to the settings, and on the tab System – Password change the password that is used to enter the router settings from the standard admin to some more complex one. To do this, you will need to specify the old username and old password, and set new ones. You can leave the username admin, but choose a different password.

Write down the password so you don't forget it. And if you forget, you will need to set everything up again, since you won’t be able to get into the control panel.

Setting up the TP-Link TL-WR740N yourself is not at all difficult. Definitely no more difficult than other models of this manufacturer. The main thing is that the Internet would work through the router, and the status "Without access to the Internet" about which I wrote in the article disappeared on the computer.

Can be configured from a computer (it doesn't matter if you have Windows 10, Windows 7, or another OS) as well as from a mobile device (smartphone, tablet). And if you have a TL-WR740N hardware version 5 and higher, then you can use the proprietary one to configure and manage the router. Everything works, checked.

If you have any questions about setting up this router, then ask them in the comments.

Hello, this is the second article and a series of articles " detailed instructions by setting tp link tl wr740n". If you have not read the first part and , do it. This router model is able to connect to all modern standard types of Internet connections, the most popular of them:

• PPPoE - used by popular providers Rostelecom, Dom.ru, Megaline, ID-Net.
• PPTP with VPN server am - used by providers Aist Togliatti, Ufanet (UfaNet).
• L2TP team connection - modern connection type, Beeline (beeline), Kyivstar have already switched to it.
• Static IP (Static IP) - one of the simple types of connection. It is believed that it has fewer failures and faster data transfer. The provider Triolan works with him.
• Dynamic IP (Dynamic IP) - a forgotten type of connection. I didn't find any providers working on it, given type well suited for connecting two routers via cable.

Entering the router settings interface 192.168.0.1

After connecting the router to the device, let's go to it. To do this, open any browser (Opera, Mazila, Google Chrome, Yandex Browser). In the address bar, we type 192.168.0.1 and press "Enter", an authorization window will appear, here we enter the Username - admin, Password - admin.

Then click on the "Submit" button and we get into the router settings:

Internet connection setup

Now let's get down to the most important part of setting up the tp link tl wr740n router. In this Internet connection setup, you need to be very careful not to miss anything. Otherwise, the Internet will not work for you. In order to proceed with the configuration, go to the “Network” item and select the WAN section.

Here we will be interested in the drop-down menu "WAN connection type", select the type that you need and make the settings described below.

Setting up an Internet connection PPPoE Rostelecom, Dom.ru, Megaline, ID-Net

PPPoE is one of the most popular connection types. This type is used by regional providers such as Rostelecom, Dom.ru. But these are not the only providers that use this type. Write in the comments about which providers you would like to hear and I will definitely write about them. Okay, let's start filling out the form:

1. Choose the type of connection PPPoE/Russia PPPoE.
2. In the fields that appear Username:», « Password:», « Confirm the password:» you need to enter your data, they must be spelled out in the contract. If you don't have them, contact your provider's support. Also, if you are provided with a PPPoE service with a static ip address, in paragraph " Secondary connection:» put a dot next to the inscription « Static IP". What kind of service is provided to you can also be found out from those. support.
3. After filling in all the data, put a dot in front of the inscription " Connect automatically:”, leave the rest of the fields unchanged.
4. Click on the button " Save».

Setting the PPTP connection type Aist Togliatti, Ufanet(UfaNet)

Also, one of the popular connection types is used by many providers. I singled out two: Stork Tolyatti, Ufanet (UfaNet). If you want to know about your provider, write in the comments. The main difference from PPPoE is the use of a VPN server. Immediately I want to indicate the address of the VPN server, those providers that I indicated:

• Stork Tolyatti- server.avtograd.ru
• Ufanet(UfaNet)– pptp.ufanet.ru

If you have a different provider, write in the comments and I will try to find your server. You can also contact support. So, setting up a tp link tl wr740n router PPTP type with VPN servers:

1. Type ofconnections— PPTP / Russia PPTP
2. Username
3. Password- also indicated in the contract, if not - ask those support
4. Select the type of ip address of the service provided. Dynamic IP or Static IP
5. IP address/server name- enter the VPN server of your provider (for two I indicated above).
6. Putting a dot on the opposite Connect Automatically
7. We press the button " Save».

L2TP connection type. Beeline (beeline), Kyivstar

A new type of connection compared to others. The description of L2TP says that this type is an improved version of PPTP and PPPoE. This type in this moment used by companies such as Beeline, Kyivstar, etc. If you have another provider with this type of connection, write in the comments. When setting up L2TP, as in PPTP, you need to specify a VPN server. Let's see what it is like for those providers that I indicated:

• Beeline(beeline)— tp.internet.beeline.ru
• Kyivstar- tp.kyivstar.ua

If you have a different provider, write in the comments, we'll try to figure it out. Let's now answer the question of how to set up a tp link tl wr741nd router for beeline, Kyivstar, and other companies.

1. Type ofconnections— L2TP / Russia L2TP
2. Username- your login in the contract or ask those support
3. Password- also indicated in the contract, if not, ask those support
4. Select the type of ip address of the service provided, Dynamic IP or Static IP. Ask your provider if it's a static option - put an end to it and enter the settings that the provider provided, if it's dynamic - you don't need to enter anything.
5. IP address/server name- enter the VPN server of your provider (for two I indicated above).
6. Put a dot in front of Connect Automatically
7. We press the button " Save».

Yes, that's right, the process is completely identical to setting up PPTP, except for the connection type.

Set up Static IP (Static IP)

Static IP in its purest form is gaining popularity. There is an opinion that providers spend less resources to use it and this increases the quality. But in my opinion, with the development of technology, this type of connection is less secure than, say, PPtP or L2TP. But many companies use it, such as Triolan (if you have a different provider, write in the comments). Also, a static IP is now quite in demand, many sites take into account the IP address during registration, and if you do not have a dedicated one, you will not be able to register. So almost every provider can order the Static IP service and it will add it to the PPtP, L2TP, PPPoE connection types (I wrote about this above). Let's start setting up Static IP on the tp link tl wr740n router.

1. Select connection type Static IP.
2. Cells will appear ip address, Subnet mask, Main gate, and DNS servers. These settings can be obtained from your ISP, or, if you were connected to the Internet, can be obtained from your computer. It is described in detail here.
3. After entering the settings, press the button " Save».

Set up Dynamic IP (Dynamic IP)

The easiest way to connect to the Internet does not require a login or password, unfortunately (or fortunately). Providers that I know of have refused to use this type of connection, as it is the most insecure. But if you have this type of connection as a friend, then the setup is simple: choose Dynamic IP, check that in the fields IP-Address:, Subnet mask:, Default gateway: were received. Also, if the provider uses a special DNS, be sure to write it down. I advise everyone to register "Secondary DNS:" - 8.8.8.8 dns of Google companies ( Google ). The rest of the settings are unchanged. And click "Save".

Cloning a MAC address.

Many providers tie the Internet connection to MAC address one computer as a way to protect. In order for the Internet to work through a router, you need to set that MAC to the router. To do this, you need to go to the section " Net» and select « CloneMAC address". If you are setting up a router on a computer that has been connected to the Internet, you need to click the " CloneMAC address", and then " Save". If not, you need to register the poppy that the provider has and enter it in the field " WAN MAC address:” and press the button “ Save».

Spreading huge amount devices capable of connecting to the Internet using wireless technologies, has led to the fact that the presence of Wi-Fi coverage in a house or apartment has ceased to be something special, but has become more of a necessity. Almost every family has laptops, smartphones and tablets, and all users of these devices need Wi-Fi. To date, creating a wireless network in a small room is very simple, you only need a single device - a router. Below we will talk about the budget, but not only due to this very popular model - TP-Link TL-WR740N. Router setup will also be considered.

Capabilities

Before proceeding to the issues of installing and configuring the router, you should dwell on a description of its main features. This will allow not to make a mistake in choosing a potential buyer of the device. The characteristics of the TP-Link TL-WR740N, combined with its low cost, allow this device to claim the title of one of best solutions for use in an apartment or small house. The device supports modern standards of information transfer in WiFi networks, including 802.11n 2.4 GHz at speeds up to 150 Mbps, as well as commonly used encryption protocols. Internet connection can be made using fixed and dynamic IP addresses, as well as via PPPoE, PPTP and L2TP.

Additional functions

To additional useful features should include support for IPTV, as well as the possibility of implementing port translation. Among other things, the router supports DMZ and UPnP. Setting up the TP-Link TL-WR740N is quite simple, and even a novice user can deal with this issue. Summarizing the above, it is worth noting this model can be recommended for creating a network of 1-3 computers and several mobile devices, that is, for the usual needs of an average user.

Connection

The first thing that is required after buying any router is connecting a cable from the provider to the device, as well as pairing the device with a PC using the patch cord that comes with the router. TP link connection TL-WR740N for configuration, it is desirable to carry out via cable, and not Wi-Fi, we should not forget about it. There are five connectors on the back of the device, one of which is marked in blue (WAN). It is in this blue connector that the cable from the provider is connected. To connect to a PC or laptop, use any of the yellow connectors (No. 1-4). After the network wires are connected and the router is powered from a 220 V socket, you need to press the power button located near the connectors, and you can proceed to configuration. By the way, the TP-Link TL-WR740N scheme, according to which the router connects to other devices, is displayed on the box.

Establishing an internet connection

The main function of each router is to distribute the Internet to other devices. Before implementing this feature, you need to configure TP-Link TL-WR740N to receive Internet from the provider. To do this, you need to use the capabilities of the web interface of the router. Access to the settings is carried out at the address tplinklogin.net or 192.168.0.1, which is entered in the address bar of any Internet browser. After authorization (by default, the login and password correspond to the value admin), a screen will open in which absolutely all the parameters of the router are set. by the most in a simple way to quickly connect the Internet to the router is to use the "Quick Setup" item. Going to this item will launch a special wizard, following the instructions of which you need to determine the network parameters. For most users, configuring TP-Link TL-WR740N in this option comes down to choosing a country, city and provider at the first step of the wizard.

Wireless network settings

In addition to connecting to the Internet, the setup wizard described above allows you to configure the wireless network settings, which are mainly represented by the name of the latter, the password for access, and the type of encryption. You can set your own options, or you can leave the default values. By the way, the default wireless network password is written on a sticker located at the bottom of the device case. Upon completion of entering the necessary data, you must click the "Next" button on the settings screen, and in the next window - the "Finish" button. After the reboot, the device should connect to the Internet and start distributing traffic through the wireless network. If this does not happen, you will have to double-check the correctness of the settings by running " Quick setup" again.

Firmware update

Major manufacturers of network equipment, and TP-Link is no exception, are constantly working to improve software which underlies the operation of their devices. To update the firmware, you need to use the "Firmware Update" item in the "System Tools" menu of the router's web interface. Reflash TP-Link TL-WR740N if available new version firmware on the official website of the manufacturer is highly desirable. In most cases, this procedure improves the stability of the router, and can also bring new features to the device.

Firmware procedure

So, to update the firmware, you need to use the above described tool "Firmware Update". But before proceeding to the procedure, you need to download the firmware file from the official website of the manufacturer. When downloading the file, it is important to consider the hardware version of the router. Information about the revision can be found on the box from the device, as well as on the label located at the bottom of the router case. After the necessary file is downloaded to the PC disk, you need to go to the update tool screen, click the "Select File" button, specify the path to the firmware in the "Explorer" window, and then click the "Update" button. The process of flashing the firmware will begin, and then automatic reboot router.

Conclusion

As you can see, TL-WR740N is a router model that can be recommended to every user with low demands as a basis for creating a home network. At a low cost, this solution seems almost ideal, at least for those who are taking their first steps in the world computer networks or owns a small number of devices that require a Wi-Fi Internet connection.